Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

TPS62020DGQR

Texas Instruments · DC-DC Converters · HVSSOP-10-EP-0.5mm

TPS62020DGQR from Texas Instruments, in a HVSSOP-10-EP-0.5mm. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 EN input Enable: pulling EN to ground forces shutdown, pulling it to VI enables the device, and it must not be left floating.
2 VIN power_in Supply voltage input (2.5 V to 6.0 V recommended operating range).
3 VIN power_in Supply voltage input (2.5 V to 6.0 V recommended operating range).
4 GND power_in Analog ground; the PowerPAD must also be connected to GND.
5 FB input Feedback pin: connect an external resistor divider, or connect directly to the output on fixed-output versions.
6 MODE input Mode select: on TPS62020/26 pulling high forces fixed-frequency PWM and low enables Power Save Mode, while TPS62021 is active-low (low forces PWM).
7 SW bidirectional Switch pin of the converter, connected to the drain of the internal power MOSFETs.
8 SW bidirectional Switch pin of the converter, connected to the drain of the internal power MOSFETs.
9 PGND power_in Power ground.
10 PGND power_in Power ground.
11 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package HVSSOP-10-EP-0.5mm
Category Power Supply Chip
Pins 11

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input voltage range VI 2.5 6 V 3
Operating quiescent current IQ 18 35 µA IO = 0 mA, device is not switching 3
Shutdown supply current ISD 0.1 1 µA EN = GND 3
Under-voltage lockout threshold VUVLO 1.5 2.3 V 3
EN high level input voltage VEN 1.4 V 3
EN low level input voltage VEN 0.4 V 3
EN input bias current IEN 0.01 1 µA EN = GND or VIN 3
MODE high level input voltage V(MODE) 1.4 V 3
MODE low level input voltage V(MODE) 0.4 V 3
MODE input bias current I(MODE) 0.01 1 µA MODE = GND or VIN 3
P-channel MOSFET on-resistance rDS(ON) 115 210 mΩ VI = VGS = 3.6 V 3
P-channel MOSFET on-resistance rDS(ON) 145 270 mΩ VI = VGS = 2.5 V 3
P-channel leakage current Ilkg(P) 1 µA VDS = 6.0 V 3
N-channel MOSFET on-resistance rDS(ON) 85 200 mΩ VI = VGS = 3.6 V 3
N-channel MOSFET on-resistance rDS(ON) 115 280 mΩ VI = VGS = 2.5 V 3
N-channel leakage current Ikg(N) 1 µA VDS = 6.0 V 3
P-channel current limit IL 0.9 1.1 1.3 A 2.5 V < VI < 6.0 V 3
Oscillator frequency fS 1 1.25 1.5 MHz VFB = 0.5 V 3
Feedback voltage TPS62020 VFB 0 3 % TPS62020, VI = 2.5 V to 6.0 V; IO = 0 mA 3
Feedback voltage adjustable VFB -3 3 % VI = 2.5 V to 6.0 V; 0 mA ≤ IO ≤ 600 mA 3
Adjustable output voltage range VO 0.7 V TPS62020, upper limit printed as VIN 3
Leakage current into SW pin Ikg(SW) 0.1 1 µA VI > VO, 0 V≤ VSW ≤ VI 3
Reverse leakage current into pin SW Ikg(SW) 0.1 1 µA VI = open; EN = GND; VSW = 6.0 V 3
Output voltage range for adjustable output voltage version VO 0.7 V upper limit printed as VI 2
Output current IO 600 mA 2
Inductor L 3.3 10 µH Refer to application section for further information 2
Input capacitor CI 10 µF Refer to application section for further information 2
Output capacitor CO 10 µF Refer to application section for further information 2
Operating ambient temperature TA -40 85 °C 2
Operating junction temperature TJ -40 125 °C 2
Supply voltage VIN -0.3 7 V Respect to network ground 2
Voltages on EN, MODE, FB, SW -0.3 V max VCC +0.3 V 2
Operating junction temperature range TJ -40 150 °C 2
Storage temperature range Tstg -65 150 °C 2
Lead temperature (soldering) 260 °C 10 sec 2
Package power rating MSOP 1.67 W TA ≤ 25°C 2
Thermal resistance junction-to-ambient MSOP RθJA 60 °C/W soldered PowerPAD using thermal vias 2
Thermal shutdown 150 °C 3
Reference voltage Vref 0.5 V 3
Oscillator frequency short circuit f 625 kHz VFB = 0 V 3

CAD (KiCad official)

  • Symbol: TPS62020DGQR
  • Footprint: Package_SO:MSOP-10-1EP_3x3mm_P0.5mm_EP1.68x1.88mm
  • 3D model: HVSSOP-10-EP-0.5mm (KiCad packages3D, STEP)
  • 3D model files: tps62020dgqr-etched.step / tps62020dgqr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tps62020dgqr.step / tps62020dgqr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (31 pp, sha256 092ca3f3b8670f56, retrieved 2026-11-07, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF