main
Ray
tps71733dckr: specified limits as data (metadata.characteristics, 30 rows from the datasheet)
382ea33
TPS71733DCKR
Texas Instruments · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SC-70-5
TPS71733DCKR from Texas Instruments, in a SC-70-5. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN | power_in | Input to the device; a 0.1-μF to 1-μF capacitor is recommended for IN better performance. |
| 2 | GND | power_in | Ground |
| 3 | EN | input | Driving the enable pin (EN) above VEN(high) turns on the regulator; driving this pin below VEN(low) puts the regulator into standby mode, thereby disabling the output and reducing operating current. |
| 4 | NR | passive | Fixed voltage versions only; the noise reduction capacitor filters the noise generated by the internal band gap, thus lowering output noise. |
| 5 | OUT | power_out | This pin is the regulated output voltage; a minimum capacitance of 1 μF is required for stability from this pin to ground. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SC-70-5 |
| Category | Power Management (PMIC) |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input voltage range | VIN | 2.5 | 6.5 | V | 4 | ||
| Output voltage range (TPS717xx fixed versions) | VOUT | 0.9 | 5 | V | TPS717xx fixed-voltage versions | 5 | |
| Output accuracy (nominal) | -2.5 | 2.5 | mV | Nominal TJ = 25°C | 5 | ||
| Output accuracy (VOUT ≥ 1.0 V) | -3 | 3 | % | Over VIN, IOUT, temperature; VOUT + 0.5 V ≤ VIN ≤ 6.5 V; 0 mA ≤ IOUT ≤ 150 mA; VOUT ≥ 1.0 V | 5 | ||
| Dropout voltage | VDO | 170 | 300 | mV | IOUT = 150 mA (VIN = VOUT(nom) – 0.1 V) | 5 | |
| Output current limit (fixed output) | ILIM (fixed) | 200 | 325 | 575 | mA | VOUT = 0.9 × VOUT(nom) | 5 |
| Ground pin current | IGND | 45 | 80 | μA | IOUT = 0.1 mA | 5 | |
| Shutdown current (IGND) | ISHDN | 0.2 | 1.5 | μA | VEN ≤ 0.4 V, 2.5 V ≤ VIN < 4.5 V | 5 | |
| Enable high (enabled), VIN ≤ 5.5 V | VEN(high) | 1.2 | 6.5 | V | VIN ≤ 5.5 V (max = VIN + 0.3 or 6.5 V, whichever is smaller) | 5 | |
| Enable high (enabled), 5.5 V < VIN ≤ 6.5 V | VEN(high) | 1.25 | 6.5 | V | 5.5 V < VIN ≤ 6.5 V | 5 | |
| Enable low (shutdown) | VEN(low) | 0 | 0.4 | V | 5 | ||
| Enable pin current, enabled | IEN(high) | 0.02 | 1 | μA | EN = 6.5 V | 5 | |
| Undervoltage lockout (rising) | UVLO | 2.41 | 2.45 | 2.49 | V | VIN rising | 5 |
| Input voltage (abs max) | VIN | -0.3 | 7 | V | All voltages with respect to GND | 4 | |
| Voltage VNR (NR pin) | VNR | -0.3 | 3.6 | V | All voltages with respect to GND | 4 | |
| Enable voltage (abs max) | VEN | -0.3 | V | Max = VIN + 0.3 V or 7 V, whichever is greater; all voltages with respect to GND | 4 | ||
| Output voltage (abs max) | VOUT | -0.3 | 7 | V | All voltages with respect to GND | 4 | |
| Operating junction temperature (abs max) | TJ | -55 | 150 | °C | Operating junction temperature range | 4 | |
| Storage temperature | Tstg | -55 | 150 | °C | 4 | ||
| Input voltage | VIN | 2.5 | 6.5 | V | Recommended operating | 4 | |
| Output voltage | VOUT | 0.9 | 5 | V | Recommended operating | 4 | |
| Output current | IOUT | 0 | 150 | mA | Recommended operating | 4 | |
| Enable voltage | VEN | 0 | V | Max = VIN | 4 | ||
| Output capacitor | COUT | 1 | 100 | µF | Recommended operating | 4 | |
| Junction temperature (operating) | TJ | -40 | 125 | °C | Recommended operating junction temperature range | 4 | |
| Junction-to-ambient thermal resistance (DCK) | RθJA | 279.2 | °C/W | DCK (5-pin SC70) package | 4 | ||
| Junction-to-case (top) thermal resistance (DCK) | RθJC(top) | 57.5 | °C/W | DCK (5-pin SC70) package | 4 | ||
| Junction-to-board thermal resistance (DCK) | RθJB | 74.1 | °C/W | DCK (5-pin SC70) package | 4 | ||
| Junction-to-top characterization parameter (DCK) | ψJT | 0.8 | °C/W | DCK (5-pin SC70) package | 4 | ||
| Junction-to-board characterization parameter (DCK) | ψJB | 73.1 | °C/W | DCK (5-pin SC70) package | 4 |
CAD (KiCad official)
- Symbol:
TPS71733DCKR - Footprint:
Package_TO_SOT_SMD:SOT-353_SC-70-5 - 3D model: SC-70-5 (KiCad packages3D, STEP)
- 3D model files:
tps71733dckr-etched.step/tps71733dckr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tps71733dckr.step/tps71733dckr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (45 pp, sha256
9d6a9da698418596, retrieved 2026-09-23, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# TPS71733DCKR
**Texas Instruments** · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SC-70-5
TPS71733DCKR from Texas Instruments, in a SC-70-5. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN | power_in | Input to the device; a 0.1-μF to 1-μF capacitor is recommended for IN better performance. |
| 2 | GND | power_in | Ground |
| 3 | EN | input | Driving the enable pin (EN) above VEN(high) turns on the regulator; driving this pin below VEN(low) puts the regulator into standby mode, thereby disabling the output and reducing operating current. |
| 4 | NR | passive | Fixed voltage versions only; the noise reduction capacitor filters the noise generated by the internal band gap, thus lowering output noise. |
| 5 | OUT | power_out | This pin is the regulated output voltage; a minimum capacitance of 1 μF is required for stability from this pin to ground. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SC-70-5 |
| Category | Power Management (PMIC) |
| Pins | 5 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input voltage range | VIN | 2.5 | | 6.5 | V | | 4 |
| Output voltage range (TPS717xx fixed versions) | VOUT | 0.9 | | 5 | V | TPS717xx fixed-voltage versions | 5 |
| Output accuracy (nominal) | | -2.5 | | 2.5 | mV | Nominal TJ = 25°C | 5 |
| Output accuracy (VOUT ≥ 1.0 V) | | -3 | | 3 | % | Over VIN, IOUT, temperature; VOUT + 0.5 V ≤ VIN ≤ 6.5 V; 0 mA ≤ IOUT ≤ 150 mA; VOUT ≥ 1.0 V | 5 |
| Dropout voltage | VDO | | 170 | 300 | mV | IOUT = 150 mA (VIN = VOUT(nom) – 0.1 V) | 5 |
| Output current limit (fixed output) | ILIM (fixed) | 200 | 325 | 575 | mA | VOUT = 0.9 × VOUT(nom) | 5 |
| Ground pin current | IGND | | 45 | 80 | μA | IOUT = 0.1 mA | 5 |
| Shutdown current (IGND) | ISHDN | | 0.2 | 1.5 | μA | VEN ≤ 0.4 V, 2.5 V ≤ VIN < 4.5 V | 5 |
| Enable high (enabled), VIN ≤ 5.5 V | VEN(high) | 1.2 | | 6.5 | V | VIN ≤ 5.5 V (max = VIN + 0.3 or 6.5 V, whichever is smaller) | 5 |
| Enable high (enabled), 5.5 V < VIN ≤ 6.5 V | VEN(high) | 1.25 | | 6.5 | V | 5.5 V < VIN ≤ 6.5 V | 5 |
| Enable low (shutdown) | VEN(low) | 0 | | 0.4 | V | | 5 |
| Enable pin current, enabled | IEN(high) | | 0.02 | 1 | μA | EN = 6.5 V | 5 |
| Undervoltage lockout (rising) | UVLO | 2.41 | 2.45 | 2.49 | V | VIN rising | 5 |
| Input voltage (abs max) | VIN | -0.3 | | 7 | V | All voltages with respect to GND | 4 |
| Voltage VNR (NR pin) | VNR | -0.3 | | 3.6 | V | All voltages with respect to GND | 4 |
| Enable voltage (abs max) | VEN | -0.3 | | | V | Max = VIN + 0.3 V or 7 V, whichever is greater; all voltages with respect to GND | 4 |
| Output voltage (abs max) | VOUT | -0.3 | | 7 | V | All voltages with respect to GND | 4 |
| Operating junction temperature (abs max) | TJ | -55 | | 150 | °C | Operating junction temperature range | 4 |
| Storage temperature | Tstg | -55 | | 150 | °C | | 4 |
| Input voltage | VIN | 2.5 | | 6.5 | V | Recommended operating | 4 |
| Output voltage | VOUT | 0.9 | | 5 | V | Recommended operating | 4 |
| Output current | IOUT | 0 | | 150 | mA | Recommended operating | 4 |
| Enable voltage | VEN | 0 | | | V | Max = VIN | 4 |
| Output capacitor | COUT | 1 | | 100 | µF | Recommended operating | 4 |
| Junction temperature (operating) | TJ | -40 | | 125 | °C | Recommended operating junction temperature range | 4 |
| Junction-to-ambient thermal resistance (DCK) | RθJA | | 279.2 | | °C/W | DCK (5-pin SC70) package | 4 |
| Junction-to-case (top) thermal resistance (DCK) | RθJC(top) | | 57.5 | | °C/W | DCK (5-pin SC70) package | 4 |
| Junction-to-board thermal resistance (DCK) | RθJB | | 74.1 | | °C/W | DCK (5-pin SC70) package | 4 |
| Junction-to-top characterization parameter (DCK) | ψJT | | 0.8 | | °C/W | DCK (5-pin SC70) package | 4 |
| Junction-to-board characterization parameter (DCK) | ψJB | | 73.1 | | °C/W | DCK (5-pin SC70) package | 4 |
## CAD (KiCad official)
- Symbol: `TPS71733DCKR`
- Footprint: `Package_TO_SOT_SMD:SOT-353_SC-70-5`
- 3D model: SC-70-5 (KiCad packages3D, STEP)
- 3D model files: `tps71733dckr-etched.step` / `tps71733dckr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tps71733dckr.step` / `tps71733dckr.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/tps717) (45 pp, sha256 `9d6a9da698418596`, retrieved 2026-09-23, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/tps71733dckr-datasheet.pdf)