component
TPS62172DSGR
Public Made by Adomby adom
Texas Instruments DC-DC Converters, WSON-8-EP(2x2). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
page.json+7−4@@ -50,7 +50,7 @@ "number": "3", "name": "EN", "type": "input",- "description": "Enable input; high enables device operation, low disables with typical shutdown current of 1.5 \u00b5A and internal pull-down resistor of approximately 400 k\u03a9."+ "description": "Enable input; high enables device operation, low disables with typical shutdown current of 1.5 µA and internal pull-down resistor of approximately 400 kΩ." }, { "number": "4",@@ -80,13 +80,13 @@ "number": "8", "name": "PG", "type": "tri_state",- "description": "Open-drain power good output indicator; high impedance when VOUT ready (\u226592% nominal regulation), low when below regulation (\u226487% nominal), can sink 2 mA and requires external pull-up resistor."+ "description": "Open-drain power good output indicator; high impedance when VOUT ready (≥92% nominal regulation), low when below regulation (≤87% nominal), can sink 2 mA and requires external pull-up resistor." }, { "number": "9", "name": "Exposed Thermal Pad", "type": "power_in",- "description": "Electrical connection to AGND that must be soldered to printed circuit board for mechanical reliability and thermal dissipation; junction-to-board thermal resistance R\u03b8JB is 15.5 \u00b0C/W per section 7.4."+ "description": "Electrical connection to AGND that must be soldered to printed circuit board for mechanical reliability and thermal dissipation; junction-to-board thermal resistance RθJB is 15.5 °C/W per section 7.4." } ], "provenance": {@@ -164,5 +164,8 @@ "docs/tps62172dsgr-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }