main
Ray
tps62260drvr: specified limits as data (metadata.characteristics, 26 rows from the datasheet)
b50a752
TPS62260DRVR
Texas Instruments · DC-DC Converters · WSON-6-EP(2x2)
TPS62260DRVR from Texas Instruments, in a WSON-6-EP(2x2). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SW | tri_state | Switch node connected to internal MOSFET switches; connect external inductor between this terminal and the output capacitor for energy transfer and current sensing. |
| 2 | MODE | input | Mode select pin (WSON-only); logic high forces continuous PWM mode at 2.25 MHz, logic low enables power save mode with automatic PFM to PWM transition. |
| 3 | FB | input | Feedback pin for internal output voltage regulation; connect external resistor divider for adjustable output versions or directly to output capacitor for fixed voltage versions. |
| 4 | EN | input | Active-high enable pin; logic low forces device into shutdown mode (<1 µA), logic high enables operation; must be terminated. |
| 5 | VIN | power_in | Input power supply pin; supports 2 V to 6 V range for single Li-ion cells and alkaline batteries. |
| 6 | GND | power_in | Ground reference supply pin. |
| 7 | PAD | power_in | Exposed thermal pad connected to ground; must be soldered to PCB ground plane via multiple vias per SLUA271 for thermal dissipation and mechanical support. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | WSON-6-EP(2x2) |
| Category | Power Management (PMIC) |
| Pins | 7 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VIN Input voltage range | VIN | 2.3 | 6 | V | 5 | ||
| Shutdown current | ISD | 0.1 | 1 | μA | EN = GND | 5 | |
| High level input voltage, EN, MODE | VIH | 1 | V | 2 V ≤ VIN ≤ 6 V | 5 | ||
| Low level input voltage, EN, MODE | VIL | 0 | 0.4 | V | 2 V ≤ VIN ≤ 6 V | 5 | |
| Input bias current, EN, MODE | IIN | 0.01 | 1 | μA | EN, MODE = GND or VIN | 5 | |
| High side MOSFET on-resistance | RDS(on) | 240 | 480 | mΩ | VIN = VGS = 3.6 V, TA = 25°C | 5 | |
| Low side MOSFET on-resistance | RDS(on) | 185 | 380 | mΩ | VIN = VGS = 3.6 V, TA = 25°C | 5 | |
| Forward current limit MOSFET high side and low side | ILIMF | 0.8 | 1 | 1.2 | A | VIN = VGS = 3.6 V | 5 |
| Oscillator frequency | fSW | 2 | 2.25 | 2.5 | MHz | 2 V ≤ VIN ≤ 6 V | 5 |
| Adjustable output voltage range | VOUT | 0.6 | V | 5 | |||
| Leakage current into SW pin | Ilkg | 0.1 | 1 | μA | VIN = 3.6 V, VIN = VOUT = VSW, EN = GND | 5 | |
| Input voltage (supply voltage) | VIN | 2 | 6 | V | 4 | ||
| Output voltage range for adjustable voltage | VOUT | 0.6 | V | 4 | |||
| Operating ambient temperature | TA | -40 | 85 | °C | 4 | ||
| Operating junction temperature | TJ | -40 | 125 | °C | 4 | ||
| VIN Input voltage | VIN | -0.3 | 7 | V | 4 | ||
| Voltage at EN, MODE | -0.3 | V | 4 | ||||
| Voltage on SW | -0.3 | 7 | V | 4 | |||
| Maximum operating junction temperature | TJ | -40 | 125 | °C | 4 | ||
| Storage temperature | Tstg | -65 | 150 | °C | 4 | ||
| Junction-to-ambient thermal resistance (DRV WSON) | RθJA | 67.8 | °C/W | DRV [WSON] package | 4 | ||
| Junction-to-case (top) thermal resistance (DRV WSON) | RθJC(top) | 88.5 | °C/W | DRV [WSON] package | 4 | ||
| Junction-to-board thermal resistance (DRV WSON) | RθJB | 37.2 | °C/W | DRV [WSON] package | 4 | ||
| Junction-to-top characterization parameter (DRV WSON) | ψJT | 2 | °C/W | DRV [WSON] package | 4 | ||
| Junction-to-board characterization parameter (DRV WSON) | ψJB | 37.6 | °C/W | DRV [WSON] package | 4 | ||
| Junction-to-case (bottom) thermal resistance (DRV WSON) | RθJC(bot) | 7.9 | °C/W | DRV [WSON] package | 4 |
CAD (KiCad official)
- Symbol:
TPS62260DRVR - Footprint:
Package_SON:WSON-6-1EP_2x2mm_P0.65mm_EP1x1.6mm - 3D model: WSON-6-EP(2x2) (KiCad packages3D, STEP)
- 3D model files:
tps62260drvr-etched.step/tps62260drvr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tps62260drvr.step/tps62260drvr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (39 pp, sha256
d038c06261cfd705, retrieved 2026-09-27, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-4-6(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# TPS62260DRVR
**Texas Instruments** · DC-DC Converters · WSON-6-EP(2x2)
TPS62260DRVR from Texas Instruments, in a WSON-6-EP(2x2). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SW | tri_state | Switch node connected to internal MOSFET switches; connect external inductor between this terminal and the output capacitor for energy transfer and current sensing. |
| 2 | MODE | input | Mode select pin (WSON-only); logic high forces continuous PWM mode at 2.25 MHz, logic low enables power save mode with automatic PFM to PWM transition. |
| 3 | FB | input | Feedback pin for internal output voltage regulation; connect external resistor divider for adjustable output versions or directly to output capacitor for fixed voltage versions. |
| 4 | EN | input | Active-high enable pin; logic low forces device into shutdown mode (<1 µA), logic high enables operation; must be terminated. |
| 5 | VIN | power_in | Input power supply pin; supports 2 V to 6 V range for single Li-ion cells and alkaline batteries. |
| 6 | GND | power_in | Ground reference supply pin. |
| 7 | PAD | power_in | Exposed thermal pad connected to ground; must be soldered to PCB ground plane via multiple vias per SLUA271 for thermal dissipation and mechanical support. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | WSON-6-EP(2x2) |
| Category | Power Management (PMIC) |
| Pins | 7 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VIN Input voltage range | VIN | 2.3 | | 6 | V | | 5 |
| Shutdown current | ISD | | 0.1 | 1 | μA | EN = GND | 5 |
| High level input voltage, EN, MODE | VIH | 1 | | | V | 2 V ≤ VIN ≤ 6 V | 5 |
| Low level input voltage, EN, MODE | VIL | 0 | | 0.4 | V | 2 V ≤ VIN ≤ 6 V | 5 |
| Input bias current, EN, MODE | IIN | | 0.01 | 1 | μA | EN, MODE = GND or VIN | 5 |
| High side MOSFET on-resistance | RDS(on) | | 240 | 480 | mΩ | VIN = VGS = 3.6 V, TA = 25°C | 5 |
| Low side MOSFET on-resistance | RDS(on) | | 185 | 380 | mΩ | VIN = VGS = 3.6 V, TA = 25°C | 5 |
| Forward current limit MOSFET high side and low side | ILIMF | 0.8 | 1 | 1.2 | A | VIN = VGS = 3.6 V | 5 |
| Oscillator frequency | fSW | 2 | 2.25 | 2.5 | MHz | 2 V ≤ VIN ≤ 6 V | 5 |
| Adjustable output voltage range | VOUT | 0.6 | | | V | | 5 |
| Leakage current into SW pin | Ilkg | | 0.1 | 1 | μA | VIN = 3.6 V, VIN = VOUT = VSW, EN = GND | 5 |
| Input voltage (supply voltage) | VIN | 2 | | 6 | V | | 4 |
| Output voltage range for adjustable voltage | VOUT | 0.6 | | | V | | 4 |
| Operating ambient temperature | TA | -40 | | 85 | °C | | 4 |
| Operating junction temperature | TJ | -40 | | 125 | °C | | 4 |
| VIN Input voltage | VIN | -0.3 | | 7 | V | | 4 |
| Voltage at EN, MODE | | -0.3 | | | V | | 4 |
| Voltage on SW | | -0.3 | | 7 | V | | 4 |
| Maximum operating junction temperature | TJ | -40 | | 125 | °C | | 4 |
| Storage temperature | Tstg | -65 | | 150 | °C | | 4 |
| Junction-to-ambient thermal resistance (DRV WSON) | RθJA | | 67.8 | | °C/W | DRV [WSON] package | 4 |
| Junction-to-case (top) thermal resistance (DRV WSON) | RθJC(top) | | 88.5 | | °C/W | DRV [WSON] package | 4 |
| Junction-to-board thermal resistance (DRV WSON) | RθJB | | 37.2 | | °C/W | DRV [WSON] package | 4 |
| Junction-to-top characterization parameter (DRV WSON) | ψJT | | 2 | | °C/W | DRV [WSON] package | 4 |
| Junction-to-board characterization parameter (DRV WSON) | ψJB | | 37.6 | | °C/W | DRV [WSON] package | 4 |
| Junction-to-case (bottom) thermal resistance (DRV WSON) | RθJC(bot) | | 7.9 | | °C/W | DRV [WSON] package | 4 |
## CAD (KiCad official)
- Symbol: `TPS62260DRVR`
- Footprint: `Package_SON:WSON-6-1EP_2x2mm_P0.65mm_EP1x1.6mm`
- 3D model: WSON-6-EP(2x2) (KiCad packages3D, STEP)
- 3D model files: `tps62260drvr-etched.step` / `tps62260drvr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tps62260drvr.step` / `tps62260drvr.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/tps62260) (39 pp, sha256 `d038c06261cfd705`, retrieved 2026-09-27, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/tps62260drvr-datasheet.pdf)