main
Ray
Publish 0.1.0
b958288
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333
{
"slug": "tps70102pwp",
"version": "0.1.0",
"type": "component",
"description": "Texas Instruments Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, HTSSOP-20-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
"tags": [
"component",
"power management (pmic)",
"tps70102pwp",
"factory-2.0.0",
"extractor-text"
],
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"tps70102pwp.kicad_sym",
"tps70102pwp.kicad_mod",
"tps70102pwp.glb",
"tps70102pwp.step",
"tps70102pwp.lbr",
"docs/hero.png",
"docs/tps70102pwp-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"tps70102pwp-hero.glb",
"tps70102pwp-hero.overlay.json",
"tps70102pwp-etched.glb"
],
"component": {
"mpn": "TPS70102PWP",
"manufacturer": "Texas Instruments",
"package": "HTSSOP-20-EP",
"pin_count": 21,
"category": "Power Management (PMIC)",
"subcategory": "Voltage Regulators - Linear, Low Drop Out (LDO) Regulators",
"datasheet": "https://www.ti.com/lit/ds/symlink/tps701.pdf",
"parts": {
"symbol": "tps70102pwp.kicad_sym",
"footprint": "tps70102pwp.kicad_mod",
"model_3d": "tps70102pwp-hero.glb",
"model_3d_plain": "tps70102pwp-etched.glb",
"model_3d_step": "tps70102pwp-etched.step",
"model_3d_step_plain": "tps70102pwp.step",
"lbr": "tps70102pwp.lbr"
},
"distributor_links": {
"lcsc": "C2868722",
"mouser": "595-TPS70102PWP"
},
"distributor_check": {
"checked_at": "2026-11-10T10:12:23Z",
"source": "Component Ocean /api/assign-pns",
"digikey": {
"pn": null,
"status": "deferred",
"error": "shared DigiKey quota guard: 880 calls left today"
},
"mouser": {
"pn": "595-TPS70102PWP",
"status": "found"
}
},
"pins": [
{
"number": "1",
"name": "NC",
"type": "unconnected",
"description": "No connection; the pin is not internally connected and is listed as NC in the terminal table."
},
{
"number": "2",
"name": "VIN1",
"type": "power_in",
"description": "Input voltage of regulator 1; recommended input range is 2.7 V to 6 V and the internal bias is powered from VIN1, with UVLO threshold of 2.4 V to 2.65 V."
},
{
"number": "3",
"name": "VIN1",
"type": "power_in",
"description": "Input voltage of regulator 1; recommended input range is 2.7 V to 6 V and the internal bias is powered from VIN1, with UVLO threshold of 2.4 V to 2.65 V."
},
{
"number": "4",
"name": "MR1",
"type": "input",
"description": "Manual reset input 1, active low, pulled up internally to VIN1 through a 6 mA source; logic low (≤0.7 V) triggers a RESET."
},
{
"number": "5",
"name": "MR2",
"type": "input",
"description": "Manual reset input 2, active low, pulled up internally to VIN1 through a 6 mA source; logic low (≤0.7 V) triggers a RESET."
},
{
"number": "6",
"name": "EN",
"type": "input",
"description": "Active-low enable: a high level (≥2 V) puts the device in shutdown, a low level (≤0.7 V) enables it, and the input current is limited to -1 mA to 1 mA."
},
{
"number": "7",
"name": "SEQ",
"type": "input",
"description": "Power-up sequence control: high or open sets VOUT2 to power up first and low sets VOUT1 first; it has a 6 mA internal pull-up to VIN1 and thresholds of 2 V (high) and 0.7 V (low)."
},
{
"number": "8",
"name": "GND",
"type": "power_in",
"description": "Ground reference for the device."
},
{
"number": "9",
"name": "VIN2",
"type": "power_in",
"description": "Input voltage of regulator 2; recommended input range is 2.7 V to 6 V."
},
{
"number": "10",
"name": "VIN2",
"type": "power_in",
"description": "Input voltage of regulator 2; recommended input range is 2.7 V to 6 V."
},
{
"number": "11",
"name": "NC",
"type": "unconnected",
"description": "No connection; the pin is not internally connected and is listed as NC in the terminal table."
},
{
"number": "12",
"name": "VOUT2",
"type": "power_out",
"description": "Output voltage of regulator 2, rated for up to 250 mA of output current."
},
{
"number": "13",
"name": "VOUT2",
"type": "power_out",
"description": "Output voltage of regulator 2, rated for up to 250 mA of output current."
},
{
"number": "14",
"name": "VSENSE2/FB2",
"type": "input",
"description": "Regulator 2 output voltage sense for the fixed-output option or feedback input for the adjustable option; keep the connection as short as possible to avoid noise pickup."
},
{
"number": "15",
"name": "RESET",
"type": "output",
"description": "Open-drain, active-low power-on reset (SVS) output indicating VOUT2 and MR1/MR2 status; it releases high-impedance after a 120 ms delay when VOUT2 exceeds 95% of its regulated voltage and requires a pull-up resistor."
},
{
"number": "16",
"name": "PG1",
"type": "output",
"description": "Open-drain power-good output that goes low when VOUT1 is below 95% of its nominal regulated voltage and goes high-impedance when VOUT1 reaches 95%; it requires a pull-up resistor."
},
{
"number": "17",
"name": "VSENSE1/FB1",
"type": "input",
"description": "Regulator 1 output voltage sense for the fixed-output option or feedback input for the adjustable option; keep the connection as short as possible to avoid noise pickup."
},
{
"number": "18",
"name": "VOUT1",
"type": "power_out",
"description": "Output voltage of regulator 1, rated for up to 500 mA of output current."
},
{
"number": "19",
"name": "VOUT1",
"type": "power_out",
"description": "Output voltage of regulator 1, rated for up to 500 mA of output current."
},
{
"number": "20",
"name": "NC",
"type": "unconnected",
"description": "No connection; the pin is not internally connected and is listed as NC in the terminal table."
},
{
"number": "21",
"name": "EP",
"type": "passive",
"description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
}
],
"provenance": {
"extractor": "extract_pins 0.3",
"factory_chain": {
"factory": "2.0.0",
"extractor": "extract_pins 0.3",
"primary_model": "claude-haiku-5-5",
"primary_mode": "text",
"consensus_model": "claude-sonnet-5-5",
"consensus": "agreed",
"guards": "pin_guards 0.1: passed",
"guard_notes": [
"extractor flagged: The terminal table gives a combined name; TPS70102 is the adjustable-output variant, so these pins f; The datasheet's terminal table and pin diagram list 20 leaded pins only. The exposed PowerPAD therma; The pinout is shared by the whole TPS701xx family; the pin assignments above come from the TPS70102P",
"exposed pad 21 added from the footprint"
],
"pages_sent": 44,
"cost_usd": 0.1754,
"at": "2026-11-10T10:12:04"
},
"datasheet": {
"url": "https://www.ti.com/lit/ds/symlink/tps701.pdf",
"pages": 44,
"sha256": "d80cbe16566ccbe6",
"source_tier": "mfr"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"model_3d_generated": {
"generator": "factory/gen_pkg3d.py",
"family": "TSSOP",
"height_mm": 1.2,
"height_basis": "datasheet A, max",
"standoff_mm": 0.1,
"standoff_basis": "family nominal (no datasheet A1 read)",
"lead_width_mm": 0.24,
"lead_width_basis": "default: 0.6 x pad width across the lead, at most 0.45 x pitch 0.65 mm; a tab 0.9 x its width (no datasheet b read)",
"lead_thickness_mm": 0.128,
"lead_thickness_basis": "default for pitch 0.65 mm, height 1.2 mm (no datasheet c read)"
},
"pins": {
"total": 21,
"described": 21,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "tps70102pwp.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
6.4,
6.5,
1.2
],
"zmin_mm": 0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "0e4bfe4197ff2c0b43fce2d903b8eea4bf795ac791df8adac46a41f4702d62f3",
"checked": "2026-11-10",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "tps70102pwp-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
6.4,
6.5,
1.2
],
"zmin_mm": 0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "2913a7fb9e50b181de313c713a39a0a41c9f8e7ff986736f4ceea09aa1eb931b",
"checked": "2026-11-10",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
],
"package_dims": {
"package_code": "PWP0020W",
"source_page": 41,
"D": {
"nom_mm": 6.5,
"range_mm": [
6.4,
6.6
]
},
"E1": {
"nom_mm": 4.4,
"range_mm": [
4.3,
4.5
]
},
"E": {
"nom_mm": 6.4,
"range_mm": [
6.2,
6.6
]
},
"e": {
"nom_mm": 0.65,
"range_mm": [
null,
null
]
},
"A": {
"nom_mm": 1.2,
"range_mm": [
null,
1.2
]
},
"source": "datasheet package drawing, every number found on its page (extract_pins --task dims)",
"model_check": {
"file": "tps70102pwp.step",
"verdict": "PASS",
"reasons": [
"height and body within the datasheet's package drawing"
],
"by": "factory/package_fit.py"
}
}
}
}