component
TPS62067DSGR
Public Made by Adomby adom
Texas Instruments DC-DC Converters, WSON-8-EP(2x2). Datasheet-verified pinout, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+46@@ -0,0 +1,46 @@+# TPS62067DSGR++**Texas Instruments** · DC-DC Converters · WSON-8-EP(2x2)++TPS62067DSGR from Texas Instruments, in a WSON-8-EP(2x2). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | PGND | power_in | GND supply pin for the output stage power switching circuit. |+| 2 | SW | output | Switch pin connected to internal MOSFET switches operating at 3MHz; connect external inductor between this terminal and output capacitor. |+| 3 | AGND | power_in | Analog GND supply pin for the control circuit. |+| 4 | FB | input | Feedback pin for internal regulation loop; connect external resistor divider to set output voltage (0.8V to VIN) or connect directly to output capacitor for fixed voltage option. |+| 5 | EN | input | Enable pin that controls device operation; low forces shutdown mode with <1μA standby current and output capacitor discharge, high enables normal operation. |+| 6 | PG | tri_state | Power Good open-drain output pin; provides logic low when feedback voltage below 90% nominal or when EN is low, logic high when feedback voltage above 95% nominal with 5μs internal delay. |+| 7 | AVIN | power_in | Analog VIN power supply pin for control circuit; must be connected to PVIN and input capacitor with 2.9V to 6V input range. |+| 8 | PVIN | power_in | VIN power supply pin for output stage; input voltage range 2.9V to 6V supporting up to 2A output current. |+| 9 | PowerPAD | power_in | Exposed thermal pad for device GND connection; must be soldered to PCB land pattern for proper thermal dissipation (RθJA 65.3°C/W) and mechanical performance. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | WSON-8-EP(2x2) |+| Category | Power Management (PMIC) |+| Pins | 9 |++## CAD (KiCad official)++- Symbol: `TPS62067DSGR`+- Footprint: `Package_SON:WSON-8-1EP_2x2mm_P0.5mm_EP0.9x1.6mm`+- 3D model: WSON-8-EP(2x2) (KiCad packages3D, STEP)+- 3D model files: `tps62067dsgr-etched.step` / `tps62067dsgr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tps62067dsgr.step` / `tps62067dsgr.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/tps62067) (30 pp, sha256 `f9812a26ed207003`, retrieved 2026-09-23, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/tps62067dsgr-datasheet.pdf)
page.jsonadded+149@@ -0,0 +1,149 @@+{+ "slug": "tps62067dsgr",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments DC-DC Converters, WSON-8-EP(2x2). Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "power management (pmic)",+ "tps62067dsgr",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "tps62067dsgr.kicad_sym",+ "tps62067dsgr.kicad_mod",+ "tps62067dsgr.glb",+ "tps62067dsgr.step",+ "tps62067dsgr.lbr",+ "docs/hero.png",+ "docs/tps62067dsgr-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "component": {+ "mpn": "TPS62067DSGR",+ "manufacturer": "Texas Instruments",+ "package": "WSON-8-EP(2x2)",+ "pin_count": 9,+ "category": "Power Management (PMIC)",+ "subcategory": "DC-DC Converters",+ "datasheet": "https://www.ti.com/cn/lit/gpn/tps62067",+ "parts": {+ "symbol": "tps62067dsgr.kicad_sym",+ "footprint": "tps62067dsgr.kicad_mod",+ "model_3d": "tps62067dsgr-etched.glb",+ "model_3d_plain": "tps62067dsgr.glb",+ "model_3d_step": "tps62067dsgr-etched.step",+ "model_3d_step_plain": "tps62067dsgr.step",+ "lbr": "tps62067dsgr.lbr"+ },+ "distributor_links": {+ "lcsc": "C7098"+ },+ "pins": [+ {+ "number": "1",+ "name": "PGND",+ "type": "power_in",+ "description": "GND supply pin for the output stage power switching circuit."+ },+ {+ "number": "2",+ "name": "SW",+ "type": "output",+ "description": "Switch pin connected to internal MOSFET switches operating at 3MHz; connect external inductor between this terminal and output capacitor."+ },+ {+ "number": "3",+ "name": "AGND",+ "type": "power_in",+ "description": "Analog GND supply pin for the control circuit."+ },+ {+ "number": "4",+ "name": "FB",+ "type": "input",+ "description": "Feedback pin for internal regulation loop; connect external resistor divider to set output voltage (0.8V to VIN) or connect directly to output capacitor for fixed voltage option."+ },+ {+ "number": "5",+ "name": "EN",+ "type": "input",+ "description": "Enable pin that controls device operation; low forces shutdown mode with <1μA standby current and output capacitor discharge, high enables normal operation."+ },+ {+ "number": "6",+ "name": "PG",+ "type": "tri_state",+ "description": "Power Good open-drain output pin; provides logic low when feedback voltage below 90% nominal or when EN is low, logic high when feedback voltage above 95% nominal with 5μs internal delay."+ },+ {+ "number": "7",+ "name": "AVIN",+ "type": "power_in",+ "description": "Analog VIN power supply pin for control circuit; must be connected to PVIN and input capacitor with 2.9V to 6V input range."+ },+ {+ "number": "8",+ "name": "PVIN",+ "type": "power_in",+ "description": "VIN power supply pin for output stage; input voltage range 2.9V to 6V supporting up to 2A output current."+ },+ {+ "number": "9",+ "name": "PowerPAD",+ "type": "power_in",+ "description": "Exposed thermal pad for device GND connection; must be soldered to PCB land pattern for proper thermal dissipation (RθJA 65.3°C/W) and mechanical performance."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.2",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.2",+ "primary_model": "claude-haiku-4-5-20251001",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "extractor flagged: PowerPAD (thermal exposed pad) is listed in Table 6-1 without an explicit pin number; pin number 9 i"+ ],+ "pages_sent": 30,+ "cost_usd": 0.3425,+ "at": "2026-09-23T23:52:16"+ },+ "datasheet": {+ "url": "https://www.ti.com/cn/lit/gpn/tps62067",+ "pages": 30,+ "sha256": "f9812a26ed207003",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 9,+ "described": 9,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}