main
Download ZIP Propose a change
Made with KiCad 10.0 · needs KiCad 10.0 or later to open · KiCad file format 20260206
Name Last commit message Last updated
docs tps62161dsgr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers tps62161dsgr: viewers · Ray
package.json tps62161dsgr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
page.json tps62161dsgr: specified limits as data (metadata.characteristics, 19 rows from the datasheet) · Ray
README.md tps62161dsgr: specified limits as data (metadata.characteristics, 19 rows from the datasheet) · Ray
tps62161dsgr-etched.fit.json tps62161dsgr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
tps62161dsgr-etched.glb tps62161dsgr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
tps62161dsgr-etched.step tps62161dsgr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
tps62161dsgr.glb Publish 0.1.0 · Ray
tps62161dsgr.kicad_mod Publish 0.1.0 · Ray
tps62161dsgr.kicad_sym Publish 0.1.0 · Ray
tps62161dsgr.lbr Publish 0.1.0 · Ray
tps62161dsgr.step Publish 0.1.0 · Ray

TPS62161DSGR

Texas Instruments · DC-DC Converters · WSON-8-EP(2x2)

TPS62161DSGR from Texas Instruments, in a WSON-8-EP(2x2). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 PGND power_in Power ground connection for output stage return path.
2 VIN power_in Supply voltage input, 3V to 17V range.
3 EN input Enable input; High level enables device operation, Low forces shutdown with 1.5 µA typical quiescent current.
4 AGND power_in Analog ground reference for control and feedback circuits.
5 FB input Voltage feedback input regulated to 0.8V for adjustable versions; for fixed output version TPS62161, connect to AGND for improved thermal performance.
6 VOS input Output voltage sense input for control loop compensation; connect to actual output voltage at capacitor.
7 SW output Switch node connected to internal MOSFET switches; inductor and output capacitor connect here.
8 PG tri_state Open-drain power good output; pulls low (sink ≤2mA to 0.07-0.3V) when VOUT below nominal, high impedance when VOUT ready.
9 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package WSON-8-EP(2x2)
Category Power Management (PMIC)
Pins 9

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input leakage current (PG) ILKG_PG 1 400 nA VPG = 1.8 V 7
High-side MOSFET ON-resistance RDS(ON) 300 600 mΩ VIN ≥ 6 V 7
Initial output voltage accuracy (PWM mode) -3 3 % PWM mode operation, VIN ≥ VOUT + 1 V 7
Pin voltage range VIN VIN -0.3 20 V 5
Pin voltage range EN, SW (DC) EN, SW -0.3 V DC; upper limit printed as VIN + 0.3 5
Pin voltage range SW (AC) SW -2 24.5 V less than 10ns, while switching 5
Pin voltage range FB, PG, VOS FB, PG, VOS -0.3 7 V 5
Power good sink current PG 10 mA 5
Operating junction temperature TJ -40 150 °C 5
Storage temperature Tstg -65 150 °C 5
Supply voltage VIN 3 17 V 5
Output voltage VOUT 0.9 6 V 5
Operating junction temperature TJ -40 125 °C 5
Junction-to-ambient thermal resistance (DSG WSON) RθJA 61.8 °C/W 5
Junction-to-case (top) thermal resistance (DSG WSON) RθJC(top) 61.3 °C/W 5
Junction-to-board thermal resistance (DSG WSON) RθJB 15.5 °C/W 5
Junction-to-top characterization parameter (DSG WSON) ψJT 0.4 °C/W 5
Junction-to-board characterization parameter (DSG WSON) ψJB 15.4 °C/W 5
Junction-to-case (bottom) thermal resistance (DSG WSON) RθJC(bot) 8.6 °C/W 5

CAD (KiCad official)

  • Symbol: TPS62161DSGR
  • Footprint: Package_SON:WSON-8-1EP_2x2mm_P0.5mm_EP0.9x1.6mm
  • 3D model: WSON-8-EP(2x2) (KiCad packages3D, STEP)
  • 3D model files: tps62161dsgr-etched.step / tps62161dsgr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tps62161dsgr.step / tps62161dsgr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (42 pp, sha256 729fe659c0bb2b33, retrieved 2026-09-27, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-4-6 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF