component
TPS71733DSER
Public Made by Adomby adom
Texas Instruments Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, WSON-6(1.5x1.5). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownTPS71733DSER
Texas Instruments · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · WSON-6(1.5x1.5)
TPS71733DSER from Texas Instruments, in a WSON-6(1.5x1.5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT | power_out | Regulated output voltage; a minimum of 1 µF capacitance from this pin to ground is required for stability, and output current is limited to 0 to 150 mA with COUT of 1 to 100 µF recommended. |
| 2 | GND | power_in | Ground reference pin; the datasheet recommends connecting the input and output capacitor ground returns as close to this pin as possible. |
| 3 | NR/FB | passive | Pin 3 is the noise reduction (NR) pin on the fixed-voltage TPS71733, where a noise reduction capacitor filters internal band-gap noise, with VNR limited to -0.3 V to 3.6 V; the FB feedback function applies only to the adjustable version. |
| 4 | EN | input | Enable input: driving it above VEN(high) turns the regulator on and driving it below VEN(low) puts it into standby, with VEN limited to -0.3 V to VIN + 0.3 V (or 7 V, whichever is greater) and the pin must not be left floating. |
| 5 | N/C | unconnected | Not connected internally; the datasheet states this pin can be tied to ground to improve thermal dissipation. |
| 6 | IN | power_in | Input supply to the device, operating from 2.5 V to 6.5 V with absolute maximum of 7 V, where a 0.1 µF to 1 µF capacitor is recommended for better performance. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | WSON-6(1.5x1.5) |
| Category | Power Management (PMIC) |
| Pins | 6 |
CAD (KiCad official)
- Symbol:
TPS71733DSER - Footprint:
Package_SON:WSON-6_1.5x1.5mm_P0.5mm - 3D model: WSON-6(1.5x1.5) (KiCad packages3D, STEP)
- 3D model files:
tps71733dser-etched.step/tps71733dser-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tps71733dser.step/tps71733dser.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (45 pp, sha256
9d6a9da698418596, retrieved 2026-10-08, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).