main
History Download
Ray Publish 0.1.0 12e2c81

TPS73219DBVR

Texas Instruments · Linear Voltage Regulators (LDO) · SOT-23-5

TPS73219DBVR from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.

Pinout

Pin Name Type Function
1 IN power_in Input supply pin for the regulator, specified for an input voltage range of 1.7 V to 5.5 V.
2 GND power_in Ground pin for the regulator.
3 EN input Driving EN high turns on the regulator and driving it low puts the regulator into shutdown mode; EN can be connected to IN if not used, and its absolute maximum voltage is -0.3 V to 6 V.
4 NR passive Fixed-voltage versions only; connecting an external capacitor to this pin bypasses noise generated by the internal bandgap, reducing output noise to very low levels.
5 OUT power_out Regulator output, rated up to 250 mA, with no output capacitor requirements for stability.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOT-23-5
Category Power Supply Chip
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input supply voltage range VIN 1.7 5.5 V 4
Output current IOUT 0 250 mA 4
Operating junction temperature TJ -40 125 °C 4
Input voltage VIN -0.3 6 V over operating junction temperature range 4
Enable voltage VEN -0.3 6 V over operating junction temperature range 4
Output voltage VOUT -0.3 5.5 V over operating junction temperature range 4
NR/FB voltage VNR, VFB -0.3 6 V over operating junction temperature range 4
Junction temperature range TJ -55 150 °C over operating junction temperature range 4
Storage temperature range Tstg -65 150 °C 4
Junction-to-ambient thermal resistance RθJA 205.9 °C/W DBV (SOT-23-5) package 5
Junction-to-case (top) thermal resistance RθJC(top) 119 °C/W DBV (SOT-23-5) package 5
Junction-to-board thermal resistance RθJB 35.4 °C/W DBV (SOT-23-5) package 5
Junction-to-top characterization parameter ψJT 12.7 °C/W DBV (SOT-23-5) package 5
Junction-to-board characterization parameter ψJB 34.5 °C/W DBV (SOT-23-5) package 5
VOUT accuracy, nominal VOUT -0.5 0.5 % TJ = 25°C 6
VOUT accuracy, overall VOUT -1 1 % VOUT + 0.5 V ≤ VIN ≤ 5.5 V; VIN, IOUT, and T; 10 mA ≤ IOUT ≤ 250 mA 6
Line regulation ΔVOUT(ΔVIN) 0.01 %/V VOUT(nom) + 0.5 V ≤ VIN ≤ 5.5 V 6
Load regulation ΔVOUT(ΔIOUT) 0.002 %/mA 1 mA ≤ IOUT ≤ 250 mA 6
Load regulation ΔVOUT(ΔIOUT) 0.0005 %/mA 10 mA ≤ IOUT ≤ 250 mA 6
Dropout voltage VDO 40 150 mV IOUT = 250 mA (VIN = VOUT(nom), 0.1 V) 6
Output impedance in dropout ZO(do) 0.25 Ω 1.7 V ≤ VIN ≤ VOUT + VDO 6
Output current limit ICL 250 425 600 mA VOUT = 0.9 × VOUT(nom) 6
Short-circuit current ISC 300 mA VOUT = 0 V 6
Reverse leakage current IREV 0.1 10 μA VEN ≤ 0.5 V, 0 V ≤ VIN ≤ VOUT 6
GND pin current IGND 400 550 μA IOUT = 10 mA (IQ) 6
GND pin current IGND 650 950 μA IOUT = 250 mA 6
Shutdown current ISHDN 0.02 1 μA VEN ≤ 0.5 V, VOUT ≤ VIN ≤ 5.5, -40°C ≤ TJ ≤ 100°C 6
Power-supply rejection ratio PSRR 58 dB f = 100 Hz, IOUT = 250 mA 6
Power-supply rejection ratio PSRR 37 dB f = 10 kHz, IOUT = 250 mA 6
EN pin high voltage VEN(high) 1.7 V EN pin high (enabled) 6
EN pin low voltage VEN(low) 0 0.5 V EN pin low (shutdown) 6
EN pin current (enabled) IEN(high) 0.02 0.1 μA VEN = 5.5 V 6
Thermal shutdown temperature TSD 160 °C Shutdown, temperature increasing 6
Thermal shutdown reset temperature TSD 140 °C Reset, temperature decreasing 6
Start-up time tSTR 600 μs VOUT = 3 V, RL = 30 Ω; COUT = 1 μF, CNR = 0.01 μF 6

CAD (land: KiCad; 3D: generated from the datasheet)

  • Symbol: TPS73219DBVR
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-23-5, generated on the KiCad land (body 1.6 x 2.9 mm, terminals on the pads, 1.175 mm tall, datasheet A, midpoint of min and max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: tps73219dbvr-etched.step / tps73219dbvr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tps73219dbvr.step / tps73219dbvr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (42 pp, sha256 1e4d7505b7ace0bb, retrieved 2026-11-13, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).

Datasheet PDF