← Commit history
page.json+17−14@@ -56,7 +56,7 @@ "number": "4", "name": "L3", "type": "passive",- "description": "Switch node connection point for VDCDC3 buck converter inductor with 1 M\u03a9 internal resistance to GND."+ "description": "Switch node connection point for VDCDC3 buck converter inductor with 1 MΩ internal resistance to GND." }, { "number": "5",@@ -74,7 +74,7 @@ "number": "7", "name": "L1", "type": "passive",- "description": "Switch node connection point for VDCDC1 buck converter inductor with 1 M\u03a9 internal resistance to GND."+ "description": "Switch node connection point for VDCDC1 buck converter inductor with 1 MΩ internal resistance to GND." }, { "number": "8",@@ -158,7 +158,7 @@ "number": "21", "name": "LOWBAT", "type": "tri_state",- "description": "Open-drain output from low-battery comparator; active low when LOWBAT_SNS is below 1 V threshold (\u00b11%) with 40-60 mV hysteresis."+ "description": "Open-drain output from low-battery comparator; active low when LOWBAT_SNS is below 1 V threshold (±1%) with 40-60 mV hysteresis." }, { "number": "22",@@ -170,25 +170,25 @@ "number": "23", "name": "DCDC3_EN", "type": "input",- "description": "Enable input for VDCDC3 converter; logic high (1.3 \u00d7 VCC minimum) enables regulator, logic low (0-0.4 V) disables it."+ "description": "Enable input for VDCDC3 converter; logic high (1.3 × VCC minimum) enables regulator, logic low (0-0.4 V) disables it." }, { "number": "24", "name": "DCDC2_EN", "type": "input",- "description": "Enable input for VDCDC2 converter; logic high (1.3 \u00d7 VCC minimum) enables regulator, logic low (0-0.4 V) disables it."+ "description": "Enable input for VDCDC2 converter; logic high (1.3 × VCC minimum) enables regulator, logic low (0-0.4 V) disables it." }, { "number": "25", "name": "DCDC1_EN", "type": "input",- "description": "Enable input for VDCDC1 converter; logic high (1.3 \u00d7 VCC minimum) enables regulator, logic low (0-0.4 V) disables it."+ "description": "Enable input for VDCDC1 converter; logic high (1.3 × VCC minimum) enables regulator, logic low (0-0.4 V) disables it." }, { "number": "26", "name": "TRESPWRON", "type": "input",- "description": "Timing capacitor input for RESPWRON pulse generation; charges/discharges between 0.25 V and 1 V thresholds at 2 \u03bcA for 128 cycles (1 nF = 100 ms)."+ "description": "Timing capacitor input for RESPWRON pulse generation; charges/discharges between 0.25 V and 1 V thresholds at 2 μA for 128 cycles (1 nF = 100 ms)." }, { "number": "27",@@ -206,19 +206,19 @@ "number": "29", "name": "SDAT", "type": "bidirectional",- "description": "I2C-compatible serial interface data and address line; open-drain with 4.7 k\u03a9 external pullup to VRTC; supports fast mode up to 400 kHz."+ "description": "I2C-compatible serial interface data and address line; open-drain with 4.7 kΩ external pullup to VRTC; supports fast mode up to 400 kHz." }, { "number": "30", "name": "SCLK", "type": "input",- "description": "I2C-compatible serial interface clock input; open-drain with 4.7 k\u03a9 external pullup to VRTC; supports fast mode up to 400 kHz."+ "description": "I2C-compatible serial interface clock input; open-drain with 4.7 kΩ external pullup to VRTC; supports fast mode up to 400 kHz." }, { "number": "31", "name": "PWRFAIL", "type": "tri_state",- "description": "Open-drain power-fail output; active low when PWRFAIL_SNS is below 1 V threshold (\u00b11%) with 40-60 mV hysteresis."+ "description": "Open-drain power-fail output; active low when PWRFAIL_SNS is below 1 V threshold (±1%) with 40-60 mV hysteresis." }, { "number": "32",@@ -242,7 +242,7 @@ "number": "35", "name": "L2", "type": "passive",- "description": "Switch node connection point for VDCDC2 buck converter inductor with 1 M\u03a9 internal resistance to GND."+ "description": "Switch node connection point for VDCDC2 buck converter inductor with 1 MΩ internal resistance to GND." }, { "number": "36",@@ -260,13 +260,13 @@ "number": "38", "name": "PWRFAIL_SNS", "type": "input",- "description": "Analog input to power-fail comparator with 1 V threshold (\u00b11%) and 40-60 mV hysteresis; drives PWRFAIL open-drain output."+ "description": "Analog input to power-fail comparator with 1 V threshold (±1%) and 40-60 mV hysteresis; drives PWRFAIL open-drain output." }, { "number": "39", "name": "LOWBAT_SNS", "type": "input",- "description": "Analog input to low-battery comparator with 1 V threshold (\u00b11%) and 40-60 mV hysteresis; drives LOWBAT open-drain output."+ "description": "Analog input to low-battery comparator with 1 V threshold (±1%) and 40-60 mV hysteresis; drives LOWBAT open-drain output." }, { "number": "40",@@ -359,5 +359,8 @@ "docs/tps65023rsbr-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }