← Commit history

Initial commit: component/tps65023rsbr

Ray ·59fffd1c21 ·
2 files changed +420
README.mdadded+78
@@ -0,0 +1,78 @@+# TPS65023RSBR++**Texas Instruments** · Battery Management · WQFN-40-EP(5x5)++TPS65023RSBR from Texas Instruments, in a WQFN-40-EP(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | DEFDCDC3 | input | Input to set VDCDC3 default output to 1.8 V (low) or 3.3 V (high); alternatively connect to resistor divider between VDCDC3 and GND for 0.6 V to VINDCDC3 range. |+| 2 | VDCDC3 | input | Feedback voltage sense input connected directly to VDCDC3 output for regulation control. |+| 3 | PGND3 | power_in | Power ground for VDCDC3 converter with internal connection to all GND pins. |+| 4 | L3 | passive | Switch node connection point for VDCDC3 buck converter inductor with 1 MΩ internal resistance to GND. |+| 5 | VINDCDC3 | power_in | Input voltage supply (2.5 V to 6 V) for VDCDC3 converter tied to same rail as VINDCDC1, VINDCDC2, and VCC. |+| 6 | VINDCDC1 | power_in | Input voltage supply (2.5 V to 6 V) for VDCDC1 converter tied to same rail as VINDCDC2, VINDCDC3, and VCC. |+| 7 | L1 | passive | Switch node connection point for VDCDC1 buck converter inductor with 1 MΩ internal resistance to GND. |+| 8 | PGND1 | power_in | Power ground for VDCDC1 converter with internal connection to all GND pins. |+| 9 | VDCDC1 | input | Feedback voltage sense input connected directly to VDCDC1 output for regulation control. |+| 10 | DEFDCDC1 | input | Input to set VDCDC1 default output to 1.2 V (low) or 1.6 V (high); alternatively connect to resistor divider between VDCDC1 and GND for 0.6 V to VINDCDC1 range. |+| 11 | HOT_RESET | input | Push button input with 25-35 ms deglitch time to reset VDCDC1 output to default voltage and generate RESPWRON pulse. |+| 12 | DEFLDO1 | input | Digital input latched at power-up; combines with DEFLDO2 to set default LDO1 and LDO2 output voltage (four selectable combinations). |+| 13 | DEFLDO2 | input | Digital input latched at power-up; combines with DEFLDO1 to set default LDO1 and LDO2 output voltage (four selectable combinations). |+| 14 | VSYSIN | input | System voltage input with 2.55 V (falling) to 2.65 V (rising) threshold; when above threshold, switches VRTC to VSYSIN through PMOS switch with 375 mV max dropout at 30 mA. |+| 15 | VBACKUP | power_in | Backup battery input (2.73 V to 3.75 V) for VRTC supply when VSYSIN is below threshold; connects through PMOS switch with 375 mV max dropout at 30 mA. |+| 16 | VRTC | power_out | Real-time clock output providing 3 V at up to 30 mA; priority-selected from VSYSIN, VBACKUP, or internal LDO; triggers RESPWRON when below 2.4 V falling or 2.52 V rising threshold. |+| 17 | AGND2 | power_in | Analog ground pin; all analog ground pins (AGND1, AGND2) connected internally on the chip. |+| 18 | VLDO2 | power_out | LDO2 output (200 mA max) with 1 V to 3.3 V selectable range via I2C or DEFLDO pins; maximum dropout 300 mV at 200 mA load. |+| 19 | VINLDO | power_in | Input supply voltage (1.5 V to 6.5 V) for LDO1 and LDO2; can power from VCC or DC-DC converter output. |+| 20 | VLDO1 | power_out | LDO1 output (200 mA max) with 1 V to 3.15 V selectable range via I2C or DEFLDO pins; maximum dropout 300 mV at 200 mA load. |+| 21 | LOWBAT | tri_state | Open-drain output from low-battery comparator; active low when LOWBAT_SNS is below 1 V threshold (±1%) with 40-60 mV hysteresis. |+| 22 | LDO_EN | input | Enable input for LDO1 and LDO2; logic high enables regulators, logic low (0-0.4 V) disables them. |+| 23 | DCDC3_EN | input | Enable input for VDCDC3 converter; logic high (1.3 × VCC minimum) enables regulator, logic low (0-0.4 V) disables it. |+| 24 | DCDC2_EN | input | Enable input for VDCDC2 converter; logic high (1.3 × VCC minimum) enables regulator, logic low (0-0.4 V) disables it. |+| 25 | DCDC1_EN | input | Enable input for VDCDC1 converter; logic high (1.3 × VCC minimum) enables regulator, logic low (0-0.4 V) disables it. |+| 26 | TRESPWRON | input | Timing capacitor input for RESPWRON pulse generation; charges/discharges between 0.25 V and 1 V thresholds at 2 μA for 128 cycles (1 nF = 100 ms). |+| 27 | RESPWRON | tri_state | Open-drain system reset output held low until VRTC exceeds 2.52 V threshold, then released for duration set by TRESPWRON capacitor; also triggered by HOT_RESET activation. |+| 28 | INT | tri_state | Open-drain power-good output combining all DC-DC and LDO power-good comparators; active low when any enabled supply is out of regulation (10% below target). |+| 29 | SDAT | bidirectional | I2C-compatible serial interface data and address line; open-drain with 4.7 kΩ external pullup to VRTC; supports fast mode up to 400 kHz. |+| 30 | SCLK | input | I2C-compatible serial interface clock input; open-drain with 4.7 kΩ external pullup to VRTC; supports fast mode up to 400 kHz. |+| 31 | PWRFAIL | tri_state | Open-drain power-fail output; active low when PWRFAIL_SNS is below 1 V threshold (±1%) with 40-60 mV hysteresis. |+| 32 | DEFDCDC2 | input | Input to set VDCDC2 default output to 1.8 V (low) or 3.3 V (high); alternatively connect to resistor divider between VDCDC2 and GND for 0.6 V to VINDCDC2 range. |+| 33 | VDCDC2 | input | Feedback voltage sense input connected directly to VDCDC2 output for regulation control. |+| 34 | PGND2 | power_in | Power ground for VDCDC2 converter with internal connection to all GND pins. |+| 35 | L2 | passive | Switch node connection point for VDCDC2 buck converter inductor with 1 MΩ internal resistance to GND. |+| 36 | VINDCDC2 | power_in | Input voltage supply (2.5 V to 6 V) for VDCDC2 converter tied to same rail as VINDCDC1, VINDCDC3, and VCC. |+| 37 | VCC | power_in | Analog and digital supply voltage (2.5 V to 6 V) for all DC-DC converter control circuits and I2C interface; must connect to same rail as VINDCDC1/2/3. |+| 38 | PWRFAIL_SNS | input | Analog input to power-fail comparator with 1 V threshold (±1%) and 40-60 mV hysteresis; drives PWRFAIL open-drain output. |+| 39 | LOWBAT_SNS | input | Analog input to low-battery comparator with 1 V threshold (±1%) and 40-60 mV hysteresis; drives LOWBAT open-drain output. |+| 40 | AGND1 | power_in | Analog ground pin; all analog ground pins (AGND1, AGND2) connected internally on the chip. |+| 41 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | WQFN-40-EP(5x5) |+| Category | Power Management (PMIC) |+| Pins | 41 |++## CAD (KiCad official)++- Symbol: `TPS65023RSBR`+- Footprint: `Package_DFN_QFN:QFN-40-1EP_5x5mm_P0.4mm_EP3.6x3.6mm`+- 3D model: WQFN-40-EP(5x5) (KiCad packages3D, STEP)+- 3D model files: `tps65023rsbr-etched.step` / `tps65023rsbr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tps65023rsbr.step` / `tps65023rsbr.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/tps65023) (56 pp, sha256 `1a96eac1a7a70fa5`, retrieved 2026-09-24, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/tps65023rsbr-datasheet.pdf)
page.jsonadded+342
@@ -0,0 +1,342 @@+{+  "slug": "tps65023rsbr",+  "version": "0.1.0",+  "type": "component",+  "description": "Texas Instruments Battery Management, WQFN-40-EP(5x5). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "power management (pmic)",+    "tps65023rsbr",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "tps65023rsbr.kicad_sym",+    "tps65023rsbr.kicad_mod",+    "tps65023rsbr.glb",+    "tps65023rsbr.step",+    "tps65023rsbr.lbr",+    "docs/hero.png",+    "docs/tps65023rsbr-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "TPS65023RSBR",+    "manufacturer": "Texas Instruments",+    "package": "WQFN-40-EP(5x5)",+    "pin_count": 41,+    "category": "Power Management (PMIC)",+    "subcategory": "Battery Management",+    "datasheet": "https://www.ti.com/cn/lit/gpn/tps65023",+    "parts": {+      "symbol": "tps65023rsbr.kicad_sym",+      "footprint": "tps65023rsbr.kicad_mod",+      "model_3d": "tps65023rsbr-etched.glb",+      "model_3d_plain": "tps65023rsbr.glb",+      "model_3d_step": "tps65023rsbr-etched.step",+      "model_3d_step_plain": "tps65023rsbr.step",+      "lbr": "tps65023rsbr.lbr"+    },+    "distributor_links": {+      "lcsc": "C138723"+    },+    "pins": [+      {+        "number": "1",+        "name": "DEFDCDC3",+        "type": "input",+        "description": "Input to set VDCDC3 default output to 1.8 V (low) or 3.3 V (high); alternatively connect to resistor divider between VDCDC3 and GND for 0.6 V to VINDCDC3 range."+      },+      {+        "number": "2",+        "name": "VDCDC3",+        "type": "input",+        "description": "Feedback voltage sense input connected directly to VDCDC3 output for regulation control."+      },+      {+        "number": "3",+        "name": "PGND3",+        "type": "power_in",+        "description": "Power ground for VDCDC3 converter with internal connection to all GND pins."+      },+      {+        "number": "4",+        "name": "L3",+        "type": "passive",+        "description": "Switch node connection point for VDCDC3 buck converter inductor with 1 MΩ internal resistance to GND."+      },+      {+        "number": "5",+        "name": "VINDCDC3",+        "type": "power_in",+        "description": "Input voltage supply (2.5 V to 6 V) for VDCDC3 converter tied to same rail as VINDCDC1, VINDCDC2, and VCC."+      },+      {+        "number": "6",+        "name": "VINDCDC1",+        "type": "power_in",+        "description": "Input voltage supply (2.5 V to 6 V) for VDCDC1 converter tied to same rail as VINDCDC2, VINDCDC3, and VCC."+      },+      {+        "number": "7",+        "name": "L1",+        "type": "passive",+        "description": "Switch node connection point for VDCDC1 buck converter inductor with 1 MΩ internal resistance to GND."+      },+      {+        "number": "8",+        "name": "PGND1",+        "type": "power_in",+        "description": "Power ground for VDCDC1 converter with internal connection to all GND pins."+      },+      {+        "number": "9",+        "name": "VDCDC1",+        "type": "input",+        "description": "Feedback voltage sense input connected directly to VDCDC1 output for regulation control."+      },+      {+        "number": "10",+        "name": "DEFDCDC1",+        "type": "input",+        "description": "Input to set VDCDC1 default output to 1.2 V (low) or 1.6 V (high); alternatively connect to resistor divider between VDCDC1 and GND for 0.6 V to VINDCDC1 range."+      },+      {+        "number": "11",+        "name": "HOT_RESET",+        "type": "input",+        "description": "Push button input with 25-35 ms deglitch time to reset VDCDC1 output to default voltage and generate RESPWRON pulse."+      },+      {+        "number": "12",+        "name": "DEFLDO1",+        "type": "input",+        "description": "Digital input latched at power-up; combines with DEFLDO2 to set default LDO1 and LDO2 output voltage (four selectable combinations)."+      },+      {+        "number": "13",+        "name": "DEFLDO2",+        "type": "input",+        "description": "Digital input latched at power-up; combines with DEFLDO1 to set default LDO1 and LDO2 output voltage (four selectable combinations)."+      },+      {+        "number": "14",+        "name": "VSYSIN",+        "type": "input",+        "description": "System voltage input with 2.55 V (falling) to 2.65 V (rising) threshold; when above threshold, switches VRTC to VSYSIN through PMOS switch with 375 mV max dropout at 30 mA."+      },+      {+        "number": "15",+        "name": "VBACKUP",+        "type": "power_in",+        "description": "Backup battery input (2.73 V to 3.75 V) for VRTC supply when VSYSIN is below threshold; connects through PMOS switch with 375 mV max dropout at 30 mA."+      },+      {+        "number": "16",+        "name": "VRTC",+        "type": "power_out",+        "description": "Real-time clock output providing 3 V at up to 30 mA; priority-selected from VSYSIN, VBACKUP, or internal LDO; triggers RESPWRON when below 2.4 V falling or 2.52 V rising threshold."+      },+      {+        "number": "17",+        "name": "AGND2",+        "type": "power_in",+        "description": "Analog ground pin; all analog ground pins (AGND1, AGND2) connected internally on the chip."+      },+      {+        "number": "18",+        "name": "VLDO2",+        "type": "power_out",+        "description": "LDO2 output (200 mA max) with 1 V to 3.3 V selectable range via I2C or DEFLDO pins; maximum dropout 300 mV at 200 mA load."+      },+      {+        "number": "19",+        "name": "VINLDO",+        "type": "power_in",+        "description": "Input supply voltage (1.5 V to 6.5 V) for LDO1 and LDO2; can power from VCC or DC-DC converter output."+      },+      {+        "number": "20",+        "name": "VLDO1",+        "type": "power_out",+        "description": "LDO1 output (200 mA max) with 1 V to 3.15 V selectable range via I2C or DEFLDO pins; maximum dropout 300 mV at 200 mA load."+      },+      {+        "number": "21",+        "name": "LOWBAT",+        "type": "tri_state",+        "description": "Open-drain output from low-battery comparator; active low when LOWBAT_SNS is below 1 V threshold (±1%) with 40-60 mV hysteresis."+      },+      {+        "number": "22",+        "name": "LDO_EN",+        "type": "input",+        "description": "Enable input for LDO1 and LDO2; logic high enables regulators, logic low (0-0.4 V) disables them."+      },+      {+        "number": "23",+        "name": "DCDC3_EN",+        "type": "input",+        "description": "Enable input for VDCDC3 converter; logic high (1.3 × VCC minimum) enables regulator, logic low (0-0.4 V) disables it."+      },+      {+        "number": "24",+        "name": "DCDC2_EN",+        "type": "input",+        "description": "Enable input for VDCDC2 converter; logic high (1.3 × VCC minimum) enables regulator, logic low (0-0.4 V) disables it."+      },+      {+        "number": "25",+        "name": "DCDC1_EN",+        "type": "input",+        "description": "Enable input for VDCDC1 converter; logic high (1.3 × VCC minimum) enables regulator, logic low (0-0.4 V) disables it."+      },+      {+        "number": "26",+        "name": "TRESPWRON",+        "type": "input",+        "description": "Timing capacitor input for RESPWRON pulse generation; charges/discharges between 0.25 V and 1 V thresholds at 2 μA for 128 cycles (1 nF = 100 ms)."+      },+      {+        "number": "27",+        "name": "RESPWRON",+        "type": "tri_state",+        "description": "Open-drain system reset output held low until VRTC exceeds 2.52 V threshold, then released for duration set by TRESPWRON capacitor; also triggered by HOT_RESET activation."+      },+      {+        "number": "28",+        "name": "INT",+        "type": "tri_state",+        "description": "Open-drain power-good output combining all DC-DC and LDO power-good comparators; active low when any enabled supply is out of regulation (10% below target)."+      },+      {+        "number": "29",+        "name": "SDAT",+        "type": "bidirectional",+        "description": "I2C-compatible serial interface data and address line; open-drain with 4.7 kΩ external pullup to VRTC; supports fast mode up to 400 kHz."+      },+      {+        "number": "30",+        "name": "SCLK",+        "type": "input",+        "description": "I2C-compatible serial interface clock input; open-drain with 4.7 kΩ external pullup to VRTC; supports fast mode up to 400 kHz."+      },+      {+        "number": "31",+        "name": "PWRFAIL",+        "type": "tri_state",+        "description": "Open-drain power-fail output; active low when PWRFAIL_SNS is below 1 V threshold (±1%) with 40-60 mV hysteresis."+      },+      {+        "number": "32",+        "name": "DEFDCDC2",+        "type": "input",+        "description": "Input to set VDCDC2 default output to 1.8 V (low) or 3.3 V (high); alternatively connect to resistor divider between VDCDC2 and GND for 0.6 V to VINDCDC2 range."+      },+      {+        "number": "33",+        "name": "VDCDC2",+        "type": "input",+        "description": "Feedback voltage sense input connected directly to VDCDC2 output for regulation control."+      },+      {+        "number": "34",+        "name": "PGND2",+        "type": "power_in",+        "description": "Power ground for VDCDC2 converter with internal connection to all GND pins."+      },+      {+        "number": "35",+        "name": "L2",+        "type": "passive",+        "description": "Switch node connection point for VDCDC2 buck converter inductor with 1 MΩ internal resistance to GND."+      },+      {+        "number": "36",+        "name": "VINDCDC2",+        "type": "power_in",+        "description": "Input voltage supply (2.5 V to 6 V) for VDCDC2 converter tied to same rail as VINDCDC1, VINDCDC3, and VCC."+      },+      {+        "number": "37",+        "name": "VCC",+        "type": "power_in",+        "description": "Analog and digital supply voltage (2.5 V to 6 V) for all DC-DC converter control circuits and I2C interface; must connect to same rail as VINDCDC1/2/3."+      },+      {+        "number": "38",+        "name": "PWRFAIL_SNS",+        "type": "input",+        "description": "Analog input to power-fail comparator with 1 V threshold (±1%) and 40-60 mV hysteresis; drives PWRFAIL open-drain output."+      },+      {+        "number": "39",+        "name": "LOWBAT_SNS",+        "type": "input",+        "description": "Analog input to low-battery comparator with 1 V threshold (±1%) and 40-60 mV hysteresis; drives LOWBAT open-drain output."+      },+      {+        "number": "40",+        "name": "AGND1",+        "type": "power_in",+        "description": "Analog ground pin; all analog ground pins (AGND1, AGND2) connected internally on the chip."+      },+      {+        "number": "41",+        "name": "EP",+        "type": "passive",+        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-5",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [+          "exposed pad 41 added from the footprint",+          "dropped thermal pad ['EP'] absent from footprint"+        ],+        "pages_sent": 56,+        "cost_usd": 0.7005,+        "at": "2026-09-24T02:40:34"+      },+      "datasheet": {+        "url": "https://www.ti.com/cn/lit/gpn/tps65023",+        "pages": 56,+        "sha256": "1a96eac1a7a70fa5",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 41,+        "described": 41,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file