component
TPS62250DRVR
Public Made by Adomby adom
Texas Instruments DC-DC Converters, WSON-6-EP(2x2). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+43@@ -0,0 +1,43 @@+# TPS62250DRVR++**Texas Instruments** · DC-DC Converters · WSON-6-EP(2x2)++TPS62250DRVR from Texas Instruments, in a WSON-6-EP(2x2). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | SW | output | Switch pin connected to the internal MOSFET switches; connect the external inductor between this terminal and the output capacitor. Absolute maximum voltage on SW is -0.3 V to 7 V. |+| 2 | MODE | input | Available only in the SON package: MODE high forces fixed-frequency PWM operation, and MODE low enables Power Save Mode with automatic transition from PFM to PWM. EN and MODE are rated -0.3 V to VIN + 0.3 V, with a maximum of 7 V. |+| 3 | FB | input | Feedback pin for the internal regulation loop; connect the external resistor divider here, or connect it directly to the output capacitor for the fixed-output version. The reference voltage Vref is 600 mV. |+| 4 | EN | input | Enable pin: pulling it low forces shutdown mode and pulling it high enables the device; it must be terminated. EN is rated -0.3 V to VIN + 0.3 V, with a maximum of 7 V, and is valid for 2 V ≤ VIN ≤ 6 V with VIH of 1 V minimum and VIL of 0.4 V maximum. |+| 5 | VIN | power_in | Input supply pin; the recommended supply range is 2 V to 6 V and the absolute maximum input voltage is 7 V. |+| 6 | GND | power_in | Ground supply pin; the datasheet says to connect it to the PowerPAD land and use that pad as the star point for power ground. |+| 7 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | WSON-6-EP(2x2) |+| Category | Power Management (PMIC) |+| Pins | 7 |++## CAD (KiCad official)++- Symbol: `TPS62250DRVR`+- Footprint: `Package_SON:WSON-6-1EP_2x2mm_P0.65mm_EP1x1.6mm`+- 3D model: WSON-6-EP(2x2) (KiCad packages3D, STEP)+- 3D model files: `tps62250drvr-etched.step` / `tps62250drvr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tps62250drvr.step` / `tps62250drvr.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/tps62250) (34 pp, sha256 `79c5c48f91e1e991`, retrieved 2026-10-08, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/tps62250drvr-datasheet.pdf)
page.jsonadded+195@@ -0,0 +1,195 @@+{+ "slug": "tps62250drvr",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments DC-DC Converters, WSON-6-EP(2x2). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "power management (pmic)",+ "tps62250drvr",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "tps62250drvr.kicad_sym",+ "tps62250drvr.kicad_mod",+ "tps62250drvr.glb",+ "tps62250drvr.step",+ "tps62250drvr.lbr",+ "docs/hero.png",+ "docs/tps62250drvr-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html",+ "tps62250drvr-hero.glb",+ "tps62250drvr-hero.overlay.json"+ ],+ "component": {+ "mpn": "TPS62250DRVR",+ "manufacturer": "Texas Instruments",+ "package": "WSON-6-EP(2x2)",+ "pin_count": 7,+ "category": "Power Management (PMIC)",+ "subcategory": "DC-DC Converters",+ "datasheet": "https://www.ti.com/cn/lit/gpn/tps62250",+ "parts": {+ "symbol": "tps62250drvr.kicad_sym",+ "footprint": "tps62250drvr.kicad_mod",+ "model_3d": "tps62250drvr-hero.glb",+ "model_3d_plain": "tps62250drvr.glb",+ "model_3d_step": "tps62250drvr-etched.step",+ "model_3d_step_plain": "tps62250drvr.step",+ "lbr": "tps62250drvr.lbr"+ },+ "distributor_links": {+ "lcsc": "C1848540",+ "digikey": "296-TPS62250DRVRTR-ND",+ "mouser": "595-TPS62250DRVR"+ },+ "distributor_check": {+ "checked_at": "2026-10-08T14:44:23Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": "296-TPS62250DRVRTR-ND",+ "status": "found",+ "lifecycle": "Active"+ },+ "mouser": {+ "pn": "595-TPS62250DRVR",+ "status": "found"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "SW",+ "type": "output",+ "description": "Switch pin connected to the internal MOSFET switches; connect the external inductor between this terminal and the output capacitor. Absolute maximum voltage on SW is -0.3 V to 7 V."+ },+ {+ "number": "2",+ "name": "MODE",+ "type": "input",+ "description": "Available only in the SON package: MODE high forces fixed-frequency PWM operation, and MODE low enables Power Save Mode with automatic transition from PFM to PWM. EN and MODE are rated -0.3 V to VIN + 0.3 V, with a maximum of 7 V."+ },+ {+ "number": "3",+ "name": "FB",+ "type": "input",+ "description": "Feedback pin for the internal regulation loop; connect the external resistor divider here, or connect it directly to the output capacitor for the fixed-output version. The reference voltage Vref is 600 mV."+ },+ {+ "number": "4",+ "name": "EN",+ "type": "input",+ "description": "Enable pin: pulling it low forces shutdown mode and pulling it high enables the device; it must be terminated. EN is rated -0.3 V to VIN + 0.3 V, with a maximum of 7 V, and is valid for 2 V ≤ VIN ≤ 6 V with VIH of 1 V minimum and VIL of 0.4 V maximum."+ },+ {+ "number": "5",+ "name": "VIN",+ "type": "power_in",+ "description": "Input supply pin; the recommended supply range is 2 V to 6 V and the absolute maximum input voltage is 7 V."+ },+ {+ "number": "6",+ "name": "GND",+ "type": "power_in",+ "description": "Ground supply pin; the datasheet says to connect it to the PowerPAD land and use that pad as the star point for power ground."+ },+ {+ "number": "7",+ "name": "EP",+ "type": "passive",+ "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.3",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.3",+ "primary_model": "claude-haiku-5-5",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "extractor flagged: The exposed PowerPAD (thermal pad) on the underside of the WSON package is referenced in the text (p; The datasheet states that the MODE pin is only available on the SON package option. This pinout is f; The pin numbers come from the terminal-function table, which lists the SON 2x2-6 column. The pin typ",+ "exposed pad 7 added from the footprint"+ ],+ "pages_sent": 8,+ "cost_usd": 0.0472,+ "at": "2026-10-08T14:44:06"+ },+ "datasheet": {+ "url": "https://www.ti.com/cn/lit/gpn/tps62250",+ "pages": 34,+ "sha256": "79c5c48f91e1e991",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 7,+ "described": 7,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ },+ "models_3d": [+ {+ "file": "tps62250drvr.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 2,+ 1.98,+ 0.82+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "a159a524ab16d3406353a16f8c20b59f5679eea26e2d41174628288b5b9da702",+ "checked": "2026-10-08",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "tps62250drvr-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 2,+ 1.98,+ 0.82+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "3037a5610cc928b335887e2f0f755654731fad260a0536b6581fb100dba97773",+ "checked": "2026-10-08",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ]+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}