component
TPS73733DCQ
Public Made by Adomby adom
Texas Instruments Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-223-6. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
TPS73733DCQ
Texas Instruments · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-223-6
TPS73733DCQ from Texas Instruments, in a SOT-223-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN | power_in | Unregulated input supply; the datasheet gives a recommended VIN range of 2.2 V to 5.5 V. |
| 2 | OUT | power_out | Regulator output; requires a 1.0 µF or larger capacitor of any type for stability. |
| 3 | GND | power_in | Ground pin; connect bypass capacitor grounds directly to this pin and tie the ground plane to it. |
| 4 | NR/FB | passive | On the fixed-voltage TPS73733, this is the NR noise-reduction pin, where an external capacitor from NR to ground filters the internal bandgap noise (the datasheet example uses CNR = 10 nF). |
| 5 | EN | input | Active-high enable: above 1.7 V turns the regulator on, below 0.5 V puts it in shutdown, and it must not be left floating. |
| 6 | GND | power_in | Ground, connected to the package tab, which must be tied to ground for heat dissipation. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-223-6 |
| Category | Power Management (PMIC) |
| Pins | 6 |
CAD (KiCad official)
- Symbol:
TPS73733DCQ - Footprint:
Package_TO_SOT_SMD:SOT-223-6 - 3D model: SOT-223-6 (KiCad packages3D, STEP)
- 3D model files:
tps73733dcq-etched.step/tps73733dcq-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tps73733dcq.step/tps73733dcq.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (50 pp, sha256
08f33fd828893563, retrieved 2026-10-08, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# TPS73733DCQ
**Texas Instruments** · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-223-6
TPS73733DCQ from Texas Instruments, in a SOT-223-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN | power_in | Unregulated input supply; the datasheet gives a recommended VIN range of 2.2 V to 5.5 V. |
| 2 | OUT | power_out | Regulator output; requires a 1.0 µF or larger capacitor of any type for stability. |
| 3 | GND | power_in | Ground pin; connect bypass capacitor grounds directly to this pin and tie the ground plane to it. |
| 4 | NR/FB | passive | On the fixed-voltage TPS73733, this is the NR noise-reduction pin, where an external capacitor from NR to ground filters the internal bandgap noise (the datasheet example uses CNR = 10 nF). |
| 5 | EN | input | Active-high enable: above 1.7 V turns the regulator on, below 0.5 V puts it in shutdown, and it must not be left floating. |
| 6 | GND | power_in | Ground, connected to the package tab, which must be tied to ground for heat dissipation. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-223-6 |
| Category | Power Management (PMIC) |
| Pins | 6 |
## CAD (KiCad official)
- Symbol: `TPS73733DCQ`
- Footprint: `Package_TO_SOT_SMD:SOT-223-6`
- 3D model: SOT-223-6 (KiCad packages3D, STEP)
- 3D model files: `tps73733dcq-etched.step` / `tps73733dcq-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tps73733dcq.step` / `tps73733dcq.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/ds/symlink/tps737.pdf) (50 pp, sha256 `08f33fd828893563`, retrieved 2026-10-08, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/tps73733dcq-datasheet.pdf)