main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers tps73630dbvr: viewers · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md tps73630dbvr: one-pass backfill (citation: different_file) · Ray
tps73630dbvr-etched.glb Publish 0.1.0 · Ray
tps73630dbvr-etched.step tps73630dbvr: factory component page (tier=lcsc) · Ray
tps73630dbvr-hero.glb tps73630dbvr: hero GLB from the etched model (keeps the MPN mark) · Ray
tps73630dbvr-hero.overlay.json Publish 0.1.0 · Ray
tps73630dbvr.glb Publish 0.1.0 · Ray
tps73630dbvr.kicad_mod Publish 0.1.0 · Ray
tps73630dbvr.kicad_sym Publish 0.1.0 · Ray
tps73630dbvr.lbr Publish 0.1.0 · Ray
tps73630dbvr.step Publish 0.1.0 · Ray

TPS73630DBVR

Texas Instruments · Linear Voltage Regulators (LDO) · SOT-23-5

TPS73630DBVR from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 IN power_in Input supply, with a specified input voltage range of 1.7V to 5.5V.
2 GND power_in Ground.
3 EN input Driving the enable pin high turns on the regulator and driving it low puts the regulator into shutdown mode; EN can be connected to IN if not used.
4 NR passive Fixed-voltage versions only: connecting an external capacitor to this noise reduction pin bypasses noise generated by the internal band gap, reducing output noise to very low levels.
5 OUT power_out Output of the regulator, with no output capacitor requirements for stability.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOT-23-5
Category Power Supply Chip
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Output voltage accuracy, nominal VOUT -0.5 0.5 % TJ = 25°C 6
Output voltage accuracy over VIN, IOUT, T VOUT -1 0.5 1 % VOUT + 0.5V ≤ VIN ≤ 5.5V; 10mA ≤ IOUT ≤ 400mA (typ printed as ±0.5) 6
Input voltage range VIN 1.7 5.5 V 6
Dropout voltage VDO 75 200 mV IOUT = 400mA, VIN = VOUT(nom) - 0.1V 6
Output current limit (legacy silicon) ICL 400 650 800 mA VOUT = 0.9 × VOUT(nom), legacy silicon 6
Output current limit (legacy silicon, restricted) ICL 500 800 mA 3.6V ≤ VIN ≤ 4.2V, 0°C ≤ TJ ≤ 70°C 6
Output current limit (new silicon) ICL 500 800 mA VOUT = 0.9 × VOUT(nom), new silicon 6
Reverse leakage current IREV 0.1 10 µA VEN ≤ 0.5V, 0V ≤ VIN ≤ VOUT 6
Ground pin current (legacy silicon) IGND 400 550 µA IOUT = 10mA (IQ), legacy silicon 6
Ground pin current (new silicon) IGND 400 630 µA IOUT = 10mA (IQ), new silicon 6
Ground pin current IGND 800 1000 µA IOUT = 400mA 6
Shutdown current (legacy silicon) ISHDN 0.02 1 µA VEN ≤ 0.5V, VOUT ≤ VIN ≤ 5.5V, -40°C ≤ TJ ≤ 100°C, legacy silicon 6
Shutdown current (new silicon) ISHDN 0.02 1 µA VEN ≤ 0.5V, VOUT ≤ VIN ≤ 5.5V, new silicon 6
EN pin high (enabled) VEN(high) 1.7 V max printed as VIN 6
EN pin low (shutdown) VEN(low) 0 0.5 V 6
Enable pin current (enabled) IEN(high) 0.02 0.1 µA VEN = 5.5V 6
Operating junction temperature (electrical) TJ -40 125 °C 6
Line regulation ΔVOUT(ΔVIN) 0.01 %/V VOUT(nom) + 0.5V ≤ VIN ≤ 5.5V 6
Load regulation ΔVOUT(ΔIOUT) 0.002 %/mA 1mA ≤ IOUT ≤ 400mA 6
Load regulation ΔVOUT(ΔIOUT) 0.0005 %/mA 10mA ≤ IOUT ≤ 400mA 6
Output impedance in dropout ZO(DO) 0.25 Ω 1.7V ≤ VIN ≤ VOUT + VDO 6
Short-circuit current ISC 450 mA VOUT = 0V 6
Power-supply rejection ratio PSRR 58 dB f = 100Hz, IOUT = 400mA 6
Power-supply rejection ratio PSRR 37 dB f = 10kHz, IOUT = 400mA 6
Startup time tSTR 600 µs VOUT = 3V, RL = 30Ω, COUT = 1μF, CNR = 0.01μF 6
Thermal shutdown temperature, shutdown TSD 160 °C Shutdown, temperature increasing 6
Thermal shutdown temperature, reset TSD 140 °C Reset, temperature decreasing 6
Input voltage VIN -0.3 6 V 4
Enable voltage VEN -0.3 6 V 4
Output voltage VOUT -0.3 5.5 V 4
NR/FB voltage VNR, VFB -0.3 6 V 4
Operating junction temperature TJ -55 150 °C 4
Storage temperature Tstg -65 150 °C 4
ESD HBM V(ESD) -2000 2000 V Human-body model, all pins 4
ESD CDM V(ESD) -500 500 V Charged-device model, all pins 4
Input supply voltage VIN 1.7 5.5 V 4
Output current IOUT 0 400 mA 4
Operating junction temperature TJ -40 125 °C 4
Junction-to-ambient thermal resistance, new silicon RθJA 185.2 °C/W DBV (SOT-23) 5 pins, new silicon 4
Junction-to-case (top) thermal resistance, new silicon RθJC(top) 82.9 °C/W DBV 5 pins, new silicon 4
Junction-to-board thermal resistance, new silicon RθJB 53.1 °C/W DBV 5 pins, new silicon 4
Junction-to-ambient thermal resistance, legacy silicon RθJA 221.9 °C/W DBV 5 pins, legacy silicon 5
Junction-to-case (top) thermal resistance, legacy silicon RθJC(top) 74.9 °C/W DBV 5 pins, legacy silicon 5
Junction-to-board thermal resistance, legacy silicon RθJB 51.9 °C/W DBV 5 pins, legacy silicon 5

CAD (KiCad official)

  • Symbol: TPS73630DBVR
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-23-5 (KiCad packages3D, STEP)
  • 3D model files: tps73630dbvr-etched.step / tps73630dbvr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tps73630dbvr.step / tps73630dbvr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet, copy hosted by ti.com (49 pp, sha256 6cf8ac9cdf78f184, retrieved 2026-10-26, tier: lcsc) (the maker's link now serves a different file than the copy stored here)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF