component
TPS62162DSGT
Public Made by Adomby adom
Texas Instruments DC-DC Converters, WSON-8-EP(2x2). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownTPS62162DSGT
Texas Instruments · DC-DC Converters · WSON-8-EP(2x2)
TPS62162DSGT from Texas Instruments, in a WSON-8-EP(2x2). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PGND | power_in | Power ground providing return path for switching and power stage currents. |
| 2 | VIN | power_in | Supply voltage input; operational range 3V to 17V. |
| 3 | EN | input | Enable input; logic high enables operation, logic low disables device with approximately 1.5µA shutdown current. |
| 4 | AGND | power_in | Analog ground node providing reference for control and feedback circuitry; connected to PGND and exposed thermal pad. |
| 5 | FB | input | Feedback input; on fixed 3.3V TPS62162, internally pulled down and recommended to connect to AGND for improved thermal performance. |
| 6 | VOS | input | Output voltage sense input providing feedback signal to the control loop and internal compensation network. |
| 7 | SW | output | Switch node output connected to internal MOSFET switches; inductor connected between SW and output capacitor. |
| 8 | PG | tri_state | Open-drain power good output; high when VOUT ≥92% nominal, low when VOUT below nominal regulation, goes high impedance when device is switched off. |
| 9 | Exposed Thermal Pad | power_in | Exposed thermal pad electrically connected to AGND; must be soldered to circuit board for proper power dissipation and mechanical reliability. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | WSON-8-EP(2x2) |
| Category | Power Management (PMIC) |
| Pins | 9 |
CAD (KiCad official)
- Symbol:
TPS62162DSGT - Footprint:
Package_SON:WSON-8-1EP_2x2mm_P0.5mm_EP0.9x1.6mm - 3D model: WSON-8-EP(2x2) (KiCad packages3D, STEP)
- 3D model files:
tps62162dsgt-etched.step/tps62162dsgt-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tps62162dsgt.step/tps62162dsgt.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (42 pp, sha256
729fe659c0bb2b33, retrieved 2026-09-26, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-4-6(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).