← Commit history

tps65023rsbr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding)

Ray ·e9ddc3dfec · ·parent 1deb0bc
2 files changed +97−17
package.json+55−15
@@ -71,7 +71,7 @@         "number": "4",         "name": "L3",         "type": "passive",-        "description": "Switch node connection point for VDCDC3 buck converter inductor with 1 M\u03a9 internal resistance to GND."+        "description": "Switch node connection point for VDCDC3 buck converter inductor with 1 MΩ internal resistance to GND."       },       {         "number": "5",@@ -89,7 +89,7 @@         "number": "7",         "name": "L1",         "type": "passive",-        "description": "Switch node connection point for VDCDC1 buck converter inductor with 1 M\u03a9 internal resistance to GND."+        "description": "Switch node connection point for VDCDC1 buck converter inductor with 1 MΩ internal resistance to GND."       },       {         "number": "8",@@ -173,7 +173,7 @@         "number": "21",         "name": "LOWBAT",         "type": "tri_state",-        "description": "Open-drain output from low-battery comparator; active low when LOWBAT_SNS is below 1 V threshold (\u00b11%) with 40-60 mV hysteresis."+        "description": "Open-drain output from low-battery comparator; active low when LOWBAT_SNS is below 1 V threshold (±1%) with 40-60 mV hysteresis."       },       {         "number": "22",@@ -185,25 +185,25 @@         "number": "23",         "name": "DCDC3_EN",         "type": "input",-        "description": "Enable input for VDCDC3 converter; logic high (1.3 \u00d7 VCC minimum) enables regulator, logic low (0-0.4 V) disables it."+        "description": "Enable input for VDCDC3 converter; logic high (1.3 × VCC minimum) enables regulator, logic low (0-0.4 V) disables it."       },       {         "number": "24",         "name": "DCDC2_EN",         "type": "input",-        "description": "Enable input for VDCDC2 converter; logic high (1.3 \u00d7 VCC minimum) enables regulator, logic low (0-0.4 V) disables it."+        "description": "Enable input for VDCDC2 converter; logic high (1.3 × VCC minimum) enables regulator, logic low (0-0.4 V) disables it."       },       {         "number": "25",         "name": "DCDC1_EN",         "type": "input",-        "description": "Enable input for VDCDC1 converter; logic high (1.3 \u00d7 VCC minimum) enables regulator, logic low (0-0.4 V) disables it."+        "description": "Enable input for VDCDC1 converter; logic high (1.3 × VCC minimum) enables regulator, logic low (0-0.4 V) disables it."       },       {         "number": "26",         "name": "TRESPWRON",         "type": "input",-        "description": "Timing capacitor input for RESPWRON pulse generation; charges/discharges between 0.25 V and 1 V thresholds at 2 \u03bcA for 128 cycles (1 nF = 100 ms)."+        "description": "Timing capacitor input for RESPWRON pulse generation; charges/discharges between 0.25 V and 1 V thresholds at 2 μA for 128 cycles (1 nF = 100 ms)."       },       {         "number": "27",@@ -221,19 +221,19 @@         "number": "29",         "name": "SDAT",         "type": "bidirectional",-        "description": "I2C-compatible serial interface data and address line; open-drain with 4.7 k\u03a9 external pullup to VRTC; supports fast mode up to 400 kHz."+        "description": "I2C-compatible serial interface data and address line; open-drain with 4.7 kΩ external pullup to VRTC; supports fast mode up to 400 kHz."       },       {         "number": "30",         "name": "SCLK",         "type": "input",-        "description": "I2C-compatible serial interface clock input; open-drain with 4.7 k\u03a9 external pullup to VRTC; supports fast mode up to 400 kHz."+        "description": "I2C-compatible serial interface clock input; open-drain with 4.7 kΩ external pullup to VRTC; supports fast mode up to 400 kHz."       },       {         "number": "31",         "name": "PWRFAIL",         "type": "tri_state",-        "description": "Open-drain power-fail output; active low when PWRFAIL_SNS is below 1 V threshold (\u00b11%) with 40-60 mV hysteresis."+        "description": "Open-drain power-fail output; active low when PWRFAIL_SNS is below 1 V threshold (±1%) with 40-60 mV hysteresis."       },       {         "number": "32",@@ -257,7 +257,7 @@         "number": "35",         "name": "L2",         "type": "passive",-        "description": "Switch node connection point for VDCDC2 buck converter inductor with 1 M\u03a9 internal resistance to GND."+        "description": "Switch node connection point for VDCDC2 buck converter inductor with 1 MΩ internal resistance to GND."       },       {         "number": "36",@@ -275,13 +275,13 @@         "number": "38",         "name": "PWRFAIL_SNS",         "type": "input",-        "description": "Analog input to power-fail comparator with 1 V threshold (\u00b11%) and 40-60 mV hysteresis; drives PWRFAIL open-drain output."+        "description": "Analog input to power-fail comparator with 1 V threshold (±1%) and 40-60 mV hysteresis; drives PWRFAIL open-drain output."       },       {         "number": "39",         "name": "LOWBAT_SNS",         "type": "input",-        "description": "Analog input to low-battery comparator with 1 V threshold (\u00b11%) and 40-60 mV hysteresis; drives LOWBAT open-drain output."+        "description": "Analog input to low-battery comparator with 1 V threshold (±1%) and 40-60 mV hysteresis; drives LOWBAT open-drain output."       },       {         "number": "40",@@ -331,6 +331,46 @@     "viewers": {       "symbol": "viewers/symbol.html",       "footprint": "viewers/footprint.html"-    }+    },+    "models_3d": [+      {+        "file": "tps65023rsbr.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          5.0,+          5.0,+          0.77+        ],+        "zmin_mm": 0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "8f37bc7a9aab4742c34f137d9822c0352acc227532830034555744338483cdfc",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      },+      {+        "file": "tps65023rsbr-etched.step",+        "role": "eda",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          5.0,+          5.0,+          0.77+        ],+        "zmin_mm": 0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "115393f6c809342ed6fcf38beeb7471f62608441a1d58776d52e3fb62abe063f",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      }+    ]   }-}\ No newline at end of file+}
page.json+42−2
@@ -316,7 +316,47 @@     "viewers": {       "symbol": "viewers/symbol.html",       "footprint": "viewers/footprint.html"-    }+    },+    "models_3d": [+      {+        "file": "tps65023rsbr.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          5.0,+          5.0,+          0.77+        ],+        "zmin_mm": 0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "8f37bc7a9aab4742c34f137d9822c0352acc227532830034555744338483cdfc",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      },+      {+        "file": "tps65023rsbr-etched.step",+        "role": "eda",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          5.0,+          5.0,+          0.77+        ],+        "zmin_mm": 0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "115393f6c809342ed6fcf38beeb7471f62608441a1d58776d52e3fb62abe063f",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      }+    ]   },   "metadata": {     "specs": {@@ -363,4 +403,4 @@   "visibility": {     "public": true   }-}\ No newline at end of file+}