component
TPS62170QDSGTQ1
Public Made by Adomby adom
Texas Instruments DC-DC Converters, WSON-8-EP(2x2). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownTPS62170QDSGTQ1
Texas Instruments · DC-DC Converters · WSON-8-EP(2x2)
TPS62170QDSGTQ1 from Texas Instruments, in a WSON-8-EP(2x2). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PGND | power_in | Power ground connection |
| 2 | VIN | power_in | Supply voltage input; absolute maximum rating 20V; recommended operating range 3V to 17V |
| 3 | EN | input | Enable input; High = enabled, Low = disabled; voltage range -0.3V to VIN+0.3V |
| 4 | AGND | power_in | Analog ground reference; must also be soldered to exposed thermal pad for proper dissipation and mechanical reliability |
| 5 | FB | input | Feedback input for adjustable output version; connect resistive voltage divider to set output voltage; for fixed output versions connect to AGND for improved thermal performance; voltage range -0.3V to 7V |
| 6 | VOS | input | Output voltage sense input for control loop feedback; voltage range -0.3V to 7V |
| 7 | SW | output | Internal MOSFET switch node; connect inductor to output capacitor for DC/DC conversion; voltage range -0.3V to VIN+0.3V |
| 8 | PG | tri_state | Power good open-drain output; High = VOUT ready, Low = VOUT below nominal regulation; requires external pull-up resistor; goes high-impedance when device switched off; voltage range -0.3V to 7V |
| 9 | Exposed Thermal Pad | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | WSON-8-EP(2x2) |
| Category | Power Management (PMIC) |
| Pins | 9 |
CAD (KiCad official)
- Symbol:
TPS62170QDSGTQ1 - Footprint:
Package_SON:WSON-8-1EP_2x2mm_P0.5mm_EP0.9x1.6mm - 3D model: WSON-8-EP(2x2) (KiCad packages3D, STEP)
- 3D model files:
tps62170qdsgtq1-etched.step/tps62170qdsgtq1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tps62170qdsgtq1.step/tps62170qdsgtq1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (35 pp, sha256
3f9b42d19d45696e, retrieved 2026-10-03, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).