TPS65000TRTERQ1

{
  "slug": "tps65000trterq1",
  "version": "0.1.0",
  "type": "component",
  "description": "Texas Instruments Power Management - Specialized, WQFN-16-EP(3x3). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power management (pmic)",
    "tps65000trterq1",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "tps65000trterq1.kicad_sym",
    "tps65000trterq1.kicad_mod",
    "tps65000trterq1.glb",
    "tps65000trterq1.step",
    "tps65000trterq1.lbr",
    "docs/hero.png",
    "docs/tps65000trterq1-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "tps65000trterq1-hero.glb",
    "tps65000trterq1-hero.overlay.json"
  ],
  "component": {
    "mpn": "TPS65000TRTERQ1",
    "manufacturer": "Texas Instruments",
    "package": "WQFN-16-EP(3x3)",
    "pin_count": 17,
    "category": "Power Management (PMIC)",
    "subcategory": "Power Management - Specialized",
    "datasheet": "https://www.ti.com/cn/lit/gpn/tps65000-q1",
    "parts": {
      "symbol": "tps65000trterq1.kicad_sym",
      "footprint": "tps65000trterq1.kicad_mod",
      "model_3d": "tps65000trterq1-hero.glb",
      "model_3d_plain": "tps65000trterq1.glb",
      "model_3d_step": "tps65000trterq1-etched.step",
      "model_3d_step_plain": "tps65000trterq1.step",
      "lbr": "tps65000trterq1.lbr"
    },
    "distributor_links": {
      "lcsc": "C702292",
      "digikey": "296-40862-2-ND",
      "mouser": "595-TPS65000TRTERQ1"
    },
    "distributor_check": {
      "checked_at": "2026-10-08T04:16:25Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "296-40862-2-ND",
        "status": "found",
        "lifecycle": "Active"
      },
      "mouser": {
        "pn": "595-TPS65000TRTERQ1",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "EN_LDO1",
        "type": "input",
        "description": "Enable input for LDO1."
      },
      {
        "number": "2",
        "name": "EN_LDO2",
        "type": "input",
        "description": "Enable input for LDO2."
      },
      {
        "number": "3",
        "name": "PG",
        "type": "output",
        "description": "Open-drain active-low power-good output."
      },
      {
        "number": "4",
        "name": "PGND",
        "type": "power_in",
        "description": "Power ground, connected to the thermal pad; the datasheet says to star AGND back to PGND as close to the IC as possible."
      },
      {
        "number": "5",
        "name": "SW",
        "type": "output",
        "description": "Switch pin; connect the inductor here."
      },
      {
        "number": "6",
        "name": "VINDCDC",
        "type": "power_in",
        "description": "Input voltage to the DC-DC converter and all other control blocks."
      },
      {
        "number": "7",
        "name": "MODE",
        "type": "input",
        "description": "Selects forced-PWM or PWM-to-PFM automatic-transition mode."
      },
      {
        "number": "8",
        "name": "EN_DCDC",
        "type": "input",
        "description": "Enable input for the DC-DC converter."
      },
      {
        "number": "9",
        "name": "FB_DCDC",
        "type": "input",
        "description": "Voltage feedback input to the DC-DC error amplifier."
      },
      {
        "number": "10",
        "name": "AGND",
        "type": "power_in",
        "description": "Analog ground; star back to PGND as close to the IC as possible."
      },
      {
        "number": "11",
        "name": "FB_LDO1",
        "type": "input",
        "description": "Voltage feedback input to the LDO1 error amplifier."
      },
      {
        "number": "12",
        "name": "VLDO1",
        "type": "power_out",
        "description": "LDO1 output voltage."
      },
      {
        "number": "13",
        "name": "VINLDO1",
        "type": "power_in",
        "description": "Input voltage to LDO1."
      },
      {
        "number": "14",
        "name": "FB_LDO2",
        "type": "input",
        "description": "Voltage feedback input to the LDO2 error amplifier."
      },
      {
        "number": "15",
        "name": "VLDO2",
        "type": "power_out",
        "description": "LDO2 output voltage."
      },
      {
        "number": "16",
        "name": "VINLDO2",
        "type": "power_in",
        "description": "Input voltage to LDO2."
      },
      {
        "number": "17",
        "name": "EP",
        "type": "passive",
        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Pin table on page 3 lists the EP as an exposed thermal pad with no type; typed as passive. The datas; Datasheet lists VIN pins (VINDCDC, VINLDO1, VINLDO2) as type I and SW/PG/VLDO as O; mapped to KiCad ; Pin descriptions are taken from the page 3 Pin Functions table and kept as printed; electrical limit",
          "exposed pad 17 added from the footprint",
          "dropped thermal pad ['EP'] absent from footprint"
        ],
        "pages_sent": 7,
        "cost_usd": 0.0564,
        "at": "2026-10-08T04:16:09"
      },
      "datasheet": {
        "url": "https://www.ti.com/cn/lit/gpn/tps65000-q1",
        "pages": 30,
        "sha256": "df14bebab40e3feb",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 17,
        "described": 17,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "tps65000trterq1.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          3.0,
          3.0,
          0.785
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "3eb81ffac423a66cdcfead8efe56401da171edaf1f2257049aad7b2d3900f6c8",
        "checked": "2026-10-08",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "tps65000trterq1-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          3.0,
          3.0,
          0.785
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "72a6196ca88062cef1f437eac1308c12f922158c8894a57cca1a12e27719f640",
        "checked": "2026-10-08",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}