Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

TPS715A01DRBR

Texas Instruments · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · VSON-8-EP(3x3)

TPS715A01DRBR from Texas Instruments, in a VSON-8-EP(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 IN input Input supply pin operating from 2.5 V to 24 V; requires 0.1 µF bypass capacitor to ground.
2 NC unconnected No internal connection; may be connected to ground for thermal performance or left floating.
3 NC unconnected No internal connection; may be connected to ground for thermal performance or left floating.
4 GND power_in Ground connection and reference for the regulator circuit.
5 FB input Feedback pin for setting output voltage in adjustable mode using external resistor divider (VOUT = 1.205 V to 15 V).
6 NC unconnected No internal connection; may be connected to ground for thermal performance or left floating.
7 NC unconnected No internal connection; may be connected to ground for thermal performance or left floating.
8 OUT output Regulated output voltage pin; requires 1 µF capacitor minimum to ground for new chip stability.
9 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package VSON-8-EP(3x3)
Category Power Management (PMIC)
Pins 9

CAD (KiCad official)

  • Symbol: TPS715A01DRBR
  • Footprint: Package_SON:VSON-8-1EP_3x3mm_P0.65mm_EP1.6x2.4mm
  • 3D model: VSON-8-EP(3x3), generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 0.9 mm nominal VQFN height). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions are nominal, not the manufacturer's CAD (STEP)
  • 3D model files: tps715a01drbr-etched.step / tps715a01drbr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tps715a01drbr.step / tps715a01drbr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (40 pp, sha256 9fa2f3e352436ff9, retrieved 2026-10-01, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF