component
TPS70751PWPR
Public Made by Adomby adom
Texas Instruments Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, HTSSOP-20-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303
{
"schema_version": 1,
"type": "component",
"slug": "tps70751pwpr",
"title": "TPS70751PWPR",
"brief": "Texas Instruments Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, HTSSOP-20-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
"version": "0.1.0",
"license": "CC-BY-SA-4.0",
"tags": [
"component",
"power management (pmic)",
"tps70751pwpr",
"factory-2.0.0",
"extractor-text"
],
"component": {
"mpn": "TPS70751PWPR",
"manufacturer": "Texas Instruments",
"package": "HTSSOP-20-EP",
"pin_count": 21,
"category": "Power Management (PMIC)",
"subcategory": "Voltage Regulators - Linear, Low Drop Out (LDO) Regulators",
"datasheet": "https://www.ti.com/cn/lit/gpn/tps707",
"parts": {
"symbol": "tps70751pwpr.kicad_sym",
"footprint": "tps70751pwpr.kicad_mod",
"model_3d": "tps70751pwpr-hero.glb",
"model_3d_plain": "tps70751pwpr.glb",
"model_3d_step": "tps70751pwpr-etched.step",
"model_3d_step_plain": "tps70751pwpr.step",
"lbr": "tps70751pwpr.lbr"
},
"distributor_links": {
"lcsc": "C2862846",
"digikey": "TPS70751PWPR-ND",
"mouser": "595-TPS70751PWPR"
},
"distributor_check": {
"checked_at": "2026-10-08T20:15:59Z",
"source": "Component Ocean /api/assign-pns",
"digikey": {
"pn": "TPS70751PWPR-ND",
"status": "found",
"lifecycle": "Active"
},
"mouser": {
"pn": "595-TPS70751PWPR",
"status": "found"
}
},
"pins": [
{
"number": "1",
"name": "NC",
"type": "unconnected",
"description": "No connection; the pin is not internally connected and may be left unconnected."
},
{
"number": "2",
"name": "VIN1",
"type": "power_in",
"description": "Input voltage of regulator 1 (up to 250 mA); internal bias for both regulators is powered from VIN1, and the regulators stay off until VIN1 reaches 2.5 V (UVLO)."
},
{
"number": "3",
"name": "VIN1",
"type": "power_in",
"description": "Input voltage of regulator 1 (up to 250 mA); internal bias for both regulators is powered from VIN1, and the regulators stay off until VIN1 reaches 2.5 V (UVLO)."
},
{
"number": "4",
"name": "MR1",
"type": "input",
"description": "Manual reset input 1, active low, with an internal 6-µA pull-up to VIN1; pulling it low triggers a POR/RESET, and the absolute maximum voltage is VIN1."
},
{
"number": "5",
"name": "MR2",
"type": "input",
"description": "Manual reset input 2, active low, with an internal 6-µA pull-up to VIN1; pulling it low triggers a POR/RESET, and the absolute maximum voltage is VIN1."
},
{
"number": "6",
"name": "EN",
"type": "input",
"description": "Active-low enable; driving EN high shuts down both regulators (input current about 1 µA at TJ = +25°C), and driving it low enables the device. Absolute maximum voltage is 7 V."
},
{
"number": "7",
"name": "SEQ",
"type": "input",
"description": "Power-up sequence select: high or open sets VOUT2 to power up first (VOUT1 starts when VOUT2 reaches about 83%), low sets VOUT1 to power up first; internal 6-µA pull-up to VIN1 and absolute maximum voltage is VIN1."
},
{
"number": "8",
"name": "GND",
"type": "power_in",
"description": "Ground reference for the device, tied to network ground."
},
{
"number": "9",
"name": "VIN2",
"type": "power_in",
"description": "Input voltage of regulator 2 (up to 125 mA output); absolute maximum input voltage is 7 V."
},
{
"number": "10",
"name": "VIN2",
"type": "power_in",
"description": "Input voltage of regulator 2 (up to 125 mA output); absolute maximum input voltage is 7 V."
},
{
"number": "11",
"name": "NC",
"type": "unconnected",
"description": "No connection; the pin is not internally connected and may be left unconnected."
},
{
"number": "12",
"name": "VOUT2",
"type": "power_out",
"description": "Output of regulator 2 (up to 125 mA); the output is discharged internally when the regulator is disabled."
},
{
"number": "13",
"name": "VOUT2",
"type": "power_out",
"description": "Output of regulator 2 (up to 125 mA); the output is discharged internally when the regulator is disabled."
},
{
"number": "14",
"name": "VSENSE2/FB2",
"type": "input",
"description": "Regulator 2 output voltage sense on fixed-voltage versions (connect to VOUT as close as possible) or feedback input on the adjustable version (connect to the external divider); keep the connection short and avoid RC filtering."
},
{
"number": "15",
"name": "RESET",
"type": "output",
"description": "Open-drain, active-low SVS/power-on reset output reflecting VOUT2 and MR1/MR2 status; it requires a pull-up resistor and may be left floating if unused."
},
{
"number": "16",
"name": "PG1",
"type": "output",
"description": "Open-drain power-good output for regulator 1, low when VOUT1 is below 95% of its regulated voltage; it requires a pull-up resistor."
},
{
"number": "17",
"name": "VSENSE1/FB1",
"type": "input",
"description": "Regulator 1 output voltage sense on fixed-voltage versions (connect to VOUT as close as possible) or feedback input on the adjustable version (connect to the external divider); keep the connection short and avoid RC filtering."
},
{
"number": "18",
"name": "VOUT1",
"type": "power_out",
"description": "Output of regulator 1 (up to 250 mA); the output is discharged internally when the regulator is disabled."
},
{
"number": "19",
"name": "VOUT1",
"type": "power_out",
"description": "Output of regulator 1 (up to 250 mA); the output is discharged internally when the regulator is disabled."
},
{
"number": "20",
"name": "NC",
"type": "unconnected",
"description": "No connection; the pin is not internally connected and may be left unconnected."
},
{
"number": "21",
"name": "EP",
"type": "passive",
"description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
}
],
"provenance": {
"extractor": "extract_pins 0.3",
"factory_chain": {
"factory": "2.0.0",
"extractor": "extract_pins 0.3",
"primary_model": "claude-haiku-5-5",
"primary_mode": "text",
"consensus_model": "claude-sonnet-5-5",
"consensus": "agreed",
"guards": "pin_guards 0.1: passed",
"guard_notes": [
"extractor flagged: Package count conflict: the ordering table (page 3) labels the orderable parts HTSSOP-24 (PWP), but ; The PowerPAD exposed thermal pad is mentioned in the package name but is not given a pin number in t; Pin numbers were taken from Table 1 (Terminal Functions, page 10) because the text rendering of the ",
"exposed pad 21 added from the footprint"
],
"pages_sent": 11,
"cost_usd": 0.0805,
"at": "2026-10-08T20:14:44"
},
"datasheet": {
"url": "https://www.ti.com/cn/lit/gpn/tps707",
"pages": 45,
"sha256": "47c201c539729fd2",
"source_tier": "lcsc"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 21,
"described": 21,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "tps70751pwpr.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
6.41,
6.5,
1.2
],
"zmin_mm": 0,
"centre_offset_mm": 0,
"footprint_binding": "identity",
"sha256": "f11cdc2b8a460487f39135da82dc0cf35e461fc7ecc294d744f02002a22be718",
"checked": "2026-10-08",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "tps70751pwpr-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
6.41,
6.5,
1.2
],
"zmin_mm": 0,
"centre_offset_mm": 0,
"footprint_binding": "identity",
"sha256": "884152d892a03b29d2053efa5530bf34f65c18f23e66bd6092d5b00054407904",
"checked": "2026-10-08",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
]
},
"metadata": {
"specs": {
"Manufacturer": "Texas Instruments",
"Package": "HTSSOP-20-EP",
"Category": "Power Management (PMIC)",
"Pins": "21"
}
},
"variants": [],
"sections": [
"hero",
"viewers",
"readme",
"breadcrumbs",
"info"
],
"discovery_triggers": [
"tps70751pwpr"
],
"discovery_pitch": "TPS70751PWPR (Texas Instruments) component page: datasheet pinout, KiCad symbol, footprint and 3D.",
"author": {
"name": "Ray",
"email": "[email protected]"
},
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"tps70751pwpr.kicad_sym",
"tps70751pwpr.kicad_mod",
"tps70751pwpr.glb",
"tps70751pwpr.step",
"tps70751pwpr.lbr",
"docs/hero.png",
"docs/tps70751pwpr-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"tps70751pwpr-hero.glb",
"tps70751pwpr-hero.overlay.json"
],
"visibility": {
"public": true
}
}