component

TPS72615DCQ

Public Made by Adom

by adom

Texas Instruments Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-223-6. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.

componentpower management (pmic)tps72615dcqfactory-2.0.0extractor-text

Verified TPS72615DCQ

by Ray · last 6 Nov 2026 · 1 record · files match
SymbolFootprint3D modelPins

Verification log 1 record

6 Nov 2026RayPublished by the parts factory: tier mfr, 6 pinsfiles match
SymbolFootprint3D modelPinsfor all variants
  • ✓component-page-verify: PASS
  • ✓cad_props: Datasheet, MPN and distributor properties match page.json
  • ✓component: TPS72615DCQ · SOT-223-6 · 6 pins
  • ✓copper: 6 copper pads, none touching another net
  • ✓datasheet: all 6 pin names found in the 23-page datasheet
  • ✓distributor: lcsc C2859829, digikey 2156-TPS72615DCQ-ND, mouser 595-TPS72615DCQ
  • ✓family: SOT-223-6
  • ✓files: 7 declared files present
  • ✓hero: docs/hero.png 4000x2500
  • ✓lbr: OK: /tmp/cpv-8gwke7un/x.lbr is a valid EAGLE .lbr with complete deviceset
  • ✓license: CC-BY-SA-4.0
  • ✓models_3d: 2 records
  • •package_fit (skip): no component.package_dims on the page: the model is unchecked against the datasheet drawing
  • ✓pads: 6 pins = 6 pads
  • ✓pose: 2 STEP(s) Z-up, seated, centred
  • ✓symbol: 6 pins agree
  • ✓symbol_text: no pin names collide
  • ✓visibility: public, source open
Evidencedatasheet
Verified files✓ tps72615dcq.kicad_sym✓ tps72615dcq.kicad_mod✓ tps72615dcq.step
Spot something wrong? Report it as an issue Propose a fix Records are signed by members of adom.
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity
main
Download ZIP Propose a change
Made with KiCad 10.0 · needs KiCad 10.0 or later to open · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray 3h ago
viewers tps72615dcq: viewers · Ray 3h ago
package.json Publish 0.1.0 · Ray 3h ago
page.json Set visibility: public · Ray 3h ago
README.md Publish 0.1.0 · Ray 3h ago
tps72615dcq-etched.glb Publish 0.1.0 · Ray 3h ago
tps72615dcq-etched.step tps72615dcq: factory component page (tier=mfr) · Ray 3h ago
tps72615dcq-hero.glb tps72615dcq: hero GLB from the etched model (keeps the MPN mark) · Ray 3h ago
tps72615dcq-hero.overlay.json Publish 0.1.0 · Ray 3h ago
tps72615dcq.glb Publish 0.1.0 · Ray 3h ago
tps72615dcq.kicad_mod Publish 0.1.0 · Ray 3h ago
tps72615dcq.kicad_sym Publish 0.1.0 · Ray 3h ago
tps72615dcq.lbr Publish 0.1.0 · Ray 3h ago
tps72615dcq.step Publish 0.1.0 · Ray 3h ago
verification.json Verified: Published by the parts factory: tier mfr, 6 pins · Ray 3h ago

TPS72615DCQ

Texas Instruments · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-223-6

TPS72615DCQ from Texas Instruments, in a SOT-223-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 ENABLE input Enable input, with high level at least 1.3 V and low level at most 0.4 V (standby below 0.4 V), and absolute maximum of -0.3 V to VI + 0.3 V.
2 IN power_in Input supply voltage, operating range 1.8 V to 6 V, absolute maximum 7 V, with a 1-uF or larger ceramic bypass capacitor to GND required.
3 GND power_in Ground.
4 OUT power_out Regulated output voltage (1.5 V for TPS72615) with up to 1 A continuous output current.
5 RESET output Open-drain active-low RESET output that needs a pull-up resistor and asserts when the regulator output drops more than 5% below nominal, with a typical 200 ms delay.
6 GND power_in Package tab, which is GND and is used as a heatsinking connection to the board copper plane.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOT-223-6
Category Power Management (PMIC)
Pins 6

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts copper regulator is mounted provides some heatsinking through the pin solder connections. Some packages, like the DDPAK and SOT223 packages, use a copper plane underneath the package or the circuit board's g 9

CAD (KiCad official)

  • Symbol: TPS72615DCQ
  • Footprint: Package_TO_SOT_SMD:SOT-223-6
  • 3D model: SOT-223-6 (KiCad packages3D, STEP)
  • 3D model files: tps72615dcq-etched.step / tps72615dcq-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tps72615dcq.step / tps72615dcq.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (23 pp, sha256 493da09fb6721c46, retrieved 2026-11-06, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF