main
History Download
Ray tps727285dser: specified limits as data (metadata.characteristics, 28 rows from the datasheet) c8cea34

TPS727285DSER

Texas Instruments · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · WSON-6(1.5x1.5)

TPS727285DSER from Texas Instruments, in a WSON-6(1.5x1.5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUT power_out Regulated output voltage pin; 1-μF ceramic capacitor to ground required for stability.
2 NC unconnected No connection; can be tied to ground to improve thermal dissipation.
3 GND power_in Ground reference pin.
4 EN input Enable input; driving above 0.9 V enables regulator, below 0.4 V puts regulator into shutdown mode at 120 nA quiescent current.
5 NC unconnected No connection; can be tied to ground to improve thermal dissipation.
6 IN power_in Supply input pin; small capacitor to ground required for stability.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package WSON-6(1.5x1.5)
Category Power Management (PMIC)
Pins 6

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input voltage range VIN 2 5.5 V Electrical characteristics table, input voltage range 6
Output voltage range VO 0.9 5 V 6
DC output accuracy -2.5 2.5 mV TJ = +25°C 6
DC output accuracy -2 1 2 % VOUT VOUT + 0.3 V ≤ VIN ≤ 5.5 V, 0 mA ≤ IOUT ≤ 200 mA 6
DC output accuracy -1 1 % VOUT + 0.3 V ≤ VIN ≤ 5.5 V, 0 mA ≤ IOUT ≤ 250 mA 6
Load transient output voltage deviation ΔVOUT -50 50 mV 1 mA to 200 mA or 200 mA to 1 mA in 1 µs, COUT = 1 µF 6
Load transient output voltage deviation ΔVOUT -65 65 mV 1 mA to 250 mA or 250 mA to 1 mA in 1 µs, COUT = 1 µF 6
Dropout voltage VDO 130 200 mV VIN = 0.98 × VOUT(NOM), IOUT = 200 mA 6
Output current limit ICL 300 400 550 mA VOUT = 0.9 × VOUT(NOM) 6
Ground pin current IGND 7.9 12 µA IOUT = 0 mA, TJ = –40°C to +125°C 6
Shutdown current (IGND) ISHDN 0.55 2 µA EN ≤ 0.4 V, 2.0 V < VIN ≤ 4.5 V, TJ = –40°C to +85°C 6
Enable pin low (disabled) VLO 0 0.4 V 6
Enable pin current IEN 40 500 nA EN = 5.5 V 6
Undervoltage lock-out UVLO 1.85 1.9 1.95 V VIN rising 6
Operating junction temperature range TJ -40 125 °C 6
Input voltage VIN -0.3 6 V TJ = –40°C to +125°C (unless otherwise noted); all voltages with respect to GND 5
Enable voltage range VEN -0.3 6 V TJ = –40°C to +125°C (unless otherwise noted); all voltages with respect to GND 5
Output voltage range VOUT -0.3 6 V TJ = –40°C to +125°C (unless otherwise noted); all voltages with respect to GND 5
Operating junction temperature TJ -55 150 °C 5
Storage temperature Tstg -55 150 °C 5
Input voltage VIN 2 5.5 V Over operating junction temperature range 5
Output current IOUT 0 250 mA Over operating junction temperature range 5
Operating junction temperature range TJ -40 125 °C Over operating junction temperature range 5
Junction-to-ambient thermal resistance (DSE, WSON 6-pin) RθJA 190.5 °C/W DSE (WSON) 6 pins 5
Junction-to-case (top) thermal resistance (DSE, WSON 6-pin) RθJC(top) 94.9 °C/W DSE (WSON) 6 pins 5
Junction-to-board thermal resistance (DSE, WSON 6-pin) RθJB 149.3 °C/W DSE (WSON) 6 pins 5
Junction-to-top characterization parameter (DSE, WSON 6-pin) ψJT 6.4 °C/W DSE (WSON) 6 pins 5
Junction-to-board characterization parameter (DSE, WSON 6-pin) ψJB 152.8 °C/W DSE (WSON) 6 pins 5

CAD (KiCad official)

  • Symbol: TPS727285DSER
  • Footprint: Package_SON:WSON-6_1.5x1.5mm_P0.5mm
  • 3D model: WSON-6(1.5x1.5) (KiCad packages3D, STEP)
  • 3D model files: tps727285dser-etched.step / tps727285dser-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tps727285dser.step / tps727285dser.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (36 pp, sha256 eb07c4ca05ae7371, retrieved 2026-10-03, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF