3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownTPS62172QDSGRQ1
Texas Instruments · DC-DC Converters · WSON-8-EP(2x2)
TPS62172QDSGRQ1 from Texas Instruments, in a WSON-8-EP(2x2). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PGND | power_in | Power ground. |
| 2 | VIN | power_in | Supply voltage input, 3V to 17V. |
| 3 | EN | input | Enable input; High enables the device, Low disables it. |
| 4 | AGND | power_in | Analog ground. |
| 5 | FB | input | Voltage feedback input; for fixed output versions (TPS62172-Q1), connect to AGND for improved thermal performance. |
| 6 | VOS | input | Output voltage sense pin for control loop feedback and regulation. |
| 7 | SW | output | Switch node connected to internal MOSFET switches; connect inductor between SW and output capacitor. |
| 8 | PG | tri_state | Power good output, open-drain type requiring pull-up resistor; High = VOUT ready (92-98% nominal), Low = VOUT below regulation. |
| 9 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | WSON-8-EP(2x2) |
| Category | Power Management (PMIC) |
| Pins | 9 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Pin voltage VIN | VIN | -0.3 | 20 | V | 4 | ||
| Pin voltage EN | EN | -0.3 | V | 4 | |||
| Pin voltage SW | SW | -0.3 | V | 4 | |||
| Pin voltage FB, PG, VOS | FB, PG, VOS | -0.3 | 7 | V | 4 | ||
| Power Good sink current | 10 | mA | 4 | ||||
| Operating junction temperature range | TJ | -40 | 150 | °C | 4 | ||
| Storage temperature range | Tstg | -65 | 150 | °C | 4 | ||
| Supply voltage | VIN | 3 | 17 | V | 4 | ||
| Output voltage range | VOUT | 0.9 | 6 | V | 4 | ||
| Operating junction temperature | TJ | -40 | 125 | °C | 4 | ||
| Input voltage range | VIN | 3 | 17 | V | 5 | ||
| Operating quiescent current | IQ | 17 | 30 | µA | EN = High, IOUT = 0 mA, Device not switching | 5 | |
| Shutdown current | ISD | 1.8 | 25 | µA | EN = Low | 5 | |
| Undervoltage lockout threshold, falling input voltage | VUVLO | 2.6 | 2.7 | 2.82 | V | Falling input voltage | 5 |
| High-level input threshold voltage (EN) | VEN_H | 0.9 | V | 5 | |||
| Low-level input threshold voltage (EN) | VEN_L | 0.3 | V | 5 | |||
| Input leakage current (EN) | ILKG_EN | 0.01 | 1 | µA | EN = VIN or GND | 5 | |
| Power Good threshold voltage, rising | VTH_PG | 92 | 95 | 98 | %VOUT | Rising (%VOUT) | 5 |
| Power Good threshold voltage, falling | VTH_PG | 87 | 90 | 93 | %VOUT | Falling (%VOUT) | 5 |
| Power Good output low | VOL_PG | 0.07 | 0.3 | V | IPG = –2 mA | 5 | |
| Input leakage current (PG) | ILKG_PG | 1 | 400 | nA | VPG = 1.8 V | 5 | |
| High-side MOSFET ON-resistance | RDS(ON) | 300 | 600 | mΩ | VIN ≥ 6 V | 5 | |
| High-side MOSFET ON-resistance | RDS(ON) | 430 | mΩ | VIN = 3 V | 5 | ||
| Low-side MOSFET ON-resistance | RDS(ON) | 120 | 200 | mΩ | VIN ≥ 6 V | 5 | |
| Low-side MOSFET ON-resistance | RDS(ON) | 165 | mΩ | VIN = 3 V | 5 | ||
| High-side MOSFET forward current limit | ILIMF | 0.85 | 1.05 | 1.35 | A | VIN = 12 V, TA = 25°C | 5 |
| Feedback voltage accuracy | -3 | 3 | % | PWM Mode operation, VIN ≥ VOUT + 1 V | 5 | ||
| Feedback voltage accuracy | -3.5 | 4 | % | Power Save Mode operation, COUT = 22 µF | 5 | ||
| Thermal resistance, junction-to-ambient | RθJA | 65.5 | °C/W | 4 | |||
| Thermal resistance, junction-to-case (top) | RθJC(top) | 66.4 | °C/W | 4 | |||
| Thermal resistance, junction-to-board | RθJB | 35.5 | °C/W | 4 | |||
| Junction-to-top characterization parameter | ψJT | 1.7 | °C/W | 4 | |||
| Junction-to-board characterization parameter | ψJB | 35.8 | °C/W | 4 | |||
| Thermal resistance, junction-to-case (bottom) | RθJC(bot) | 8.4 | °C/W | 4 |
CAD (KiCad official)
- Symbol:
TPS62172QDSGRQ1 - Footprint:
Package_SON:WSON-8-1EP_2x2mm_P0.5mm_EP0.9x1.6mm - 3D model: WSON-8-EP(2x2) (KiCad packages3D, STEP)
- 3D model files:
tps62172qdsgrq1-etched.step/tps62172qdsgrq1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tps62172qdsgrq1.step/tps62172qdsgrq1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (35 pp, sha256
3f9b42d19d45696e, retrieved 2026-09-26, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-4-6(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).