component
TPS70151PWPR
Public Made by Adomby adom
Texas Instruments Linear Voltage Regulators (LDO), HTSSOP-20-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownTPS70151PWPR
Texas Instruments · Linear Voltage Regulators (LDO) · HTSSOP-20-EP
TPS70151PWPR from Texas Instruments, in a HTSSOP-20-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | No connection |
| 2 | VIN1 | power_in | Input voltage for regulator 1; internal bias voltages powered from VIN1 |
| 3 | VIN1 | power_in | Input voltage for regulator 1; internal bias voltages powered from VIN1 |
| 4 | MR1 | input | Manual reset input 1, active low, internally pulled up with 6mA current source to VIN1 |
| 5 | MR2 | input | Manual reset input 2, active low, internally pulled up with 6mA current source to VIN1 |
| 6 | EN | input | Active low enable input; high voltage shuts down the device, low voltage enables the device |
| 7 | SEQ | input | Power-up sequence control input with internal 6mA pull-up to VIN1; SEQ high or open causes VOUT2 to power up first, SEQ low causes VOUT1 to power up first |
| 8 | GND | power_in | Ground |
| 9 | VIN2 | power_in | Input voltage for regulator 2 |
| 10 | VIN2 | power_in | Input voltage for regulator 2 |
| 11 | NC | unconnected | No connection |
| 12 | VOUT2 | power_out | Output voltage of regulator 2 |
| 13 | VOUT2 | power_out | Output voltage of regulator 2 |
| 14 | VSENSE2/FB2 | input | Regulator 2 output voltage sense input for fixed configurations or feedback input for adjustable configurations |
| 15 | RESET | output | Open drain SVS/power-on reset output, active low; goes to high impedance when VOUT2 reaches 95% of regulated voltage after 120ms delay |
| 16 | PG1 | output | Open drain power good output for regulator 1; goes to high impedance when VOUT1 reaches 95% of regulated voltage, otherwise pulled low |
| 17 | VSENSE1/FB1 | input | Regulator 1 output voltage sense input for fixed configurations or feedback input for adjustable configurations |
| 18 | VOUT1 | power_out | Output voltage of regulator 1 |
| 19 | VOUT1 | power_out | Output voltage of regulator 1 |
| 20 | NC | unconnected | No connection |
| 21 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | HTSSOP-20-EP |
| Category | Power Supply Chip |
| Pins | 21 |
CAD (KiCad official)
- Symbol:
TPS70151PWPR - Footprint:
Package_SO:TSSOP-20-1EP_4.4x6.5mm_P0.65mm_EP2.15x3.35mm - 3D model: HTSSOP-20-EP, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.2 mm nominal TSSOP height). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions are nominal, not the manufacturer's CAD (STEP)
- 3D model files:
tps70151pwpr-etched.step/tps70151pwpr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tps70151pwpr.step/tps70151pwpr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (44 pp, sha256
d80cbe16566ccbe6, retrieved 2026-10-06, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).