main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs tps71701dckr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers tps71701dckr: viewers · Ray
package.json tps71701dckr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
page.json tps71701dckr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
README.md Initial commit: component/tps71701dckr · Ray
tps71701dckr-etched.fit.json tps71701dckr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
tps71701dckr-etched.glb tps71701dckr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
tps71701dckr-etched.step tps71701dckr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
tps71701dckr.glb Publish 0.1.0 · Ray
tps71701dckr.kicad_mod Publish 0.1.0 · Ray
tps71701dckr.kicad_sym Publish 0.1.0 · Ray
tps71701dckr.lbr Publish 0.1.0 · Ray
tps71701dckr.step Publish 0.1.0 · Ray

TPS71701DCKR

Texas Instruments · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SC-70-5

TPS71701DCKR from Texas Instruments, in a SC-70-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 IN input Input voltage pin rated 2.5V to 6.5V; 0.1-μF to 1-μF input capacitor recommended for better source impedance and transient performance.
2 GND power_in Ground reference pin; all ground return connections must be placed near this pin for optimal layout performance.
3 EN input Enable input pin; VEN ≥ 1.2V enables regulator output while VEN ≤ 0.4V disables output and reduces operating current to shutdown level.
4 FB input Feedback input pin for adjustable voltage version only; voltage at this pin is compared against 0.8V internal reference and fed to error amplifier; resistor divider from OUT to FB to GND sets output voltage 0.9V to 6.5V minus dropout.
5 OUT output Regulated output voltage pin supplying 0 to 150mA with typical dropout voltage of 170mV; minimum 1μF ceramic capacitance required for stability from this pin to ground.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SC-70-5
Category Power Management (PMIC)
Pins 5

CAD (KiCad official)

  • Symbol: TPS71701DCKR
  • Footprint: Package_TO_SOT_SMD:SOT-353_SC-70-5
  • 3D model: SC-70-5 (KiCad packages3D, STEP)
  • 3D model files: tps71701dckr-etched.step / tps71701dckr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tps71701dckr.step / tps71701dckr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (45 pp, sha256 9d6a9da698418596, retrieved 2026-09-24, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF