TPS65010RGZR

{
  "slug": "tps65010rgzr",
  "version": "0.1.0",
  "type": "component",
  "description": "Texas Instruments Battery Management, VQFN-48-EP(7x7). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power management (pmic)",
    "tps65010rgzr",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "tps65010rgzr.kicad_sym",
    "tps65010rgzr.kicad_mod",
    "tps65010rgzr.glb",
    "tps65010rgzr.step",
    "tps65010rgzr.lbr",
    "docs/hero.png",
    "docs/tps65010rgzr-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "tps65010rgzr-hero.glb",
    "tps65010rgzr-hero.overlay.json"
  ],
  "component": {
    "mpn": "TPS65010RGZR",
    "manufacturer": "Texas Instruments",
    "package": "VQFN-48-EP(7x7)",
    "pin_count": 49,
    "category": "Power Management (PMIC)",
    "subcategory": "Battery Management",
    "datasheet": "https://www.ti.com/cn/lit/gpn/tps65010",
    "parts": {
      "symbol": "tps65010rgzr.kicad_sym",
      "footprint": "tps65010rgzr.kicad_mod",
      "model_3d": "tps65010rgzr-hero.glb",
      "model_3d_plain": "tps65010rgzr.glb",
      "model_3d_step": "tps65010rgzr-etched.step",
      "model_3d_step_plain": "tps65010rgzr.step",
      "lbr": "tps65010rgzr.lbr"
    },
    "distributor_links": {
      "lcsc": "C702295",
      "digikey": "296-15241-2-ND",
      "mouser": "595-TPS65010RGZR"
    },
    "distributor_check": {
      "checked_at": "2026-10-11T01:43:04Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "296-15241-2-ND",
        "status": "found",
        "lifecycle": "Active"
      },
      "mouser": {
        "pn": "595-TPS65010RGZR",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "DEFCORE",
        "type": "input",
        "description": "Input signal that sets the default VCORE voltage: 0 = 1.5 V, 1 = 1.6 V."
      },
      {
        "number": "2",
        "name": "LED2",
        "type": "output",
        "description": "LED driver output with a blink rate programmable through the serial interface."
      },
      {
        "number": "3",
        "name": "VIB",
        "type": "output",
        "description": "Vibrator driver output, enabled through the serial interface."
      },
      {
        "number": "4",
        "name": "L2",
        "type": "passive",
        "description": "Switch pin of the VCORE step-down converter; the VCORE inductor is connected here."
      },
      {
        "number": "5",
        "name": "VINCORE",
        "type": "power_in",
        "description": "Input voltage for the VCORE step-down converter; must be connected to the same supply as VINMAIN and VCC."
      },
      {
        "number": "6",
        "name": "VCC",
        "type": "power_in",
        "description": "Supply for the digital and analog circuitry of the MAIN and CORE converters and the serial interface block, rated 2.5 V to 6.0 V and to be connected to the same supply as VINCORE and VINMAIN."
      },
      {
        "number": "7",
        "name": "VINMAIN_A",
        "type": "power_in",
        "description": "Input voltage for the VMAIN step-down converter; must be connected to the same supply as VINCORE and VCC."
      },
      {
        "number": "8",
        "name": "VINMAIN_B",
        "type": "power_in",
        "description": "Input voltage for the VMAIN step-down converter; must be connected to the same supply as VINCORE and VCC."
      },
      {
        "number": "9",
        "name": "L1_A",
        "type": "passive",
        "description": "Switch pin of the VMAIN converter; the VMAIN inductor is connected here."
      },
      {
        "number": "10",
        "name": "L1_B",
        "type": "passive",
        "description": "Switch pin of the VMAIN converter; the VMAIN inductor is connected here."
      },
      {
        "number": "11",
        "name": "PG",
        "type": "output",
        "description": "Open-drain output that indicates when a valid power supply is present for the charger."
      },
      {
        "number": "12",
        "name": "DEFMAIN",
        "type": "input",
        "description": "Input signal that sets the default VMAIN voltage: 0 = 3.0 V, 1 = 3.3 V."
      },
      {
        "number": "13",
        "name": "VMAIN",
        "type": "input",
        "description": "VMAIN feedback voltage sense input; connect directly to VMAIN."
      },
      {
        "number": "14",
        "name": "PS_SEQ",
        "type": "input",
        "description": "Sets the power-up/down sequence of the step-down converters: PS_SEQ = 0 ramps the core first and down last, PS_SEQ = 1 ramps the main regulator first and down last."
      },
      {
        "number": "15",
        "name": "PGND1_A",
        "type": "power_in",
        "description": "Power ground for the VMAIN converter."
      },
      {
        "number": "16",
        "name": "PGND1_B",
        "type": "power_in",
        "description": "Power ground for the VMAIN converter."
      },
      {
        "number": "17",
        "name": "GPIO4",
        "type": "bidirectional",
        "description": "General-purpose open-drain input/output."
      },
      {
        "number": "18",
        "name": "GPIO3",
        "type": "bidirectional",
        "description": "General-purpose open-drain input/output."
      },
      {
        "number": "19",
        "name": "VINLDO2",
        "type": "power_in",
        "description": "Input voltage for LDO2, with an input range of 1.8 V to 6.5 V."
      },
      {
        "number": "20",
        "name": "VLDO2",
        "type": "power_out",
        "description": "Output and feedback voltage for LDO2, with an output range of 0.9 V to VI(LDO1-2)."
      },
      {
        "number": "21",
        "name": "AGND1",
        "type": "power_in",
        "description": "Analog ground connection; all analog ground pins are connected internally on the chip."
      },
      {
        "number": "22",
        "name": "VINLDO1",
        "type": "power_in",
        "description": "Input voltage for LDO1, with an input range of 1.8 V to 6.5 V."
      },
      {
        "number": "23",
        "name": "VFB_LDO1",
        "type": "input",
        "description": "Feedback input from an external resistive divider for LDO1."
      },
      {
        "number": "24",
        "name": "VLDO1",
        "type": "power_out",
        "description": "Output voltage for LDO1, monitored by a power-good comparator that generates the RESPWRON system reset."
      },
      {
        "number": "25",
        "name": "GPIO2",
        "type": "bidirectional",
        "description": "General-purpose open-drain input/output."
      },
      {
        "number": "26",
        "name": "GPIO1",
        "type": "bidirectional",
        "description": "General-purpose open-drain input/output."
      },
      {
        "number": "27",
        "name": "NC",
        "type": "unconnected",
        "description": "No internal connection; the datasheet specifies that this pin be connected to GND."
      },
      {
        "number": "28",
        "name": "IFLSB",
        "type": "input",
        "description": "LSB of the serial interface address, used to distinguish two devices with the same address."
      },
      {
        "number": "29",
        "name": "SDAT",
        "type": "bidirectional",
        "description": "Serial interface data/address line."
      },
      {
        "number": "30",
        "name": "SCLK",
        "type": "input",
        "description": "Serial interface clock line."
      },
      {
        "number": "31",
        "name": "HOT_RESET",
        "type": "input",
        "description": "Push-button reset input used to reboot or wake up the processor through the TPS65010."
      },
      {
        "number": "32",
        "name": "MPU_RESET",
        "type": "output",
        "description": "Open-drain processor reset output generated by a user-activated HOT_RESET."
      },
      {
        "number": "33",
        "name": "RESPWRON",
        "type": "output",
        "description": "Open-drain system reset output generated according to the state of the LDO1 output voltage."
      },
      {
        "number": "34",
        "name": "PWRFAIL",
        "type": "output",
        "description": "Open-drain output, active low when the UVLO comparator indicates a low VBAT condition, when shutdown is about to occur due to overtemperature, or when the battery cover is removed."
      },
      {
        "number": "35",
        "name": "INT",
        "type": "output",
        "description": "Open-drain output, active low, that indicates a charge fault or termination or that a regulator output is below its lower tolerance level."
      },
      {
        "number": "36",
        "name": "LOW_PWR",
        "type": "input",
        "description": "Input signal indicating deep-sleep mode, in which VCORE is lowered to a predefined value or disabled."
      },
      {
        "number": "37",
        "name": "ISET",
        "type": "input",
        "description": "External charge-current setting resistor connection for use with the AC adapter."
      },
      {
        "number": "38",
        "name": "TS",
        "type": "input",
        "description": "Battery temperature sense input."
      },
      {
        "number": "39",
        "name": "BATT_COVER",
        "type": "input",
        "description": "Indicates whether the battery cover is in place (VCC = in place, 0 = not in place); when it goes low the main and core converters are shut down."
      },
      {
        "number": "40",
        "name": "AC",
        "type": "input",
        "description": "Charger input voltage from the AC adapter; can be left open or connected to ground if the charger is not used."
      },
      {
        "number": "41",
        "name": "VBAT_A",
        "type": "input",
        "description": "Sense input for the battery voltage; connect directly with the battery."
      },
      {
        "number": "42",
        "name": "VBAT_B",
        "type": "power_out",
        "description": "Power output of the battery charger; connect directly with the battery."
      },
      {
        "number": "43",
        "name": "USB",
        "type": "input",
        "description": "Charger input voltage from the USB port; can be left open or connected to ground if the charger is not used."
      },
      {
        "number": "44",
        "name": "AGND2",
        "type": "power_in",
        "description": "Analog ground connection; all analog ground pins are connected internally on the chip."
      },
      {
        "number": "45",
        "name": "AGND3",
        "type": "power_in",
        "description": "Analog ground connection; all analog ground pins are connected internally on the chip."
      },
      {
        "number": "46",
        "name": "PGND2",
        "type": "power_in",
        "description": "Power ground for the VCORE converter."
      },
      {
        "number": "47",
        "name": "PB_ONOFF",
        "type": "input",
        "description": "Push-button enable pin, also used to wake up the processor from low-power mode."
      },
      {
        "number": "48",
        "name": "VCORE",
        "type": "power_in",
        "description": "VCORE feedback voltage sense input; connect directly to VCORE."
      },
      {
        "number": "49",
        "name": "Thermal pad",
        "type": "passive",
        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The thermal pad is printed as '-' in the pin table (labelled 'Thermal pad - Connect the thermal pad ; The pinout comes from the Pin Functions table on pages 3-4 because the pin-diagram text on page 3 is; Package match: the datasheet describes the RGZ package as a 48-pin VQFN with a PowerPAD exposed pad ",
          "exposed pad 49 added from the footprint"
        ],
        "pages_sent": 14,
        "cost_usd": 0.1177,
        "at": "2026-10-11T01:42:47"
      },
      "datasheet": {
        "url": "https://www.ti.com/cn/lit/gpn/tps65010",
        "pages": 64,
        "sha256": "e42966d0d03accdf",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 49,
        "described": 49,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "tps65010rgzr.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          7.0,
          7.0,
          0.77
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "f2b38b0b4bf967c77e683e8d4599608b9f0503055ec535b93c4ebb5d0163e916",
        "checked": "2026-10-11",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "tps65010rgzr-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          7.0,
          7.0,
          0.77
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "2067228292db1a364d021e866bfc0ba63a08d14fbcaee89d9b8995e0d42c9d5a",
        "checked": "2026-10-11",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}