Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

TPS73512DRBR

Texas Instruments · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · VSON-8-EP(3x3)

TPS73512DRBR from Texas Instruments, in a VSON-8-EP(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUT output Regulator output requiring 2.2-µF ceramic capacitor to ground for stability (minimum 2 µF required).
2 NC unconnected Not internally connected.
3 NR passive Noise reduction capacitor connection for fixed voltage versions; external capacitor bypasses band gap noise with maximum recommended value of 0.01 µF.
4 GND power_in Ground; the pad must be tied to GND.
5 EN input Enable control pin; drive high to enable regulator, drive low to shutdown; can be connected to IN if not used.
6 NC unconnected Not internally connected.
7 NC unconnected Not internally connected.
8 IN power_in Input power supply requiring 0.1-µF to 1-µF low ESR capacitor to ground near the device.
9 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package VSON-8-EP(3x3)
Category Power Management (PMIC)
Pins 9

CAD (KiCad official)

  • Symbol: TPS73512DRBR
  • Footprint: Package_SON:VSON-8-1EP_3x3mm_P0.65mm_EP1.6x2.4mm
  • 3D model: VSON-8-EP(3x3), generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 0.9 mm nominal VQFN height). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions are nominal, not the manufacturer's CAD (STEP)
  • 3D model files: tps73512drbr-etched.step / tps73512drbr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tps73512drbr.step / tps73512drbr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (39 pp, sha256 964cb77ae3126fa6, retrieved 2026-10-01, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF