component
TPS62150AQRGTRQ1
Public Made by Adomby adom
Texas Instruments DC-DC Converters, VQFN-16-EP(3x3). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+54@@ -0,0 +1,54 @@+# TPS62150AQRGTRQ1++**Texas Instruments** · DC-DC Converters · VQFN-16-EP(3x3)++TPS62150AQRGTRQ1 from Texas Instruments, in a VQFN-16-EP(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | SW | output | Switch node connected to internal MOSFET switches; connect inductor between SW and output capacitor. |+| 2 | SW | output | Switch node connected to internal MOSFET switches; connect inductor between SW and output capacitor. |+| 3 | SW | output | Switch node connected to internal MOSFET switches; connect inductor between SW and output capacitor. |+| 4 | PG | tri_state | Output power good indicator with open-drain output (High = VOUT ready, Low = VOUT below nominal regulation; requires pull-up resistor). |+| 5 | FB | input | Voltage feedback input for adjustable version; connect resistive voltage divider to this pin for output voltage setting. |+| 6 | AGND | power_in | Analog ground; must be connected directly to exposed thermal pad and common ground plane. |+| 7 | FSW | input | Switching frequency select input with internal pull-down (Low = 2.5MHz, High = 1.25MHz for typical operation). |+| 8 | DEF | input | Output voltage scaling control input with internal pull-down (Low = nominal, High = nominal + 5%). |+| 9 | SS/TR | input | Soft-start and tracking input; external capacitor sets internal voltage reference rise time for tracking and sequencing. |+| 10 | AVIN | power_in | Analog supply voltage for control circuitry (3V to 17V); must connect to same source as PVIN. |+| 11 | PVIN | power_in | Supply voltage for power stage (3V to 17V); must connect to same source as AVIN. |+| 12 | PVIN | power_in | Supply voltage for power stage (3V to 17V); must connect to same source as AVIN. |+| 13 | EN | input | Enable control input with internal pull-down (High = enabled, Low = disabled). |+| 14 | VOS | input | Output voltage sense pin for control loop feedback connection. |+| 15 | PGND | power_in | Power ground; must be connected directly to exposed thermal pad and common ground plane. |+| 16 | PGND | power_in | Power ground; must be connected directly to exposed thermal pad and common ground plane. |+| 17 | Exposed Thermal Pad | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | VQFN-16-EP(3x3) |+| Category | Power Management (PMIC) |+| Pins | 17 |++## CAD (KiCad official)++- Symbol: `TPS62150AQRGTRQ1`+- Footprint: `Package_DFN_QFN:QFN-16-1EP_3x3mm_P0.5mm_EP1.7x1.7mm`+- 3D model: VQFN-16-EP(3x3) (KiCad packages3D, STEP)+- 3D model files: `tps62150aqrgtrq1-etched.step` / `tps62150aqrgtrq1-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tps62150aqrgtrq1.step` / `tps62150aqrgtrq1.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/tps62153a-q1) (40 pp, sha256 `e6f7e40302057bc1`, retrieved 2026-10-07, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/tps62150aqrgtrq1-datasheet.pdf)
page.jsonadded+255@@ -0,0 +1,255 @@+{+ "slug": "tps62150aqrgtrq1",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments DC-DC Converters, VQFN-16-EP(3x3). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "power management (pmic)",+ "tps62150aqrgtrq1",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "tps62150aqrgtrq1.kicad_sym",+ "tps62150aqrgtrq1.kicad_mod",+ "tps62150aqrgtrq1.glb",+ "tps62150aqrgtrq1.step",+ "tps62150aqrgtrq1.lbr",+ "docs/hero.png",+ "docs/tps62150aqrgtrq1-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html",+ "tps62150aqrgtrq1-hero.glb",+ "tps62150aqrgtrq1-hero.overlay.json"+ ],+ "component": {+ "mpn": "TPS62150AQRGTRQ1",+ "manufacturer": "Texas Instruments",+ "package": "VQFN-16-EP(3x3)",+ "pin_count": 17,+ "category": "Power Management (PMIC)",+ "subcategory": "DC-DC Converters",+ "datasheet": "https://www.ti.com/cn/lit/gpn/tps62153a-q1",+ "parts": {+ "symbol": "tps62150aqrgtrq1.kicad_sym",+ "footprint": "tps62150aqrgtrq1.kicad_mod",+ "model_3d": "tps62150aqrgtrq1-hero.glb",+ "model_3d_plain": "tps62150aqrgtrq1.glb",+ "model_3d_step": "tps62150aqrgtrq1-etched.step",+ "model_3d_step_plain": "tps62150aqrgtrq1.step",+ "lbr": "tps62150aqrgtrq1.lbr"+ },+ "distributor_links": {+ "lcsc": "C2868733",+ "digikey": "296-40837-2-ND",+ "mouser": "595-TPS62150AQRGTRQ1"+ },+ "distributor_check": {+ "checked_at": "2026-10-07T07:26:01Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": "296-40837-2-ND",+ "status": "found",+ "lifecycle": "Active"+ },+ "mouser": {+ "pn": "595-TPS62150AQRGTRQ1",+ "status": "found"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "SW",+ "type": "output",+ "description": "Switch node connected to internal MOSFET switches; connect inductor between SW and output capacitor."+ },+ {+ "number": "2",+ "name": "SW",+ "type": "output",+ "description": "Switch node connected to internal MOSFET switches; connect inductor between SW and output capacitor."+ },+ {+ "number": "3",+ "name": "SW",+ "type": "output",+ "description": "Switch node connected to internal MOSFET switches; connect inductor between SW and output capacitor."+ },+ {+ "number": "4",+ "name": "PG",+ "type": "tri_state",+ "description": "Output power good indicator with open-drain output (High = VOUT ready, Low = VOUT below nominal regulation; requires pull-up resistor)."+ },+ {+ "number": "5",+ "name": "FB",+ "type": "input",+ "description": "Voltage feedback input for adjustable version; connect resistive voltage divider to this pin for output voltage setting."+ },+ {+ "number": "6",+ "name": "AGND",+ "type": "power_in",+ "description": "Analog ground; must be connected directly to exposed thermal pad and common ground plane."+ },+ {+ "number": "7",+ "name": "FSW",+ "type": "input",+ "description": "Switching frequency select input with internal pull-down (Low = 2.5MHz, High = 1.25MHz for typical operation)."+ },+ {+ "number": "8",+ "name": "DEF",+ "type": "input",+ "description": "Output voltage scaling control input with internal pull-down (Low = nominal, High = nominal + 5%)."+ },+ {+ "number": "9",+ "name": "SS/TR",+ "type": "input",+ "description": "Soft-start and tracking input; external capacitor sets internal voltage reference rise time for tracking and sequencing."+ },+ {+ "number": "10",+ "name": "AVIN",+ "type": "power_in",+ "description": "Analog supply voltage for control circuitry (3V to 17V); must connect to same source as PVIN."+ },+ {+ "number": "11",+ "name": "PVIN",+ "type": "power_in",+ "description": "Supply voltage for power stage (3V to 17V); must connect to same source as AVIN."+ },+ {+ "number": "12",+ "name": "PVIN",+ "type": "power_in",+ "description": "Supply voltage for power stage (3V to 17V); must connect to same source as AVIN."+ },+ {+ "number": "13",+ "name": "EN",+ "type": "input",+ "description": "Enable control input with internal pull-down (High = enabled, Low = disabled)."+ },+ {+ "number": "14",+ "name": "VOS",+ "type": "input",+ "description": "Output voltage sense pin for control loop feedback connection."+ },+ {+ "number": "15",+ "name": "PGND",+ "type": "power_in",+ "description": "Power ground; must be connected directly to exposed thermal pad and common ground plane."+ },+ {+ "number": "16",+ "name": "PGND",+ "type": "power_in",+ "description": "Power ground; must be connected directly to exposed thermal pad and common ground plane."+ },+ {+ "number": "17",+ "name": "Exposed Thermal Pad",+ "type": "passive",+ "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.3",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.3",+ "primary_model": "claude-haiku-4-5-20251001",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "extractor flagged: Exposed thermal pad mentioned in pin configuration section but not formally numbered in the pin func",+ "exposed pad 17 added from the footprint"+ ],+ "pages_sent": 9,+ "cost_usd": 0.1318,+ "at": "2026-10-07T07:25:43"+ },+ "datasheet": {+ "url": "https://www.ti.com/cn/lit/gpn/tps62153a-q1",+ "pages": 40,+ "sha256": "e6f7e40302057bc1",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 17,+ "described": 17,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ },+ "models_3d": [+ {+ "file": "tps62150aqrgtrq1.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 3,+ 3,+ 0.785+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "3eb81ffac423a66cdcfead8efe56401da171edaf1f2257049aad7b2d3900f6c8",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "tps62150aqrgtrq1-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 3,+ 3,+ 0.785+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "24d31c537c502ea78e53ec0c8686ab0d4273f91968c3e7cdd8c6fe0d3c0a3132",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ]+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}