main
History Download
Ray Publish 0.1.0 a33a9ff

TPS65124RGTR

Texas Instruments · LCD Drivers · VQFN-16-EP(3x3)

TPS65124RGTR from Texas Instruments, in a VQFN-16-EP(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 EN input Enable pin of the multiple-output DC-DC converter that must be terminated and not left floating; a simultaneous logic-high on EN and RUN enables the converter and a logic-low shuts down the device.
2 RUN input Controls the external P-Channel MOSFET, must be terminated and not left floating, and forcing it to a logic-high level turns on the external MOSFET switch.
3 ENVGL input Enable pin for the negative output (VGL) on TPS65124, which must be terminated and not left floating.
4 ENVGH input Enable pin for the positive output (VGH) on TPS65124, which must be terminated and not left floating.
5 FBL input Feedback pin for the negative output voltage divider, which regulates to 0 V nominal; the feedback resistor divider connects between VGL and the main output.
6 FBM input Feedback pin for the main output voltage divider, which regulates to 1.213 V nominal.
7 AGND power_in Analog ground that must be connected to power ground (PGND) underneath the IC.
8 VMAIN input Main output, post-regulated to provide a low-ripple source drive voltage for the LCD display.
9 FBH input Feedback pin for the positive output voltage divider, which regulates to 1.213 V nominal.
10 VGH output Positive output, boosted up to 20 V for the LCD gate drive.
11 BOOT output Provides a bootstrapped supply for the rectifier MOSFET driver, enabling the MOSFET gate to be driven above the output voltage.
12 PGND power_in Power ground that must be connected to AGND underneath the IC.
13 SWP bidirectional Connects the inductor and is connected to the drain of the low-side MOSFET switch.
14 SWN bidirectional Connects the inductor and is connected to the source of the high-side MOSFET switch.
15 VIN power_in Input voltage pin of the device, specified for full-load operation from 2.7 V to 5.5 V.
16 GATE bidirectional Gate driver output to an external small P-Channel MOSFET, or an active high control input; pulling GATE above the 1.4 V logic-high level and RUN to logic-low disables the integrated active power-down sequencing.
17 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package VQFN-16-EP(3x3)
Category Nixie Tube Driver/LED Driver
Pins 17

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input voltage VIN -0.3 6 V 2
Voltage at SWP SWP -0.3 23 V 2
Voltage at VGH VGH -0.3 21 V 2
Voltage at VMAIN, LDOIN, LDOOUT, ENVGL, ENVGH VMAIN, LDOIN, LDOOUT, ENVGL, ENVGH -0.3 6 V 2
Voltage at BOOT BOOT -0.3 6.2 V 2
Operating temperature range -40 85 °C 2
Maximum operating junction temperature TJ(max) 135 °C 2
Storage temperature range -65 150 °C printed as 65°C to 150°C 2
Input voltage for full load operation VIN 2.7 5.5 V RL_MAIN≥330Ω at VMAIN=5V, RL_VGH≥12kΩ at VGH=12V, RL_VGL≥12kΩ at VGL=-12V, VLDOIN=GND, TA=-40°C to 85°C 3
Minimum input voltage for start-up VIN 2.5 V RL_MAIN≥660Ω at VMAIN=5V, RL_VGH≥24kΩ at VGH=12V, RL_VGL≥24kΩ at VGL=-12V, VLDOIN=GND, TA=-20°C to 85°C 3
Main output voltage range VMAIN 3 5.6 V 4
Maximum main output current IMAIN 25 mA VMAIN≤5.3 V 4
Maximum main output current IMAIN 7.5 mA VMAIN≥5.3 V 4
Feedback regulation voltage VFBM 1.203 1.213 1.223 V 2.7 V≤VIN≤5.5 V, 100 µA≤IMAIN≤25 mA, TA=-20°C to 50°C 4
Feedback regulation voltage VFBM 1.195 1.213 1.231 V 2.7 V≤VIN≤5.5 V, 0 mA≤IMAIN≤25 mA 4
VGH output voltage range VGH 20 V min VIN + 0.5 V 4
Maximum DC output current IGH 6 mA 4
Feedback regulation voltage VFBH 1.177 1.213 1.249 V 2.7 V≤VIN≤5.5 V, 0 mA≤IGH≤2 mA 4
VGL output voltage range VGL -18 -2.5 V 4
Feedback regulation voltage VFBL -0.036 0 0.036 V 2.7 V≤VIN≤5.5 V, 0 mA≤IGL≤2 mA 4
Input voltage range VLDOIN 2.5 5.8 V 5
Maximum output current ILDOOUT 20 mA 5
Total accuracy -3 3 % 2.5 V≤VLDOIN≤5.5 V, 0 mA≤ILDOOUT≤20 mA 5
Linear regulator quiescent current IQ_LDO 11 20 µA VLDOIN=VLDOOUT+0.4 V (min 2.5 V), TA=25°C 5
Linear regulator shutdown current ISD_LDO 0.2 1 µA GATE=VIN 5
Undervoltage lockout threshold VUVLO 2.15 2.3 V VIN falling 5
High level input voltage VIH 1.4 V EN, RUN, ENVGL, ENVGH 5
Low level input voltage VIL 0.4 V EN, RUN, ENVGL, ENVGH 5
Logic input leakage current ILKG 0.01 0.1 µA ENVGL, ENVGH = VIN or GND (TPS65124) 5
Output power on VGH PGH 35 mW VIN≥2.7 V, VLDOIN=ENVGH=ENVGL=GND 3
Output power on VGH PGH 15 mW VIN≥2.5 V, VLDOIN=ENVGH=ENVGL=GND 3
Output power on VGL PGL 35 mW VIN≥2.7 V, VLDOIN=ENVGH=ENVGL=GND 3
Output power on VGL PGL 15 mW VIN≥2.5 V, VLDOIN=ENVGH=ENVGL=GND 3
Total output power on VBOOT + VGH + VGL PTOT 60 mW VIN≥2.5 V 3
Total output power on VBOOT + VGH + VGL PTOT 120 mW VIN≥2.7 V 3
Total output power on VBOOT + VGH + VGL PTOT 150 mW VIN≥3 V 3
Total output power on VBOOT + VGH + VGL PTOT 250 mW VIN≥4.5 V 3
P-MOS1 current limit ILIM 150 200 mA 2.7 V≤VIN≤5.5 V 3
P-MOS1 switch on-resistance rDS(ON) 2.5 4.3 Ω VIN=VGS=3.6 V 3
P-MOS1 switch on-resistance rDS(ON) 3.8 6.9 Ω VIN=VGS=2.5 V 3
N-MOS1 switch on-resistance rDS(ON) 1.9 3.5 Ω VBOOT=VGS=3.7 V 3
N-MOS1 switch on-resistance rDS(ON) 1.4 2.3 Ω VBOOT=VGS=5 V 3
N-MOS2 + P-MOS2 forward voltage drop 400 600 mV VGS=VBOOT=5.5 V, VSWP=2 V, IBOOT=ID=50 mA 3
N-MOS3 + D1 forward voltage drop 900 1100 mV VGS=VBOOT=5.5 V, VSWP=2 V, IGH=ID=50 mA 3
Quiescent current into VIN IQ 140 170 µA IMAIN=IGH=IGL=0 mA, VGH=+15 V, VGL=-15 V, VMAIN=5 V, VFBH=VFBM=+1.5 V, VFBL=-0.2 V, VBOOT=5.25 V 3
Quiescent current into BOOT IQ 30 60 µA same as quiescent current into VIN 3
Quiescent current into VGH IQ 0.1 1 µA VLDOIN=GND, EN=RUN=VIN, TA=25°C 3
Shutdown current ISD 0.1 1 µA TA=25°C 3
Feedback input bias current IFBM 0.01 0.1 µA VFBM=VREF 4
Package thermal resistance junction to ambient RθJA 68 °C/W RGT package 2
Derating factor above TA = 25°C 15 mW/°C RGT package 2
Core converter efficiency η 83 % VMAIN=5.0 V, IBOOT=20 mA, VGH=15 V, VGL=-10 V, IGH=IGL=100 µA, VLDOIN=GND 3
Switching frequency f 4 MHz RL_MAIN=250 Ω at VMAIN=5 V, VLDOIN=ENVGH=ENVGL=GND 3
Minimum dropout voltage 130 mV IMAIN=10 mA 4
P-MOS1 start-up current limit ISTART-UP 65 mA 2.7 V≤VIN≤5.5 V 3
Load regulation 0.006 %/mA IMAIN=0 to 25 mA, VMAIN=5 V 4
Load regulation -0.11 %/mA IGH=0 to 2 mA, VGH=15 V 4
Line regulation 0.01 %/V VIN=2.7 V to 5.5 V, IGH=100 µA 4
Load regulation 0.13 %/mA IGL=0 to 2 mA, VGL=-15 V 4
Line regulation 0.1 %/V VIN=2.7 V to 5.5 V, IGL=100 µA 4
Load regulation 0.006 %/mA ILDOOUT=0 to 20 mA 5
Line regulation 0.013 %/V VLDOIN=VLDOOUT+0.5 V (min 2.5 V) to 5.5 V, ILDOOUT=20 mA 5
EN, RUN pin pull-down resistance 100 kΩ EN, RUN ≤0.4 V 5

CAD (KiCad official)

  • Symbol: TPS65124RGTR
  • Footprint: Package_DFN_QFN:QFN-16-1EP_3x3mm_P0.5mm_EP1.7x1.7mm
  • 3D model: VQFN-16-EP(3x3) (KiCad packages3D, STEP)
  • 3D model files: tps65124rgtr-etched.step / tps65124rgtr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tps65124rgtr.step / tps65124rgtr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (31 pp, sha256 12e8bf4eb7e171b4, retrieved 2026-11-02, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF