Generated by kicad-footprint-generator · KiCad file format 20260206
TPS64201DBVR
Texas Instruments · DC-DC Converters · SOT-23-6
TPS64201DBVR from Texas Instruments, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | EN | input | Enable input; logic low enables converter, logic high forces shutdown mode with <1 µA quiescent current. |
| 2 | GND | power_in | Ground reference. |
| 3 | FB | input | Feedback voltage input for external resistor divider network to set output voltage. |
| 4 | ISENSE | input | Current sense input for optional external sense resistor between VIN and ISENSE. |
| 5 | VIN | power_in | Supply voltage input with 1.8 V to 6.5 V operating range. |
| 6 | SW | output | Gate driver output connected to external P-channel MOSFET gate. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-6 |
| Category | Power Management (PMIC) |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input voltage range | VI | 1.8 | 6.5 | V | 3 | ||
| Operating quiescent current | I(Q) | 20 | 35 | µA | IO = 0 mA | 3 | |
| Shutdown current | I(SD) | 0.1 | 1 | µA | EN = VI | 3 | |
| Feedback leakage current | 0.01 | 0.2 | µA | 3 | |||
| Feedback voltage tolerance | -2 | 2 | % | 3 | |||
| Reference voltage for current limit | V(ISENSE) | 90 | 105 | 120 | mV | 3 | |
| ISENSE leakage current | 0.01 | 0.2 | µA | 3 | |||
| EN trip point hysteresis | 115 | mV | 3 | ||||
| EN input leakage current | Ilkg | 0.01 | 0.2 | µA | EN = GND or VIN | 3 | |
| EN high level input voltage | VIH | 1.3 | V | Device is off | 3 | ||
| EN low level input voltage | VIL | 0.3 | V | Device is operating | 3 | ||
| Minimum on time (TPS64200, TPS64201, TPS64202) | ton | 1.36 | 1.6 | 1.84 | µs | 3 | |
| Minimum off time (TPS64200, TPS64201, TPS64203) | toff | 0.44 | 0.55 | 0.66 | µs | 3 | |
| Supply voltage at VIN (recommended operating) | VIN | 1.8 | 6.5 | V | 2 | ||
| Operating junction temperature (recommended operating) | TJ | -40 | 125 | °C | 2 | ||
| Supply voltage VIN (absolute maximum) | VIN | -0.3 | 7 | V | 2 | ||
| Voltage at EN, SW, ISENSE (absolute maximum) | EN, SW, ISENSE | -0.3 | V | Maximum printed as VIN | 2 | ||
| Voltage at FB (absolute maximum) | FB | -0.3 | 3.3 | V | 2 | ||
| Maximum junction temperature (absolute maximum) | TJ | 150 | °C | 2 | |||
| Operating free-air temperature (absolute maximum) | TA | -40 | 85 | °C | 2 | ||
| Storage temperature (absolute maximum) | Tsgt | -65 | 150 | °C | 2 | ||
| Lead temperature (absolute maximum) | 300 | °C | 1,6 mm (1/16 inch) from case for 10 seconds | 2 | |||
| Line regulation | 0.6 | %/V | Measured with circuit according to Figure 1 | 3 | |||
| Load regulation | 0.6 | %/A | Measured with circuit according to Figure 1; VI = 3.8 V | 3 | |||
| Efficiency (VO = 3.3 V) | η | 94 | % | Measured with circuit according to Figure 1; VI = 3.8 V, VO = 3.3 V, IO = 1000 mA | 3 | ||
| Efficiency (VO = 1.2 V) | η | 80 | % | Measured with circuit according to Figure 1; VI = 3.8 V, VO = 1.2 V, IO = 800 mA | 3 | ||
| Start-up time | 0.25 | ms | IO = 0 mA, time from active EN to VO, CO = 47 µF | 3 | |||
| P-channel MOSFET on-resistance (VI ≥ 2.5 V) | rDS(ON) | 4 | Ω | VI ≥ 2.5 V | 3 | ||
| P-channel MOSFET on-resistance (VI = 1.8 V) | rDS(ON) | 6 | Ω | VI = 1.8 V | 3 | ||
| N-channel MOSFET on-resistance (VI ≥ 2.5 V) | rDS(ON) | 4 | Ω | VI ≥ 2.5 V | 3 | ||
| N-channel MOSFET on-resistance (VI = 1.8 V) | rDS(ON) | 6 | Ω | VI = 1.8 V | 3 | ||
| Maximum gate drive output current, SW | IO | 150 | mA | 3 | |||
| Feedback voltage | VFB | 1.213 | V | 3 | |||
| Undervoltage lockout threshold | V(UVLO) | 1.7 | V | 3 | |||
| Reduced on time 1 (TPS64201, TPS64202) | 0.8 | µs | 3 | ||||
| Reduced on time 2 (TPS64201, TPS64202) | 0.4 | µs | 3 | ||||
| Reduced on time 3 (TPS64201, TPS64202) | 0.2 | µs | 3 | ||||
| Package power rating | 400 | mW | TA ≤ 25°C | 2 | |||
| Package power derating factor | 4 | mW/°C | Above TA = 25°C | 2 | |||
| Thermal resistance junction to ambient, 6-pin SOT23 | RθJA | 250 | °C/W | 2 |
CAD (KiCad official)
- Symbol:
TPS64201DBVR - Footprint:
Package_TO_SOT_SMD:SOT-23-6 - 3D model: SOT-23-6 (KiCad packages3D, STEP)
- 3D model files:
tps64201dbvr-etched.step/tps64201dbvr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tps64201dbvr.step/tps64201dbvr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (30 pp, sha256
a5307daf8b65ff14, retrieved 2026-10-01, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).