Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

TPS62065DSGR

Texas Instruments · DC-DC Converters · WSON-8-EP(2x2)

TPS62065DSGR from Texas Instruments, in a WSON-8-EP(2x2). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 PGND power_in Power ground supply pin for the output stage; must be soldered to PCB ground plane for thermal and mechanical performance.
2 SW output Switch pin connected to internal high-side and low-side MOSFET switches; connect external inductor between this pin and the output capacitor.
3 AGND power_in Analog ground supply pin for the control circuit; must be connected to PGND through a star point to minimize ground noise effects on the regulation loop.
4 FB input Feedback pin for the internal regulation loop; connect external resistor divider network to set output voltage, or connect directly to output capacitor for fixed voltage option.
5 EN input Enable pin; pulling low forces device into shutdown mode with less than 1 µA current, pulling high enables normal operation; pin must be terminated.
6 MODE input MODE pin for TPS62065; pulling high forces fixed frequency PWM mode, pulling low enables power save mode with automatic PFM/PWM transition; pin must be terminated.
7 AVIN power_in Analog power supply for the control circuit over input voltage range 2.9V to 6V; must be connected to PVIN and input capacitor.
8 PVIN power_in Power supply pin for the output stage over input voltage range 2.9V to 6V; supports maximum 2A output current with internal 3 MHz switching frequency.
9 PowerPAD passive Exposed thermal pad for heat dissipation from the IC; must be soldered to the PCB ground plane with via connections for proper thermal performance.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package WSON-8-EP(2x2)
Category Power Management (PMIC)
Pins 9

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
AVIN, PVIN supply voltage AVIN, PVIN 2.9 6 V 4
Output current capability 2000 mA 4
Output voltage range for adjustable voltage 0.8 V 4
Effective inductance L 0.7 1 1.6 µH 4
Effective output capacitance COUT 4.5 10 22 µF 4
Operating junction temperature TJ -40 125 °C 4
AVIN, PVIN voltage -0.3 7 V Over operating free-air temperature range 4
EN, MODE, PG, FB voltage -0.3 V Over operating free-air temperature range 4
SW voltage -0.3 7 V Over operating free-air temperature range 4
Junction temperature TJ -40 125 °C Over operating free-air temperature range 4
Storage temperature Tstg -65 150 °C Over operating free-air temperature range 4
Input voltage range VIN 2.9 6 V 5
Shutdown current ISD 0.1 1 μA EN = GND, current into AVIN and PVIN; max applies at TJ = 85°C 5
Undervoltage lockout threshold (falling) VUVLO 1.73 1.78 1.83 V Falling 5
Undervoltage lockout threshold (rising) VUVLO 1.9 1.95 1.99 V Rising 5
High level input voltage (ENABLE, MODE) VIH 1 6 V 2.9 V ≤ VIN ≤ 6 V 5
Low level input voltage (ENABLE, MODE) VIL 0 0.4 V 2.9 V ≤ VIN ≤ 6 V 5
Input bias current IIN 0.01 1 μA EN, mode tied to GND or AVIN; max applies at TJ = 85°C 5
High-side MOSFET on-resistance RDS(on) 120 180 mΩ VIN = 3.6 V; max applies at TJ = 85°C 5
High-side MOSFET on-resistance RDS(on) 95 150 mΩ VIN = 5 V; max applies at TJ = 85°C 5
Low-side MOSFET on-resistance RDS(on) 90 130 mΩ VIN = 3.6 V; max applies at TJ = 85°C 5
Low-side MOSFET on-resistance RDS(on) 75 100 mΩ VIN = 5 V; max applies at TJ = 85°C 5
Forward current limit MOSFET high-side and low-side ILIMF 2300 2750 3300 mA 2.9 V ≤ VIN ≤ 6 V 5
Oscillator frequency fSW 2.6 3 3.4 MHz 2.9 V ≤ VIN ≤ 6 V 5
Feedback voltage PWM mode VFB(PWM) -1.5 0 1.5 % PWM operation, MODE = VIN, 2.9 V ≤ VIN ≤ 6 V, 0 mA load 5
Internal discharge resistor R(Discharge) 75 200 1450 Ω Activated with EN = GND, 2.9 V ≤ VIN ≤ 6 V, 0.8 ≤ VOUT ≤ 3.6 V 5
Junction-to-ambient thermal resistance RθJA 65.3 °C/W 4
Junction-to-case (top) thermal resistance RθJC(top) 74.2 °C/W 4
Junction-to-board thermal resistance RθJB 35.4 °C/W 4
Junction-to-top characterization parameter ψJT 2.2 °C/W 4
Junction-to-board characterization parameter ψJB 36 °C/W 4
Junction-to-case (bottom) thermal resistance RθJC(bot) 12.8 °C/W 4

CAD (KiCad official)

  • Symbol: TPS62065DSGR
  • Footprint: Package_SON:WSON-8-1EP_2x2mm_P0.5mm_EP0.9x1.6mm
  • 3D model: WSON-8-EP(2x2) (KiCad packages3D, STEP)
  • 3D model files: tps62065dsgr-etched.step / tps62065dsgr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tps62065dsgr.step / tps62065dsgr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (30 pp, sha256 f9812a26ed207003, retrieved 2026-09-22, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF