component
TPS73201DBVR
Public Made by Adomby adom
Texas Instruments Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-23-5. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
← Commit history
page.json+8−5@@ -38,25 +38,25 @@ "number": "2", "name": "GND", "type": "power_in",- "description": "Device ground reference. Ground pin current is typically 400\u00b5A at 10mA load and 650\u00b5A at 250mA load."+ "description": "Device ground reference. Ground pin current is typically 400µA at 10mA load and 650µA at 250mA load." }, { "number": "3", "name": "EN", "type": "input",- "description": "Enable input (active high). VEN >= 1.7V enables regulator, VEN <= 0.5V puts the device in shutdown (IQ < 1\u00b5A). Do not leave floating. Absolute max 6.0V."+ "description": "Enable input (active high). VEN >= 1.7V enables regulator, VEN <= 0.5V puts the device in shutdown (IQ < 1µA). Do not leave floating. Absolute max 6.0V." }, { "number": "4", "name": "NR/FB", "type": "input",- "description": "On the adjustable TPS73201, this pin is FB (feedback) - connect to the midpoint of an external resistor divider from OUT to GND to set VOUT = (R1+R2)/R2 \u00d7 1.204V. For fixed 1.20V operation, tie FB to OUT. VFB reference is 1.20V typical (1.198-1.210V)."+ "description": "On the adjustable TPS73201, this pin is FB (feedback) - connect to the midpoint of an external resistor divider from OUT to GND to set VOUT = (R1+R2)/R2 × 1.204V. For fixed 1.20V operation, tie FB to OUT. VFB reference is 1.20V typical (1.198-1.210V)." }, { "number": "5", "name": "OUT", "type": "power_out",- "description": "Regulated output, 1.20V to 5.5V (adjustable). 250mA rated output current with 40mV typical dropout. Stable with or without an output capacitor of any value/type; 0.1\u00b5F typical improves noise/transient performance. Current limit 425mA typical."+ "description": "Regulated output, 1.20V to 5.5V (adjustable). 250mA rated output current with 40mV typical dropout. Stable with or without an output capacitor of any value/type; 0.1µF typical improves noise/transient performance. Current limit 425mA typical." } ], "provenance": {@@ -120,5 +120,8 @@ "docs/tps73201dbvr-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }