main
History Download
Ray Publish 0.1.0 7d8fbae

TPS72201DBVR

Texas Instruments · Linear Voltage Regulators (LDO) · SOT-23-5

TPS72201DBVR from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.

Pinout

Pin Name Type Function
1 IN power_in Input supply voltage with an operating range of 1.8 V to 5.5 V and an absolute maximum input range of -0.3 V to 7 V.
2 GND power_in Ground terminal, which carries the quiescent (ground pin) current of typically 85 µA during normal operation.
3 EN input Enable input: a logic high (VIH min 1.4 V) enables the output and a logic low (VIL max 0.4 V) shuts it off, with an absolute maximum of 7 V.
4 NC/FB input On the TPS72201 adjustable version this is the feedback input (FB), which sets the output through an external divider referenced to Vref = 1.225 V typ; on the fixed-output versions it is not connected and must be left floating, not tied to GND.
5 OUT power_out Regulated output voltage, which requires a 0.1 µF ceramic bypass capacitor for stability and supplies up to 50 mA continuous output current.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOT-23-5
Category Power Management ICs
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input voltage VI 1.8 5.5 V 3
Continuous output current IO 0 50 mA 3
Operating junction temperature TJ -40 125 °C 3
Output voltage accuracy (printed as multiple of VO, adjustable version) VO 0.97 1.03 VO 0 µA < IO < 50 mA, 1.2 V ≤ VO ≤ 2.5 V 3
Current limit 175 525 mA See Note 2 3
Output voltage line regulation (ΔVO/VO) ΔVO/VO 0.1 %/V VO + 1 V < VI ≤ 5.5 V 3
Output voltage line regulation (ΔVO/VO), TJ = 25°C ΔVO/VO 0.03 0.09 %/V TJ = 25°C 3
EN high level input voltage VIH 1.4 V 3
EN low level input voltage VIL -0.2 0.4 V 3
Dropout voltage (TPS72201) VDO 100 mV IO = 50 mA, 1.2 V ≤ VO ≤ 5.2 V 3
Feedback input current (TPS72201) 1 µA 3
Quiescent current (GND terminal current), IO = 0 IQ 85 120 µA TJ = 25°C 3
Quiescent current (GND terminal current), IO = 50 mA, TJ = 25°C IQ 275 µA IO = 50 mA, TJ = 25°C 3
Quiescent current (GND terminal current), IO = 50 mA IQ 550 µA IO = 50 mA 3
Standby current, TJ = 25°C 0.01 µA EN < 0.5 V, TJ = 25°C 3
Standby current 1 µA EN < 0.5 V 3
Reference voltage Vref 1.225 V TJ = 25°C 3
Thermal shutdown temperature 170 °C 3
Thermal shutdown hysteresis 20 °C 3
Input voltage range -0.3 7 V 2
Voltage at EN -0.3 7 V 2
Voltage on OUT, FB, NC -0.3 V Printed maximum is VI + 0.3 V 2
Operating virtual junction temperature range TJ -40 150 °C 2
Storage temperature range Tstg -65 150 °C 2
Thermal resistance junction-to-ambient, Low K board RθJA 259 °C/W Low K (1s) JEDEC board 2
Thermal resistance junction-to-ambient, High K board RθJA 180 °C/W High K (2s2p) JEDEC board 2
Thermal resistance junction-to-case (bottom) RθJC 65.8 °C/W 2

CAD (land: KiCad; 3D: generated from the datasheet)

  • Symbol: TPS72201DBVR
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-23-5, generated on the KiCad land (body 1.6 x 2.9 mm, terminals on the pads, 1.175 mm tall, datasheet A, midpoint of min and max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: tps72201dbvr-etched.step / tps72201dbvr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tps72201dbvr.step / tps72201dbvr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (17 pp, sha256 906c116f714def9a, retrieved 2026-11-13, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).

Datasheet PDF