main
History Download
Ray tps62590drvr: specified limits as data (metadata.characteristics, 40 rows from the datasheet) c14f38a

TPS62590DRVR

Texas Instruments · DC-DC Converters · WSON-6-EP(2x2)

TPS62590DRVR from Texas Instruments, in a WSON-6-EP(2x2). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 SW output Switch pin connected to internal MOSFET switches; connect external inductor between this terminal and the output capacitor.
2 MODE input Mode selection pin; logic high forces fixed-frequency PWM mode, logic low enables power-save mode with automatic transition from PFM to PWM.
3 FB input Feedback pin for internal regulation loop; connect external resistor divider for adjustable output or directly to output capacitor for fixed output versions.
4 EN input Enable pin; logic high enables device, logic low forces shutdown mode; pin must be terminated.
5 VIN power_in Input power supply pin; rated for input voltage range from 2.5 V to 5.5 V.
6 GND power_in Ground supply pin; provides ground reference for device operation.
7 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package WSON-6-EP(2x2)
Category Power Management (PMIC)
Pins 7

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input voltage VIN -0.3 7 V 4
Voltage at EN, MODE -0.3 V 4
Voltage on SW -0.3 7 V 4
Maximum operating junction temperature TJ -40 125 °C 4
Storage temperature Tstg -65 150 °C 4
Supply voltage VIN 2.5 5.5 V 4
Output voltage for adjustable voltage 0.75 V 4
Operating ambient temperature TA -40 85 °C 4
Operating junction temperature TJ -40 125 °C 4
Input voltage range VIN 2.5 5.5 V 5
Output current IOUT 1000 mA VIN 2.7 V to 5.5 V 5
Output current IOUT 600 mA VIN 2.5 V to 2.7 V 5
Shutdown current ISD 0.5 μA EN = GND 5
Input bias current, EN, MODE IIN 0.01 1 μA EN, MODE = GND or VIN 5
High level input voltage, EN, MODE VIH 1 V 2.5 V ≤ VIN ≤ 5.5 V 5
Low level input voltage, EN, MODE VIL 0 0.4 V 2.5 V ≤ VIN ≤ 5.5 V 5
Feedback voltage, PWM mode VFB(PWM) -2.5 0 2.5 % MODE = VIN, PWM operation, 2.5 V ≤ VIN ≤ 5.5 V, see (2) 5
Feedback voltage, PFM mode VFB(PFM) 1 % MODE = GND, device in PFM mode, voltage positioning active, see (1) 5
Load regulation -1 %/A 5
Start-up time tStart Up 500 μs Time from active EN to reach 95% of VOUT 5
Leakage current into SW pin Ilkg 0.1 1 μA VIN = 3.6 V, VIN = VOUT = VSW, EN = GND, see (3) 5
Adjustable output voltage range VO 0.75 V 5
Junction-to-ambient thermal resistance RθJA 67.8 °C/W 4
Junction-to-case (top) thermal resistance RθJC(top) 88.5 °C/W 4
Junction-to-board thermal resistance RθJB 37.2 °C/W 4
Junction-to-top characterization parameter ψJT 2 °C/W 4
Junction-to-board characterization parameter ψJB 37.6 °C/W 4
Junction-to-case (bottom) thermal resistance RθJC(bot) 7.9 °C/W 4
Quiescent current, PFM no switching IQ 15 μA IOUT = 0 mA, PFM mode enabled (MODE = GND), device not switching, see (1) 5
Quiescent current, PWM no load IQ 3.8 mA IOUT = 0 mA, switching with no load (MODE = VIN), PWM operation, VOUT = 1.8 V, VIN = 3 V 5
Undervoltage lockout threshold, falling UVLO 1.85 V Falling 5
Undervoltage lockout threshold, rising UVLO 1.95 V Rising 5
High side MOSFET on-resistance RDS(on) 250 mΩ VIN = VGS = 3.6 V, TA = 25°C 5
Low side MOSFET on-resistance RDS(on) 190 mΩ VIN = VGS = 3.6 V, TA = 25°C 5
Forward current limit, high side and low side ILIMF 1.19 1.4 1.68 A VIN = VGS = 3.6 V 5
Thermal shutdown TSD 140 °C Increasing junction temperature 5
Thermal shutdown hysteresis 20 °C Decreasing junction temperature 5
Oscillator frequency fSW 2.25 MHz 2.5 V ≤ VIN ≤ 5.5 V 5
Reference voltage VREF 600 mV 5
Soft-start ramp-up time, 5% to 95% of VOUT tRamp 250 μs Time to ramp from 5% to 95% of VOUT 5

CAD (KiCad official)

  • Symbol: TPS62590DRVR
  • Footprint: Package_SON:WSON-6-1EP_2x2mm_P0.65mm_EP1x1.6mm
  • 3D model: WSON-6-EP(2x2) (KiCad packages3D, STEP)
  • Annotated 3D hero: tps62590drvr-hero.glb (dashed pad outlines, silkscreen with pin 1, signal names; the adom-hero standard) is what the viewer shows. Downloads and EDA use the clean model, tps62590drvr-etched.glb.
  • 3D model files: tps62590drvr-etched.step / tps62590drvr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tps62590drvr.step / tps62590drvr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (30 pp, sha256 3d6d1c82b5a9c082, retrieved 2026-09-26, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-4-6 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF