component
TPS62081DSGR
Public Made by Adomby adom
Texas Instruments DC-DC Converters, WSON-8-EP(2x2). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownTPS62081DSGR
Texas Instruments · DC-DC Converters · WSON-8-EP(2x2)
TPS62081DSGR from Texas Instruments, in a WSON-8-EP(2x2). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | EN | input | Device enable logic input; logic HIGH enables the device, logic LOW disables the device and enters shutdown mode; do not leave floating. |
| 2 | GND | power_in | Power and signal ground. |
| 3 | MODE | input | Snooze mode enable logic input; logic HIGH enables snooze mode, logic LOW disables snooze mode; do not leave floating. |
| 4 | FB | input | Feedback pin for the internal control loop; must be left floating or connected to GND for fixed output versions. |
| 5 | VOS | input | Output voltage sense pin for the internal control loop; must be connected to the output voltage. |
| 6 | PG | tri_state | Power good open drain output; pulled low when output voltage is below regulation limits; can be left floating if not used. |
| 7 | SW | output | Switch pin connected to the internal MOSFET switches and inductor terminal; connect the output filter inductor here. |
| 8 | VIN | power_in | Power supply voltage input. |
| 9 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | WSON-8-EP(2x2) |
| Category | Power Management (PMIC) |
| Pins | 9 |
CAD (KiCad official)
- Symbol:
TPS62081DSGR - Footprint:
Package_SON:WSON-8-1EP_2x2mm_P0.5mm_EP0.9x1.6mm - 3D model: WSON-8-EP(2x2) (KiCad packages3D, STEP)
- 3D model files:
tps62081dsgr-etched.step/tps62081dsgr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tps62081dsgr.step/tps62081dsgr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (30 pp, sha256
e385f63908203e9d, retrieved 2026-10-03, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).