component
TPS62841YBGR
Public Made by Adomby adom
Texas Instruments DC-DC Converters, DSBGA-6(1x1.5). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownTPS62841YBGR
Texas Instruments · DC-DC Converters · DSBGA-6(1x1.5)
TPS62841YBGR from Texas Instruments, in a DSBGA-6(1x1.5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| A1 | GND | power_in | GND supply pin; connect close to input and output capacitor GND terminals. |
| A2 | VOS | input | Output voltage sense pin for feedback divider and regulation loop; discharges VOUT via internal MOSFET when disabled. |
| B1 | VIN | power_in | VIN power supply pin; connect 4.7-µF ceramic capacitor close to this pin for noise and spike suppression. |
| B2 | SW | output | Switch pin connected to internal MOSFET switches; connect inductor to this terminal. |
| C1 | EN | input | Enable pin; high level enables device, low level disables; internal pulldown resistor included. |
| C2 | VSET | input | Voltage setting pin; connecting resistor to GND sets output voltage 0.8V to 1.55V in 50-mV steps. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | DSBGA-6(1x1.5) |
| Category | Power Management (PMIC) |
| Pins | 6 |
CAD (KiCad official)
- Symbol:
TPS62841YBGR - Footprint:
Package_BGA:Texas_DSBGA-6_0.95x1.488mm_Layout2x3_P0.4mm - 3D model: DSBGA-6(1x1.5), generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 0.35 mm nominal DSBGA height). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions are nominal, not the manufacturer's CAD (STEP)
- 3D model files:
tps62841ybgr-etched.step/tps62841ybgr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tps62841ybgr.step/tps62841ybgr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (45 pp, sha256
da218f3f1c6e6463, retrieved 2026-10-01, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).