main
Ray tps651851rslr: etched from the flattened plain STEP (service-occt 1.6.0, from the plain STEP) 5f15a25
{
  "slug": "tps651851rslr",
  "version": "0.1.0",
  "type": "component",
  "description": "Texas Instruments Global Sourcing Parts, VQFN-48-EP(6x6). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "global sourcing parts",
    "tps651851rslr",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "tps651851rslr.kicad_sym",
    "tps651851rslr.kicad_mod",
    "tps651851rslr.glb",
    "tps651851rslr.step",
    "tps651851rslr.lbr",
    "docs/hero.png",
    "docs/tps651851rslr-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html"
  ],
  "component": {
    "mpn": "TPS651851RSLR",
    "manufacturer": "Texas Instruments",
    "package": "VQFN-48-EP(6x6)",
    "pin_count": 49,
    "category": "Global Sourcing Parts",
    "subcategory": "Global Sourcing Parts",
    "datasheet": "https://www.ti.com/cn/lit/gpn/tps65185",
    "parts": {
      "symbol": "tps651851rslr.kicad_sym",
      "footprint": "tps651851rslr.kicad_mod",
      "model_3d": "tps651851rslr-etched.glb",
      "model_3d_plain": "tps651851rslr.glb",
      "model_3d_step": "tps651851rslr-etched.step",
      "model_3d_step_plain": "tps651851rslr.step",
      "lbr": "tps651851rslr.lbr"
    },
    "distributor_links": {
      "lcsc": "C702311",
      "digikey": "296-49010-2-ND",
      "mouser": "595-TPS651851RSLR"
    },
    "distributor_check": {
      "checked_at": "2026-10-01T17:23:43Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "296-49010-2-ND",
        "status": "found",
        "lifecycle": "Active"
      },
      "mouser": {
        "pn": "595-TPS651851RSLR",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "VREF",
        "type": "power_in",
        "description": "Filter pin for 2.25-V internal reference voltage to ADC; connect a 4.7-µF capacitor from this pin to ground."
      },
      {
        "number": "2",
        "name": "INT",
        "type": "output",
        "description": "Open-drain interrupt pin (active low); pulled low when one or more INT1 or INT2 bits are set."
      },
      {
        "number": "3",
        "name": "VNEG",
        "type": "power_out",
        "description": "Negative supply output pin for panel source drivers at -15V nominal; connect a 4.7-µF capacitor from this pin to ground."
      },
      {
        "number": "4",
        "name": "VNEG_IN",
        "type": "power_in",
        "description": "Input pin for LDO2 (VNEG) from DCDC2 output in range 15.2-16.8V; connect a 4.7-µF capacitor from this pin to ground."
      },
      {
        "number": "5",
        "name": "WAKEUP",
        "type": "input",
        "description": "Wake-up pin (active high); pull this pin high to wake up from sleep mode and enable I2C interface."
      },
      {
        "number": "6",
        "name": "DGND",
        "type": "power_in",
        "description": "Digital ground reference point; connect to ground plane."
      },
      {
        "number": "7",
        "name": "INT_LDO",
        "type": "output",
        "description": "Filter pin for 2.7-V internal supply; connect a 4.7-µF capacitor from this pin to ground."
      },
      {
        "number": "8",
        "name": "AGND1",
        "type": "power_in",
        "description": "Analog ground for general analog circuitry and VCOM driver circuit reference."
      },
      {
        "number": "9",
        "name": "VNEG_DIS",
        "type": "output",
        "description": "Discharge pin for VNEG output rail; connect to VNEG to enable active discharge when rail is disabled."
      },
      {
        "number": "10",
        "name": "VIN",
        "type": "power_in",
        "description": "Input power supply to general circuitry in range 3-6V; connect a 10-µF capacitor from this pin to ground."
      },
      {
        "number": "11",
        "name": "N/C",
        "type": "unconnected",
        "description": "Not internally connected; leave floating."
      },
      {
        "number": "12",
        "name": "VCOM_CTRL",
        "type": "input",
        "description": "VCOM amplifier enable control pin; pull high to enable or tie to battery for automatic sequencing with power rails."
      },
      {
        "number": "13",
        "name": "N/C",
        "type": "unconnected",
        "description": "Not internally connected; leave floating."
      },
      {
        "number": "14",
        "name": "VCOM_DIS",
        "type": "input",
        "description": "Discharge pin for VCOM output; connect to ground to discharge VCOM when disabled or leave floating if not desired."
      },
      {
        "number": "15",
        "name": "VCOM",
        "type": "output",
        "description": "Filter pin for panel common-voltage driver output in range 0V to -5.11V with 10mV resolution; connect a 4.7-µF capacitor from this pin to ground."
      },
      {
        "number": "16",
        "name": "VCOM_PWR",
        "type": "power_in",
        "description": "Internal supply input pin to VCOM buffer; connect to DCDC2 output and add 4.7-µF capacitor from this pin to ground."
      },
      {
        "number": "17",
        "name": "SCL",
        "type": "input",
        "description": "I2C serial interface clock input; supports 100-400 kHz clock frequency with 0.4V input low threshold."
      },
      {
        "number": "18",
        "name": "SDA",
        "type": "bidirectional",
        "description": "I2C serial interface data input/output (open-drain); requires external pull-up resistor with output low threshold of 0.4V."
      },
      {
        "number": "19",
        "name": "VPOS_DIS",
        "type": "input",
        "description": "Discharge pin for VPOS output; connect resistor from VPOS_DIS to VPOS to discharge when rail disabled or leave floating if not desired."
      },
      {
        "number": "20",
        "name": "N/C",
        "type": "unconnected",
        "description": "Not internally connected; leave floating."
      },
      {
        "number": "21",
        "name": "PWRUP",
        "type": "input",
        "description": "Power-up pin (edge-sensitive); pull high to transition from STANDBY to ACTIVE mode and power up output rails."
      },
      {
        "number": "22",
        "name": "PBKG",
        "type": "passive",
        "description": "Die substrate connection; connect to VN pin (-16V) with short wide trace to improve heat dissipation."
      },
      {
        "number": "23",
        "name": "PWR_GOOD",
        "type": "output",
        "description": "Open-drain power-good output pin; pulled low when any of four power rails (CP1, CP2, LDO1, LDO2) are disabled or not in regulation."
      },
      {
        "number": "24",
        "name": "VIN_P",
        "type": "power_in",
        "description": "Input power supply to inverting buck-boost converter (DCDC2) in range 3-6V; connect a 10-µF capacitor from this pin to ground."
      },
      {
        "number": "25",
        "name": "VN_SW",
        "type": "output",
        "description": "Inverting buck-boost converter (DCDC2) switch output; connects to external inductor for -16V generation."
      },
      {
        "number": "26",
        "name": "VN",
        "type": "power_in",
        "description": "Feedback pin for inverting buck-boost converter (DCDC2) at -16V output and supply for VNEG LDO and VEE charge pump; connect 4.7-µF capacitor from this pin to ground."
      },
      {
        "number": "27",
        "name": "VEE_IN",
        "type": "power_in",
        "description": "Input supply pin for negative charge pump (CP2); connect output of VN buck-boost converter at -16V."
      },
      {
        "number": "28",
        "name": "VEE_DRV",
        "type": "output",
        "description": "Driver output pin for negative charge pump (CP2) generating -20V rail with 15mA output current capability for TPS651851."
      },
      {
        "number": "29",
        "name": "VEE_DIS",
        "type": "input",
        "description": "Discharge pin for VEE output rail; connect resistor from VEE_DIS to VEE to enable active discharge when disabled or leave floating if not desired."
      },
      {
        "number": "30",
        "name": "VEE_D",
        "type": "output",
        "description": "Base voltage output pin for negative charge pump (CP2); connect a 100-nF capacitor from this pin to ground."
      },
      {
        "number": "31",
        "name": "VEE_FB",
        "type": "input",
        "description": "Feedback pin for negative charge pump (CP2) with typical feedback voltage of -0.994V at -20V output."
      },
      {
        "number": "32",
        "name": "PGND2",
        "type": "power_in",
        "description": "Power ground for CP1 (VDDH) and CP2 (VEE) charge pumps; provides return path for pump currents."
      },
      {
        "number": "33",
        "name": "VDDH_FB",
        "type": "input",
        "description": "Feedback pin for positive charge pump (CP1) with typical feedback voltage of 0.998V at 22V output."
      },
      {
        "number": "34",
        "name": "VDDH_D",
        "type": "output",
        "description": "Base voltage output pin for positive charge pump (CP1); connect a 100-nF capacitor from this pin to ground."
      },
      {
        "number": "35",
        "name": "VDDH_DIS",
        "type": "input",
        "description": "Discharge pin for VDDH output rail; connect to VDDH to discharge when rail disabled or leave floating if not desired."
      },
      {
        "number": "36",
        "name": "VDDH_DRV",
        "type": "output",
        "description": "Driver output pin for positive charge pump (CP1) generating 22V rail with 15mA output current capability for TPS651851."
      },
      {
        "number": "37",
        "name": "VDDH_IN",
        "type": "power_in",
        "description": "Input supply pin for positive charge pump (CP1); connect output of VB boost converter at +16V."
      },
      {
        "number": "38",
        "name": "N/C",
        "type": "unconnected",
        "description": "Not internally connected; leave floating."
      },
      {
        "number": "39",
        "name": "N/C",
        "type": "unconnected",
        "description": "Not internally connected; leave floating."
      },
      {
        "number": "40",
        "name": "VB_SW",
        "type": "output",
        "description": "Boost converter (DCDC1) switch output; connects to external inductor for +16V generation."
      },
      {
        "number": "41",
        "name": "PGND1",
        "type": "power_in",
        "description": "Power ground for DCDC1 boost converter; provides return path for boost converter current."
      },
      {
        "number": "42",
        "name": "VB",
        "type": "power_in",
        "description": "Feedback pin for boost converter (DCDC1) at +16V output and supply for VPOS LDO and VDDH charge pump; connect 4.7-µF capacitor from this pin to ground."
      },
      {
        "number": "43",
        "name": "VPOS_IN",
        "type": "power_in",
        "description": "Input pin for LDO1 (VPOS) from DCDC1 output in range 15.2-16.8V; connect a 4.7-µF capacitor from this pin to ground."
      },
      {
        "number": "44",
        "name": "VPOS",
        "type": "power_out",
        "description": "Positive supply output pin for panel source drivers at +15V nominal; connect a 4.7-µF capacitor from this pin to ground."
      },
      {
        "number": "45",
        "name": "VIN3P3",
        "type": "power_in",
        "description": "Input pin to 3.3-V power switch in range 3-6V; connect to system 3.3V supply that requires gating to E-Ink panel."
      },
      {
        "number": "46",
        "name": "V3P3",
        "type": "power_out",
        "description": "Output pin of integrated 3.3-V power switch; provides gated 3.3V supply to E-Ink display panel with 10Ω on-resistance."
      },
      {
        "number": "47",
        "name": "TS",
        "type": "input",
        "description": "Thermistor input pin for panel temperature monitoring; connect 10-kΩ NTC thermistor and 43-kΩ linearization resistor between this pin and AGND2."
      },
      {
        "number": "48",
        "name": "AGND2",
        "type": "power_in",
        "description": "Reference ground point for external thermistor and linearization resistor; measures panel temperature from -10°C to 85°C."
      },
      {
        "number": "49",
        "name": "EP",
        "type": "passive",
        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.2",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.2",
        "primary_model": "claude-haiku-4-5-20251001",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Open-drain output pins (INT, PWR_GOOD) are classified as 'output' type per KiCad ERC standards, but ; Thermal pad connection: The datasheet indicates thermal pad is internally connected to PBKG pin and "
        ],
        "pages_sent": 66,
        "cost_usd": 0.4202,
        "at": "2026-10-01T17:23:15"
      },
      "datasheet": {
        "url": "https://www.ti.com/cn/lit/gpn/tps65185",
        "pages": 66,
        "sha256": "903effae4b79ef29",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 49,
        "described": 49,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "tps651851rslr.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.02,
          6.02,
          0.9
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "2180b96d7947370b904e55640ab102eea7a16b3e69336c1ea0086ed11d1bda91",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "tps651851rslr-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.02,
          6.02,
          0.9
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "5281846088bf5e3e28e176879294314e4c022bfe8c2bfe05eb0a641769152acb",
        "checked": "2026-10-17",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}