component
TPS717285DCKR
Public Made by Adomby adom
Texas Instruments Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SC-70-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownTPS717285DCKR
Texas Instruments · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SC-70-5
TPS717285DCKR from Texas Instruments, in a SC-70-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN | power_in | Input to the device, with a 0.1-µF to 1-µF capacitor recommended for better performance; the input voltage range is 2.5 V to 6.5 V (absolute maximum 7 V). |
| 2 | GND | power_in | Ground pin; the datasheet recommends returning the input and output capacitor grounds as close to this pin as possible. |
| 3 | EN | input | Driving EN above VEN(high) turns on the regulator, and driving it below VEN(low) puts the regulator into standby, disabling the output and reducing operating current; EN must not be left floating and its voltage is limited to VIN + 0.3 V (or 7 V, whichever is greater). |
| 4 | NR/FB | passive | On this fixed-voltage version it is the noise reduction (NR) pin, where a noise reduction capacitor filters internal band-gap noise, with VNR limited to -0.3 V to 3.6 V; on adjustable versions it is the FB feedback input to the error amplifier, set by a resistor divider from OUT. |
| 5 | OUT | power_out | Regulated output voltage pin, which requires a minimum of 1 µF capacitance from this pin to ground for stability (recommended COUT range 1 µF to 100 µF). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SC-70-5 |
| Category | Power Management (PMIC) |
| Pins | 5 |
CAD (KiCad official)
- Symbol:
TPS717285DCKR - Footprint:
Package_TO_SOT_SMD:SOT-353_SC-70-5 - 3D model: SC-70-5 (KiCad packages3D, STEP)
- 3D model files:
tps717285dckr-etched.step/tps717285dckr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tps717285dckr.step/tps717285dckr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (45 pp, sha256
9d6a9da698418596, retrieved 2026-10-08, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).