main
Ray
Publish 0.1.0
157bebe
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194
{
"slug": "tps62933fdrlr",
"version": "0.1.0",
"type": "component",
"description": "Texas Instruments DC-DC Converters, SOT-583. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
"tags": [
"component",
"power management (pmic)",
"tps62933fdrlr",
"factory-2.0.0",
"extractor-text"
],
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"tps62933fdrlr.kicad_sym",
"tps62933fdrlr.kicad_mod",
"tps62933fdrlr.glb",
"tps62933fdrlr.step",
"tps62933fdrlr.lbr",
"docs/hero.png",
"docs/tps62933fdrlr-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"tps62933fdrlr-hero.glb",
"tps62933fdrlr-hero.overlay.json"
],
"component": {
"mpn": "TPS62933FDRLR",
"manufacturer": "Texas Instruments",
"package": "SOT-583",
"pin_count": 8,
"category": "Power Management (PMIC)",
"subcategory": "DC-DC Converters",
"datasheet": "https://www.ti.com/lit/ds/symlink/tps62933f.pdf",
"parts": {
"symbol": "tps62933fdrlr.kicad_sym",
"footprint": "tps62933fdrlr.kicad_mod",
"model_3d": "tps62933fdrlr-hero.glb",
"model_3d_plain": "tps62933fdrlr.glb",
"model_3d_step": "tps62933fdrlr-etched.step",
"model_3d_step_plain": "tps62933fdrlr.step",
"lbr": "tps62933fdrlr.lbr"
},
"distributor_links": {
"lcsc": "C5219272",
"digikey": "296-TPS62933FDRLRTR-ND",
"mouser": "595-TPS62933FDRLR"
},
"distributor_check": {
"checked_at": "2026-11-18T00:58:51Z",
"source": "Component Ocean /api/assign-pns",
"digikey": {
"pn": "296-TPS62933FDRLRTR-ND",
"status": "found"
},
"mouser": {
"pn": "595-TPS62933FDRLR",
"status": "found"
}
},
"pins": [
{
"number": "1",
"name": "RT",
"type": "input",
"description": "Frequency programming input: float for 500 kHz, tie to GND for 1.2 MHz, or connect to an RT timing resistor to set the 200 kHz to 2.2 MHz switching range."
},
{
"number": "2",
"name": "EN",
"type": "input",
"description": "Enable input: driving EN high or leaving it floating enables the converter, and an external resistor divider can implement an adjustable VIN UVLO; absolute maximum is 6 V."
},
{
"number": "3",
"name": "VIN",
"type": "power_in",
"description": "Supply input to the internal LDO and high-side FET, with input bypass capacitors connected directly to this pin and GND; recommended input range is 3.8 V to 30 V."
},
{
"number": "4",
"name": "GND",
"type": "power_in",
"description": "Ground pin connected to the low-side FET source and controller ground, with the path to CIN kept as short as possible."
},
{
"number": "5",
"name": "SW",
"type": "power_out",
"description": "Switching output connected to the high-side FET source and low-side FET drain, which drives the power inductor; absolute maximum DC is 32 V."
},
{
"number": "6",
"name": "BST",
"type": "passive",
"description": "Bootstrap capacitor connection for the high-side FET driver; connect a high-quality 100-nF ceramic capacitor from this pin to SW."
},
{
"number": "7",
"name": "SS",
"type": "input",
"description": "Soft-start control pin for the TPS62933F; a minimum 6.8-nF ceramic capacitor sets the minimum soft-start time to approximately 1 ms, and the pin must not float."
},
{
"number": "8",
"name": "FB",
"type": "input",
"description": "Output feedback input connected to the tap of an external resistor divider from the output to GND to set the output voltage from 0.8 V to 22 V."
}
],
"provenance": {
"extractor": "extract_pins 0.3",
"factory_chain": {
"factory": "2.0.0",
"extractor": "extract_pins 0.3",
"primary_model": "claude-haiku-5-5",
"primary_mode": "text",
"consensus_model": "claude-sonnet-5-5",
"consensus": "agreed",
"guards": "pin_guards 0.1: passed",
"guard_notes": [
"extractor flagged: The Figure 7-1 pin diagram text for TPS62932/TPS62933/TPS62933F is garbled and its label order does ; Pin 7 is listed as SS/PG in Table 7-1. For TPS62933FDRLR (the FCCM/SS variant) the pin is the SS sof; The datasheet gives no headline electrical spec for the SOT583 package beyond the device-level ratin"
],
"pages_sent": 8,
"cost_usd": 0.0284,
"at": "2026-11-18T00:58:24"
},
"datasheet": {
"url": "https://www.ti.com/lit/ds/symlink/tps62933f.pdf",
"pages": 51,
"sha256": "16ec2eac43c7374e",
"source_tier": "mfr",
"citation": "Texas Instruments datasheet"
},
"cad": "Adom_Gen derived land; symbol and 3D generated",
"pins": {
"total": 8,
"described": 8,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "tps62933fdrlr.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
2.2,
2.1,
0.6
],
"zmin_mm": 0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "b84cd6321c961e39ad3bdedc4adda9729ce6e2b57421e0966d6bc438980dc60b",
"checked": "2026-11-18",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "tps62933fdrlr-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
2.2,
2.1,
0.6
],
"zmin_mm": 0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "11410417bcc41651ae9d286e1861781307bd1b53945d9b1bb2fe9d97de7453c4",
"checked": "2026-11-18",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
]
}
}