component
TPS73801DCQR
Public Made by Adomby adom
Texas Instruments Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-223-6. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownTPS73801DCQR
Texas Instruments · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-223-6
TPS73801DCQR from Texas Instruments, in a SOT-223-6. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN | power_in | Power supply input; withstands reverse voltages up to ±20 V; 1-10 µF bypass capacitor recommended if more than six inches from main input filter. |
| 2 | OUT | power_out | Regulated power output (1.21 V to 20 V); minimum 10 µF ceramic output capacitor required to prevent oscillations. |
| 3 | GND | power_in | Ground reference. |
| 4 | FB | input | Feedback input to error amplifier; internally clamped to ±7 V with 3 μA bias current flowing into pin; maintains 1.21 V reference voltage for 1.21-20 V output range. |
| 5 | EN | input | Enable control input; pulling low puts device in low-power shutdown state; can be driven by 5-V logic or open-collector gate with typical current 3 μA; must be tied to IN pin if unused. |
| 6 | GND | power_in | Ground reference. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-223-6 |
| Category | Power Management (PMIC) |
| Pins | 6 |
CAD (KiCad official)
- Symbol:
TPS73801DCQR - Footprint:
Package_TO_SOT_SMD:SOT-223-6 - 3D model: SOT-223-6 (KiCad packages3D, STEP)
- 3D model files:
tps73801dcqr-etched.step/tps73801dcqr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tps73801dcqr.step/tps73801dcqr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (26 pp, sha256
d23a3d05c84bd1a5, retrieved 2026-09-23, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).