Generated by kicad-footprint-generator · KiCad file format 20260206
TPS65510RGTR
Texas Instruments · Battery Management ICs · VQFN-16-EP(3x3)
TPS65510RGTR from Texas Instruments, in a VQFN-16-EP(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VO_BT | output | Boost converter output, with voltage set by the ratio of external resistors; absolute maximum -0.3 V to 6 V. |
| 2 | SW | passive | Switching terminal of the boost converter, connected to the external inductor; absolute maximum -0.3 V to 7 V and 1.3 A switch current. |
| 3 | PGND | power_in | Power ground, connected to the ground plane. |
| 4 | AGND | power_in | Analog ground, connected to the ground plane. |
| 5 | V_CTRL | input | Enable input for the VO1R8 and VO1R2 LDOs, with low disabling and high enabling them (VIH 1.4 V min, VIL 0.4 V max). |
| 6 | PWMON | input | Boost modulation select, with low selecting PFM mode and high selecting PWM mode (VIH 1.4 V to 5.5 V, VIL 0.4 V max). |
| 7 | CS | output | Open-drain indicator that goes low when VO_BT or VBAT is below its threshold, with a recommended 100 kΩ pullup and 1 mA min sink current. |
| 8 | XRESET | output | Open-drain indicator that goes low when VOUT is below the 2.1 V typical detection threshold, with a recommended 100 kΩ pullup. |
| 9 | VO1R2 | output | 1.2-V LDO output set internally, with 100 µA output current and enabled by V_CTRL. |
| 10 | VO1R8 | output | 1.8-V LDO output set internally, with 100 µA output current and enabled by V_CTRL. |
| 11 | VOUT | output | 3.3-V output from the LDO or the backup battery as selected by the internal power switch, with 30 mA output current and 50 mA overcurrent threshold. |
| 12 | VRO | output | 3.3-V LDO output set internally, used to charge the backup battery, with 10 mA min and 30 mA output current and 50 mA overcurrent threshold. |
| 13 | VBK | power_in | Backup battery input, recommended 1.8 V to 5.5 V. |
| 14 | FBG | input | Boost output adjust pin that is high impedance when PWMON is low and near GND level when PWMON is high. |
| 15 | FB | input | Feedback voltage input from the boost converter output, with 1.25 V typical reference. |
| 16 | VBAT | power_in | Main battery supply input, recommended 2.65 V to 5.5 V. |
| 17 | EP | passive | Exposed thermal pad that must be soldered to the printed circuit board for thermal and mechanical performance. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VQFN-16-EP(3x3) |
| Category | Power Supply Chip |
| Pins | 17 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage VBAT | VBAT | 2.65 | 5.5 | V | 3 | ||
| Supply voltage VBK | VBK | 1.8 | 5.5 | V | 3 | ||
| High-level input voltage PWMON | VIH | 1.4 | 5.5 | V | PWMON | 3 | |
| High-level input voltage V_CTRL | VIH | 1.4 | V | V_CTRL; max printed as VOUT | 3 | ||
| Low-level input voltage PWMON | VIL | 0.4 | V | PWMON | 3 | ||
| Low-level input voltage V_CTRL | VIL | 0.4 | V | V_CTRL | 3 | ||
| Operating free-air temperature | TA | -35 | 85 | °C | 3 | ||
| Input voltage VBAT, VBK | -0.3 | 6 | V | VBAT, VBK | 3 | ||
| Input voltage SW | -0.3 | 7 | V | SW | 3 | ||
| Input voltage FB, FBG | -0.3 | 6 | V | FB, FBG | 3 | ||
| Input voltage PWMON, V_CTRL | -0.3 | 6 | V | PWMON, V_CTRL | 3 | ||
| Input voltage XRESET, CS | -0.3 | 6 | V | XRESET, CS | 3 | ||
| Output voltage VRO, VOUT, VO1R8, VO1R2 | -0.3 | 3.6 | V | 3 | |||
| Output voltage VO_BT | -0.3 | 6 | V | VO_BT | 3 | ||
| SW switch current | 1.3 | A | SW | 3 | |||
| Maximum junction temperature | TJ | 125 | °C | 3 | |||
| Storage temperature range | Tstg | -40 | 150 | °C | 3 | ||
| Consumption current at VO_BT (PFM) | ICC1 | 60 | 100 | µA | V(VO_BT): 3.6 V, VOUT: No load, V(PWMON): AGND (PFM mode) | 4 | |
| Consumption current at VO_BT (PWM) | ICC2 | 250 | 350 | µA | V(VO_BT): 5 V, VOUT: No load, V(PWMON): VOUT (PWM mode) | 4 | |
| Consumption current at VBK | ICC3 | 0.1 | 1 | µA | V(VO_BT): 3.6 V, V(VBK): 3 V, VOUT: No load | 4 | |
| Consumption current at VBK | ICC4 | 2.5 | 5 | µA | VO_BT: Open, V(VBK): 3 V, VOUT: No load, V(V_CTRL): VOUT | 4 | |
| Consumption current at VBK | ICC5 | 1.2 | 3 | µA | VO_BT: Open, V(VBK): 3 V, VOUT: No load, V(V_CTRL): AGND | 4 | |
| Consumption current at VBAT | ICC6 | 5 | 10 | µA | V(VBAT): 3.6 V, V(VO_BT): 3.5 V | 4 | |
| Sink current at CS | I(SINK_CS) | 1 | 1.5 | mA | V(CS): 0.5 V, CS pin: Low-Z | 4 | |
| Leakage current at CS | I(LEAK_CS) | 1 | µA | V(CS): 5.5 V, CS pin: Hi-Z | 4 | ||
| Sink current at XRESET | I(SINK_XRESET) | 1 | 1.5 | mA | V(XRESET): 0.5 V, XRESET pin: Low-Z | 4 | |
| Leak current at XRESET | I(LEAK_XRESET) | 1 | µA | V(XRESET): 5.5 V, XRESET pin: Hi-Z | 4 | ||
| Leak current at VBK | I(LEAK_VBK) | 1 | µA | V(VO_BT): 5.5 V, V(VBK): 0 V | 4 | ||
| UVLO/CS detection level at VBAT | V(UVLO_DET) | 2.5 | 2.7 | 2.9 | V | V(VBAT): from 0 V to 5.5 V | 4 |
| UVLO/CS hysteresis at VBAT | V(UVLO_HYS) | -250 | -200 | -150 | mV | V(VBAT): from 5.5 V to 0 V | 4 |
| CS detection level at VO_BT | V(CS_DET) | 3.071 | 3.15 | 3.229 | V | V(VO_BT): from 5 V to 0 V | 4 |
| CS hysteresis at VO_BT | V(CS_HYS) | 50 | 100 | 150 | mV | V(VO_BT): from 0 V to 5 V | 4 |
| XRESET detection level | V(XRESET_DET) | 2.048 | 2.1 | 2.153 | V | V(VOUT): from 3.3 V to 0 V | 4 |
| XRESET hysteresis | V(XRESET_HYS) | 50 | 100 | 150 | mV | V(VOUT): from 0 V to 3.3 V | 4 |
| Power path change threshold | V(SW1) | 2.94 | 3 | 3.06 | V | Monitoring at VO_BT | 4 |
| CS output disable level | V(SW2) | 3.072 | 3.135 | 3.198 | V | Monitoring at VOUT | 4 |
| Threshold of WAKE mode | V(WAKE_DET) | 2.38 | 2.5 | 2.63 | V | V(VO_BT): from 0 V to 3.6 V | 4 |
| WAKE mode hysteresis | V(WAKE_HYS) | -150 | -100 | -50 | mV | V(VO_BT): from 3.6 V to 0 V | 4 |
| On resistance between VBK and VOUT | R(ON_VBK) | 30 | 60 | Ω | VO_BT: Open, V(VBK): 3 V, I(VOUT): 2 mA | 4 | |
| Thermal shutdown detection temperature | TSD | 150 | °C | Specified by design | 4 | ||
| Reference voltage FB (PFM) | V(FB) | 1.213 | 1.25 | 1.288 | V | V(PWMON): AGND (PFM mode) | 5 |
| Reference voltage FB (PWM) | V(FB) | 1.225 | 1.25 | 1.275 | V | V(PWMON): VOUT (PWM mode) | 5 |
| Overvoltage protection threshold | 1.3 | 1.35 | 1.4 | V | Monitoring at FB | 5 | |
| Overcurrent protection threshold (PFM) | 0.48 | 0.6 | 0.72 | A | V(PWMON): AGND (PFM mode) | 5 | |
| Overcurrent protection threshold (PWM) | 0.8 | 1 | 1.2 | A | V(PWMON): VOUT (PWM mode) | 5 | |
| Internal OSC frequency | OSC | 675 | 750 | 825 | kHz | V(PWMON): VOUT (PWM mode) | 5 |
| P-ch FET ON resistance | R(ON_P) | 500 | 700 | mΩ | V(VO_BT): 5 V | 5 | |
| N-ch FET ON resistance | R(ON_N) | 200 | 250 | mΩ | V(VO_BT): 5 V | 5 | |
| FBG ON resistance | R(ON_FBG) | 1 | 1.5 | kΩ | V(PWMON): VOUT (PWM mode) | 5 | |
| Leakage current at FBG | I(LEAK_FBG) | 1 | µA | V(PWMON): AGND (PFM mode) | 5 | ||
| Output voltage of VOUT | V(VOUT) | 3.234 | 3.3 | 3.366 | V | V(VO_BT): 5 V, I(VOUT): 1 mA | 5 |
| Output current of VOUT | I(VOUT) | 30 | mA | V(VO_BT): 5 V, V(VOUT) ≥ 3.156 V | 5 | ||
| VOUT overcurrent protection threshold | 50 | mA | 5 | ||||
| Output voltage of VRO | V(VRO) | 3.234 | 3.3 | 3.366 | V | V(VO_BT): 5 V, I(VRO): 1 mA | 5 |
| Output current of VRO | I(VRO) | 10 | 30 | mA | V(VO_BT): 5 V, V(VRO) ≥ 3.156 V | 5 | |
| VRO overcurrent protection threshold | 50 | mA | 5 | ||||
| Output voltage of VO1R8 | V(VO1R8) | 1.71 | 1.8 | 1.89 | V | V(V_CTRL): VOUT, V(VO_BT): 5 V, I(VO1R8): 100 µA | 5 |
| Output current of VO1R8 | I(VO1R8) | 100 | µA | V(V_CTRL): VOUT | 5 | ||
| Output voltage of VO1R2 | V(VO1R2) | 1.1 | 1.2 | 1.3 | V | V(V_CTRL): VOUT, V(VO_BT): 5 V, I(VO1R2): 100 µA | 5 |
| Output current of VO1R2 | I(VO1R2) | 100 | µA | V(V_CTRL): VOUT | 5 | ||
| Detection delay at CS | TCS | 55 | µs | V(VO_BT): from 3.6 V to 2.0 V; specified by design | 5 | ||
| Detection delay at XRESET | TXRESET | 25 | µs | V(VOUT): from 1.5 V to 3.0 V; specified by design | 5 | ||
| Thermal resistance junction-to-ambient | RθJA | 47.4 | °C/W | QFN, soldered PowerPAD on 2S2P JEDEC board with thermal vias | 3 |
CAD (KiCad official)
- Symbol:
TPS65510RGTR - Footprint:
Package_DFN_QFN:QFN-16-1EP_3x3mm_P0.5mm_EP1.7x1.7mm - 3D model: VQFN-16-EP(3x3) (KiCad packages3D, STEP)
- 3D model files:
tps65510rgtr-etched.step/tps65510rgtr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tps65510rgtr.step/tps65510rgtr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (22 pp, sha256
cd5b735410356daf, retrieved 2026-10-27, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).