← Commit history

Initial commit: component/tps650250rhbr

Ray ·ad92ae9917 ·
2 files changed +364
README.mdadded+70
@@ -0,0 +1,70 @@+# TPS650250RHBR++**Texas Instruments** · Battery Management · VQFN-32-EP(5x5)++TPS650250RHBR from Texas Instruments, in a VQFN-32-EP(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | VDCDC3 | input | VDCDC3 feedback voltage sense input; connect directly to VDCDC3 output. |+| 2 | PGND3 | power_in | Power ground for VDCDC3 converter. |+| 3 | L3 | passive | Switch pin of VDCDC3 converter; VDCDC3 inductor connects here. |+| 4 | VINDCDC3 | power_in | Input voltage for VDCDC3 step-down converter (2.5V to 6V range); must be connected to same voltage supply as VINDCDC1, VINDCDC2, and VCC. |+| 5 | VINDCDC1 | power_in | Input voltage for VDCDC1 step-down converter (2.5V to 6V range); must be connected to same voltage supply as VINDCDC2, VINDCDC3, and VCC. |+| 6 | L1 | passive | Switch pin of VDCDC1 converter; VDCDC1 inductor connects here. |+| 7 | PGND1 | power_in | Power ground for VDCDC1 converter. |+| 8 | VDCDC1 | input | VDCDC1 feedback voltage sense input; connect directly to VDCDC1 output. |+| 9 | DEFDCDC1 | input | Input signal indicating default VDCDC1 voltage: 0 = 2.8V, 1 = 3.3V; can also connect to resistor divider between VDCDC1 and GND for output voltage range 0.6V to VINDCDC1. |+| 10 | FB_LDO2 | input | Feedback pin for LDO2. |+| 11 | FB_LDO1 | input | Feedback pin for LDO1. |+| 12 | Vdd_alive | output | Output voltage for Vdd_alive LDO (30 mA, 1.0V nominal). |+| 13 | AGND2 | power_in | Analog ground connection; all analog ground pins are connected internally on the chip. |+| 14 | VLDO2 | output | Output voltage of LDO2 (200 mA maximum, 1V to 3.3V range). |+| 15 | VINLDO | power_in | Input voltage for LDO1 and LDO2 (1.5V to 6.5V range). |+| 16 | VLDO1 | output | Output voltage of LDO1 (200 mA maximum, 1V to 3.3V range). |+| 17 | EN_LDO | input | Enable input for LDO1 and LDO2; logic high enables the LDOs, logic low disables the LDOs. |+| 18 | EN_DCDC3 | input | VDCDC3 enable pin; logic high enables the regulator, logic low disables the regulator. |+| 19 | EN_DCDC2 | input | VDCDC2 enable pin; logic high enables the regulator, logic low disables the regulator. |+| 20 | EN_DCDC1 | input | VDCDC1 enable pin; logic high enables the regulator, logic low disables the regulator. |+| 21 | PWRFAIL | output | Open-drain output, active low when PWRFAIL comparator indicates low VBAT condition. |+| 22 | DEFDCDC2 | input | Input signal indicating default VDCDC2 voltage: 0 = 1.8V, 1 = 2.5V; can also connect to resistor divider between VDCDC2 and GND for output voltage range 0.6V to VINDCDC2. |+| 23 | MODE | input | Select between Power Safe Mode (low level, PFM at light load) and forced PWM mode (high level) for DCDC1, DCDC2, and DCDC3. |+| 24 | EN_Vdd_alive | input | Enable input for Vdd_alive LDO; logic high enables the LDO, logic low disables the LDO. |+| 25 | VDCDC2 | input | VDCDC2 feedback voltage sense input; connect directly to VDCDC2 output. |+| 26 | PGND2 | power_in | Power ground for VDCDC2 converter. |+| 27 | L2 | passive | Switch pin of VDCDC2 converter; VDCDC2 inductor connects here. |+| 28 | VINDCDC2 | power_in | Input voltage for VDCDC2 step-down converter (2.5V to 6V range); must be connected to same voltage supply as VINDCDC1, VINDCDC3, and VCC. |+| 29 | Vcc | power_in | Power supply for digital and analog circuitry of DCDC1, DCDC2, and DCDC3 DC-DC converters; must be connected to same voltage supply as VINDCDC1, VINDCDC2, and VINDCDC3. |+| 30 | PWRFAIL_SNS | input | Input for the comparator driving the PWRFAIL output. |+| 31 | AGND1 | power_in | Analog ground connection; all analog ground pins are connected internally on the chip. |+| 32 | DEFDCDC3 | input | This pin must be connected to a resistor divider between VDCDC3 and GND; output voltage of DCDC3 converter can be set in range from 0.6V to VINDCDC3. |+| 33 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | VQFN-32-EP(5x5) |+| Category | Power Management (PMIC) |+| Pins | 33 |++## CAD (KiCad official)++- Symbol: `TPS650250RHBR`+- Footprint: `Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.3x3.3mm`+- 3D model: VQFN-32-EP(5x5) (KiCad packages3D, STEP)+- 3D model files: `tps650250rhbr-etched.step` / `tps650250rhbr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tps650250rhbr.step` / `tps650250rhbr.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/tps650250) (36 pp, sha256 `d0e751af73007df4`, retrieved 2026-09-23, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/tps650250rhbr-datasheet.pdf)
page.jsonadded+294
@@ -0,0 +1,294 @@+{+  "slug": "tps650250rhbr",+  "version": "0.1.0",+  "type": "component",+  "description": "Texas Instruments Battery Management, VQFN-32-EP(5x5). Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "power management (pmic)",+    "tps650250rhbr",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "tps650250rhbr.kicad_sym",+    "tps650250rhbr.kicad_mod",+    "tps650250rhbr.glb",+    "tps650250rhbr.step",+    "tps650250rhbr.lbr",+    "docs/hero.png",+    "docs/tps650250rhbr-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "TPS650250RHBR",+    "manufacturer": "Texas Instruments",+    "package": "VQFN-32-EP(5x5)",+    "pin_count": 33,+    "category": "Power Management (PMIC)",+    "subcategory": "Battery Management",+    "datasheet": "https://www.ti.com/cn/lit/gpn/tps650250",+    "parts": {+      "symbol": "tps650250rhbr.kicad_sym",+      "footprint": "tps650250rhbr.kicad_mod",+      "model_3d": "tps650250rhbr-etched.glb",+      "model_3d_plain": "tps650250rhbr.glb",+      "model_3d_step": "tps650250rhbr-etched.step",+      "model_3d_step_plain": "tps650250rhbr.step",+      "lbr": "tps650250rhbr.lbr"+    },+    "distributor_links": {+      "lcsc": "C117007"+    },+    "pins": [+      {+        "number": "1",+        "name": "VDCDC3",+        "type": "input",+        "description": "VDCDC3 feedback voltage sense input; connect directly to VDCDC3 output."+      },+      {+        "number": "2",+        "name": "PGND3",+        "type": "power_in",+        "description": "Power ground for VDCDC3 converter."+      },+      {+        "number": "3",+        "name": "L3",+        "type": "passive",+        "description": "Switch pin of VDCDC3 converter; VDCDC3 inductor connects here."+      },+      {+        "number": "4",+        "name": "VINDCDC3",+        "type": "power_in",+        "description": "Input voltage for VDCDC3 step-down converter (2.5V to 6V range); must be connected to same voltage supply as VINDCDC1, VINDCDC2, and VCC."+      },+      {+        "number": "5",+        "name": "VINDCDC1",+        "type": "power_in",+        "description": "Input voltage for VDCDC1 step-down converter (2.5V to 6V range); must be connected to same voltage supply as VINDCDC2, VINDCDC3, and VCC."+      },+      {+        "number": "6",+        "name": "L1",+        "type": "passive",+        "description": "Switch pin of VDCDC1 converter; VDCDC1 inductor connects here."+      },+      {+        "number": "7",+        "name": "PGND1",+        "type": "power_in",+        "description": "Power ground for VDCDC1 converter."+      },+      {+        "number": "8",+        "name": "VDCDC1",+        "type": "input",+        "description": "VDCDC1 feedback voltage sense input; connect directly to VDCDC1 output."+      },+      {+        "number": "9",+        "name": "DEFDCDC1",+        "type": "input",+        "description": "Input signal indicating default VDCDC1 voltage: 0 = 2.8V, 1 = 3.3V; can also connect to resistor divider between VDCDC1 and GND for output voltage range 0.6V to VINDCDC1."+      },+      {+        "number": "10",+        "name": "FB_LDO2",+        "type": "input",+        "description": "Feedback pin for LDO2."+      },+      {+        "number": "11",+        "name": "FB_LDO1",+        "type": "input",+        "description": "Feedback pin for LDO1."+      },+      {+        "number": "12",+        "name": "Vdd_alive",+        "type": "output",+        "description": "Output voltage for Vdd_alive LDO (30 mA, 1.0V nominal)."+      },+      {+        "number": "13",+        "name": "AGND2",+        "type": "power_in",+        "description": "Analog ground connection; all analog ground pins are connected internally on the chip."+      },+      {+        "number": "14",+        "name": "VLDO2",+        "type": "output",+        "description": "Output voltage of LDO2 (200 mA maximum, 1V to 3.3V range)."+      },+      {+        "number": "15",+        "name": "VINLDO",+        "type": "power_in",+        "description": "Input voltage for LDO1 and LDO2 (1.5V to 6.5V range)."+      },+      {+        "number": "16",+        "name": "VLDO1",+        "type": "output",+        "description": "Output voltage of LDO1 (200 mA maximum, 1V to 3.3V range)."+      },+      {+        "number": "17",+        "name": "EN_LDO",+        "type": "input",+        "description": "Enable input for LDO1 and LDO2; logic high enables the LDOs, logic low disables the LDOs."+      },+      {+        "number": "18",+        "name": "EN_DCDC3",+        "type": "input",+        "description": "VDCDC3 enable pin; logic high enables the regulator, logic low disables the regulator."+      },+      {+        "number": "19",+        "name": "EN_DCDC2",+        "type": "input",+        "description": "VDCDC2 enable pin; logic high enables the regulator, logic low disables the regulator."+      },+      {+        "number": "20",+        "name": "EN_DCDC1",+        "type": "input",+        "description": "VDCDC1 enable pin; logic high enables the regulator, logic low disables the regulator."+      },+      {+        "number": "21",+        "name": "PWRFAIL",+        "type": "output",+        "description": "Open-drain output, active low when PWRFAIL comparator indicates low VBAT condition."+      },+      {+        "number": "22",+        "name": "DEFDCDC2",+        "type": "input",+        "description": "Input signal indicating default VDCDC2 voltage: 0 = 1.8V, 1 = 2.5V; can also connect to resistor divider between VDCDC2 and GND for output voltage range 0.6V to VINDCDC2."+      },+      {+        "number": "23",+        "name": "MODE",+        "type": "input",+        "description": "Select between Power Safe Mode (low level, PFM at light load) and forced PWM mode (high level) for DCDC1, DCDC2, and DCDC3."+      },+      {+        "number": "24",+        "name": "EN_Vdd_alive",+        "type": "input",+        "description": "Enable input for Vdd_alive LDO; logic high enables the LDO, logic low disables the LDO."+      },+      {+        "number": "25",+        "name": "VDCDC2",+        "type": "input",+        "description": "VDCDC2 feedback voltage sense input; connect directly to VDCDC2 output."+      },+      {+        "number": "26",+        "name": "PGND2",+        "type": "power_in",+        "description": "Power ground for VDCDC2 converter."+      },+      {+        "number": "27",+        "name": "L2",+        "type": "passive",+        "description": "Switch pin of VDCDC2 converter; VDCDC2 inductor connects here."+      },+      {+        "number": "28",+        "name": "VINDCDC2",+        "type": "power_in",+        "description": "Input voltage for VDCDC2 step-down converter (2.5V to 6V range); must be connected to same voltage supply as VINDCDC1, VINDCDC3, and VCC."+      },+      {+        "number": "29",+        "name": "Vcc",+        "type": "power_in",+        "description": "Power supply for digital and analog circuitry of DCDC1, DCDC2, and DCDC3 DC-DC converters; must be connected to same voltage supply as VINDCDC1, VINDCDC2, and VINDCDC3."+      },+      {+        "number": "30",+        "name": "PWRFAIL_SNS",+        "type": "input",+        "description": "Input for the comparator driving the PWRFAIL output."+      },+      {+        "number": "31",+        "name": "AGND1",+        "type": "power_in",+        "description": "Analog ground connection; all analog ground pins are connected internally on the chip."+      },+      {+        "number": "32",+        "name": "DEFDCDC3",+        "type": "input",+        "description": "This pin must be connected to a resistor divider between VDCDC3 and GND; output voltage of DCDC3 converter can be set in range from 0.6V to VINDCDC3."+      },+      {+        "number": "33",+        "name": "EP",+        "type": "passive",+        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-5",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [+          "extractor flagged: Thermal pad is documented in Pin Functions table on page 3 as 'Thermal pad — — Connect the power pad",+          "exposed pad 33 added from the footprint"+        ],+        "pages_sent": 36,+        "cost_usd": 0.4339,+        "at": "2026-09-23T15:02:55"+      },+      "datasheet": {+        "url": "https://www.ti.com/cn/lit/gpn/tps650250",+        "pages": 36,+        "sha256": "d0e751af73007df4",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 33,+        "described": 33,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file