← Commit history

Initial commit: component/tps62130argtr

Ray ·829b029e7b ·
2 files changed +248
README.mdadded+53
@@ -0,0 +1,53 @@+# TPS62130ARGTR++**Texas Instruments** · DC-DC Converters · QFN-16-EP(3x3)++TPS62130ARGTR from Texas Instruments, in a QFN-16-EP(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | SW | output | Switch node connected to internal MOSFET switches; connect inductor between this node and output capacitor. |+| 2 | SW | output | Switch node connected to internal MOSFET switches; connect inductor between this node and output capacitor. |+| 3 | SW | output | Switch node connected to internal MOSFET switches; connect inductor between this node and output capacitor. |+| 4 | PG | tri_state | Open-drain power-good output (High at 92%-98% nominal indicates VOUT ready, Low indicates VOUT below regulation); requires pullup resistor. |+| 5 | FB | input | Feedback voltage input (nominal 0.8 V) for adjustable output version; connect resistive divider to program output voltage between 0.9 V and 6 V. |+| 6 | AGND | power_in | Analog ground must be connected directly to exposed thermal pad and common ground plane. |+| 7 | FSW | input | Switching frequency select input with internal ~400 kΩ pulldown; Low selects ~2.5 MHz, High selects ~1.25 MHz typical operation. |+| 8 | DEF | input | Output voltage scaling input with internal ~400 kΩ pulldown; Low = nominal voltage, High = nominal voltage plus 5%. |+| 9 | SS/TR | input | Soft-start/tracking input with 2.5 µA source current for external capacitor to set output voltage ramp rate and enable voltage tracking. |+| 10 | AVIN | power_in | Analog supply voltage input (3 V to 17 V recommended); must be connected to same source as PVIN with 0.1 µF bypass capacitor to AGND. |+| 11 | PVIN | power_in | Power stage supply voltage input (3 V to 17 V recommended); must be connected to same source as AVIN with 10 µF decoupling capacitor. |+| 12 | PVIN | power_in | Power stage supply voltage input (3 V to 17 V recommended); must be connected to same source as AVIN with 10 µF decoupling capacitor. |+| 13 | EN | input | Enable input with internal ~400 kΩ pulldown; High enables device operation, Low forces shutdown with <2 µA shutdown current (ISD typical 1.5 µA). |+| 14 | VOS | input | Output voltage sense input providing feedback voltage to control loop circuitry; must connect directly to VOUT at output capacitor. |+| 15 | PGND | power_in | Power ground must be connected directly to exposed thermal pad and common ground plane. |+| 16 | PGND | power_in | Power ground must be connected directly to exposed thermal pad and common ground plane. |+| 17 | Exposed Thermal Pad | passive | Thermal and mechanical connection point soldered to PCB; must be connected to AGND (pin 6), PGND (pins 15-16), and common ground plane for proper power dissipation and mechanical reliability. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | QFN-16-EP(3x3) |+| Category | Power Management (PMIC) |+| Pins | 17 |++## CAD (KiCad official)++- Symbol: `TPS62130ARGTR`+- Footprint: `Package_DFN_QFN:QFN-16-1EP_3x3mm_P0.5mm_EP1.7x1.7mm`+- 3D model: QFN-16-EP(3x3) (KiCad packages3D, STEP)+- 3D model files: `tps62130argtr-etched.step` / `tps62130argtr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tps62130argtr.step` / `tps62130argtr.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/tps62130a.pdf) (43 pp, sha256 `f9b1af285622c0cf`, retrieved 2026-09-22, tier: manufacturer)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/tps62130argtr-datasheet.pdf)
page.jsonadded+195
@@ -0,0 +1,195 @@+{+  "slug": "tps62130argtr",+  "version": "0.1.0",+  "type": "component",+  "description": "Texas Instruments DC-DC Converters, QFN-16-EP(3x3). Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "power management (pmic)",+    "tps62130argtr",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "tps62130argtr.kicad_sym",+    "tps62130argtr.kicad_mod",+    "tps62130argtr.glb",+    "tps62130argtr.step",+    "tps62130argtr.lbr",+    "docs/hero.png",+    "docs/tps62130argtr-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "TPS62130ARGTR",+    "manufacturer": "Texas Instruments",+    "package": "QFN-16-EP(3x3)",+    "pin_count": 17,+    "category": "Power Management (PMIC)",+    "subcategory": "DC-DC Converters",+    "datasheet": "https://www.ti.com/lit/ds/symlink/tps62130a.pdf",+    "parts": {+      "symbol": "tps62130argtr.kicad_sym",+      "footprint": "tps62130argtr.kicad_mod",+      "model_3d": "tps62130argtr-etched.glb",+      "model_3d_plain": "tps62130argtr.glb",+      "model_3d_step": "tps62130argtr-etched.step",+      "model_3d_step_plain": "tps62130argtr.step",+      "lbr": "tps62130argtr.lbr"+    },+    "distributor_links": {+      "lcsc": "C337502"+    },+    "pins": [+      {+        "number": "1",+        "name": "SW",+        "type": "output",+        "description": "Switch node connected to internal MOSFET switches; connect inductor between this node and output capacitor."+      },+      {+        "number": "2",+        "name": "SW",+        "type": "output",+        "description": "Switch node connected to internal MOSFET switches; connect inductor between this node and output capacitor."+      },+      {+        "number": "3",+        "name": "SW",+        "type": "output",+        "description": "Switch node connected to internal MOSFET switches; connect inductor between this node and output capacitor."+      },+      {+        "number": "4",+        "name": "PG",+        "type": "tri_state",+        "description": "Open-drain power-good output (High at 92%-98% nominal indicates VOUT ready, Low indicates VOUT below regulation); requires pullup resistor."+      },+      {+        "number": "5",+        "name": "FB",+        "type": "input",+        "description": "Feedback voltage input (nominal 0.8 V) for adjustable output version; connect resistive divider to program output voltage between 0.9 V and 6 V."+      },+      {+        "number": "6",+        "name": "AGND",+        "type": "power_in",+        "description": "Analog ground must be connected directly to exposed thermal pad and common ground plane."+      },+      {+        "number": "7",+        "name": "FSW",+        "type": "input",+        "description": "Switching frequency select input with internal ~400 kΩ pulldown; Low selects ~2.5 MHz, High selects ~1.25 MHz typical operation."+      },+      {+        "number": "8",+        "name": "DEF",+        "type": "input",+        "description": "Output voltage scaling input with internal ~400 kΩ pulldown; Low = nominal voltage, High = nominal voltage plus 5%."+      },+      {+        "number": "9",+        "name": "SS/TR",+        "type": "input",+        "description": "Soft-start/tracking input with 2.5 µA source current for external capacitor to set output voltage ramp rate and enable voltage tracking."+      },+      {+        "number": "10",+        "name": "AVIN",+        "type": "power_in",+        "description": "Analog supply voltage input (3 V to 17 V recommended); must be connected to same source as PVIN with 0.1 µF bypass capacitor to AGND."+      },+      {+        "number": "11",+        "name": "PVIN",+        "type": "power_in",+        "description": "Power stage supply voltage input (3 V to 17 V recommended); must be connected to same source as AVIN with 10 µF decoupling capacitor."+      },+      {+        "number": "12",+        "name": "PVIN",+        "type": "power_in",+        "description": "Power stage supply voltage input (3 V to 17 V recommended); must be connected to same source as AVIN with 10 µF decoupling capacitor."+      },+      {+        "number": "13",+        "name": "EN",+        "type": "input",+        "description": "Enable input with internal ~400 kΩ pulldown; High enables device operation, Low forces shutdown with <2 µA shutdown current (ISD typical 1.5 µA)."+      },+      {+        "number": "14",+        "name": "VOS",+        "type": "input",+        "description": "Output voltage sense input providing feedback voltage to control loop circuitry; must connect directly to VOUT at output capacitor."+      },+      {+        "number": "15",+        "name": "PGND",+        "type": "power_in",+        "description": "Power ground must be connected directly to exposed thermal pad and common ground plane."+      },+      {+        "number": "16",+        "name": "PGND",+        "type": "power_in",+        "description": "Power ground must be connected directly to exposed thermal pad and common ground plane."+      },+      {+        "number": "17",+        "name": "Exposed Thermal Pad",+        "type": "passive",+        "description": "Thermal and mechanical connection point soldered to PCB; must be connected to AGND (pin 6), PGND (pins 15-16), and common ground plane for proper power dissipation and mechanical reliability."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-5",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [],+        "pages_sent": 43,+        "cost_usd": 0.4567,+        "at": "2026-09-22T22:31:43"+      },+      "datasheet": {+        "url": "https://www.ti.com/lit/ds/symlink/tps62130a.pdf",+        "pages": 43,+        "sha256": "f9b1af285622c0cf",+        "source_tier": "mfr"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 17,+        "described": 17,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file