component

TPS622314TDRYRQ1

Public Made by Adom

by adom

Texas Instruments DC-DC Converters, XSON-6(1x1.5). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.

componentpower supply chiptps622314tdryrq1factory-2.0.0extractor-text
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity

3D Model

Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

Datasheet

Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

TPS622314TDRYRQ1

Texas Instruments · DC-DC Converters · XSON-6(1x1.5)

TPS622314TDRYRQ1 from Texas Instruments, in a XSON-6(1x1.5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 MODE input MODE high forces the device into PWM operation, and MODE low enables Power Save Mode with automatic transition from PFM to PWM. The datasheet states that the pin must be held at a defined high or low level and recommends tying it high for noise-sensitive applications.
2 SW output Switch pin connected to the internal MOSFET switches; the inductor must be connected to this terminal. Absolute maximum voltage at SW is -0.3 V to 7 V.
3 VIN power_in Power supply pin; the input voltage range is 2.05 V to 6 V, with absolute maximum -0.3 V to 7 V.
4 GND power_in Ground supply pin for the device, to be connected to the common Power GND node per the layout guidance.
5 EN input Enable pin: pulling it low forces shutdown mode and pulling it high enables the device; the pin must be terminated and its voltage must not exceed VIN + 0.3 V (max 7 V).
6 FB input Feedback pin for the internal regulation loop; connect it directly to the output capacitor, with absolute maximum voltage of -0.3 V to 3.6 V.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package XSON-6(1x1.5)
Category Power Supply Chip
Pins 6

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Voltage at VIN and SW Pin -0.3 7 V 2
Voltage at EN, MODE Pin VI -0.3 V Max printed as VIN +0.3, ≤7 2
Voltage at FB Pin -0.3 3.6 V 2
ESD rating, Human Body Model (HBM) 2 kV Human Body Model (HBM) 2
ESD rating, Charged Device Model (CDM) 1 kV Charged Device Model (CDM) 2
ESD rating, Machine Model (MM) 200 V Machine Model (MM) 2
Maximum operating junction temperature TJ -40 125 °C 2
Storage temperature range Tstg -65 150 °C 2
Power rating, 1x1.5 SON 420 mW TA ≤ 25°C 2
Derating factor, 1x1.5 SON 4.2 mW/°C Above TA = 25°C 2
Junction-to-ambient thermal resistance (1x1.5 SON) RθJA 234 °C/W High-K board, 4 layers per JESD51-7 2
Supply voltage VIN 2.05 6 V TA = –40 to 105°C 3
Effective inductance 2.2 μH 3
Effective capacitance 2 4.7 μF 3
Recommended minimum supply voltage (500 mA) 3 3.6 V 500 mA maximum IOUT; VOUT ≤ VIN -1 V 3
Recommended minimum supply voltage (350 mA) 2.5 2.7 V 350 mA maximum IOUT 3
Recommended minimum supply voltage (60 mA, VOUT ≤ 1.8 V) 2.05 V VOUT ≤ 1.8V; 60 mA maximum output current 3
Operating junction temperature range TJ -40 125 °C 3
Input voltage range VIN 2.05 6 V 4
Operating quiescent current IQ 22 40 μA IOUT = 0 mA, PFM mode enabled (Mode = 0), device not switching 4
Shutdown current ISD 0.1 1 μA EN = GND 4
Undervoltage lockout threshold, falling 1.8 1.9 V Falling 4
Undervoltage lockout threshold, rising 1.9 2.05 V Rising 4
Threshold for detecting high, EN, MODE VIH TH 0.8 1 V 2.05 V ≤ VIN ≤ 6V, rising edge 4
Threshold for detecting low hysteresis, EN, MODE VIL TH HYS 0.4 0.6 V 2.05 V ≤ VIN ≤ 6V, falling edge 4
Input bias current, EN, MODE IIN 0.01 0.5 μA EN, MODE = GND or VIN = 3.6V 4
High side MOSFET on-resistance RDS(ON) 600 850 mΩ VIN = 3.6V, TJmax = 105°C 4
Low side MOSFET on-resistance RDS(ON) 350 480 mΩ VIN = 3.6V, TJmax = 105°C 4
Forward current limit MOSFET high side I high-side LIMF 690 850 1050 mA VIN = 3.6V, open loop 4
Forward current limit MOSFET low side 550 840 1220 mA 4
Leakage current into SW pin ILK_SW 0.1 0.5 μA VIN = VOUT = VSW = 3.6 V, EN = GND 4
Output voltage accuracy (MODE = VIN) VOUT -2 2 % VIN = 3.6V, MODE = VIN, TA = 25°C 4
Output voltage accuracy (full temperature range) VOUT -2.5 2.5 % IOUT = 0 mA, TA = –40°C to 105°C 4

CAD (KiCad official)

  • Symbol: TPS622314TDRYRQ1
  • Footprint: Package_SON:Texas_USON-6_1x1.45mm_P0.5mm_SMD
  • 3D model: XSON-6(1x1.5) (KiCad packages3D, STEP)
  • 3D model files: tps622314tdryrq1-etched.step / tps622314tdryrq1-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tps622314tdryrq1.step / tps622314tdryrq1.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (31 pp, sha256 841c3edc96f6a799, retrieved 2026-10-11, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF