component
TPS62004DGSR
Public Made by Adomby adom
Texas Instruments DC-DC Converters, VSSOP-10-0.5mm. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
tps62004dgsr: specified limits as data (metadata.characteristics, 46 rows from the datasheet)
2 files changed
+613−1
README.md+53@@ -28,6 +28,59 @@ TPS62004DGSR from Texas Instruments, in a VSSOP-10-0.5mm. Pinout and pin descrip | Category | Power Supply Chip | | Pins | 10 | +## Electrical characteristics++Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).++| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |+|---|---|---|---|---|---|---|---|+| VIN Input voltage range (IOUT = 0 mA to 600 mA) | VIN | 2.5 | | 5.5 | V | IOUT = 0 mA to 600 mA | 5 |+| VIN Input voltage range (IOUT = 0 mA to 200 mA) | VIN | 2 | | 5.5 | V | IOUT = 0 mA to 200 mA | 5 |+| Operating quiescent current | I(Q) | | 50 | 75 | μA | IOUT = 0 mA, SYNC = GND (PFM-mode enabled) | 5 |+| Shutdown current | I(SD) | | 0.1 | 1 | μA | EN = GND | 5 |+| EN high-level input voltage | VIH | 1.3 | | | V | | 5 |+| EN low-level input voltage | VIL | | | 0.4 | V | | 5 |+| EN input leakage current | Ilkg | | 0.01 | 0.1 | μA | EN = GND or VIN | 5 |+| Undervoltage lockout threshold | V(UVLO) | 1.2 | 1.6 | 1.95 | V | | 5 |+| P-channel current limit | I(LIM) | 800 | 1200 | 1600 | mA | 2.5 V ≤ VIN ≤ 5.5 V, ILIM = VIN | 5 |+| P-channel current limit | I(LIM) | 390 | 600 | 900 | mA | 2 V ≤ VIN ≤ 5.5 V, ILIM = GND | 5 |+| ILIM high-level input voltage | VIH | 1.3 | | | V | | 5 |+| ILIM low-level input voltage | VIL | | | 0.4 | V | | 5 |+| ILIM input leakage current | Ilkg | | 0.01 | 0.1 | μA | ILIM = GND or VIN | 5 |+| Power good threshold | V(PG) | 88 | 92 | 94 | % | Feedback voltage falling | 5 |+| PG output low voltage | VOL | | | 0.3 | V | V(FB) = 0.8 × VOUT nominal, I(sink) = 10 μA | 5 |+| PG output leakage current | Ilkg | | 0.01 | 1 | μA | V(FB) = VOUT nominal | 5 |+| Minimum supply voltage for valid power good signal | | 1.2 | | | V | | 5 |+| Oscillator frequency | fs | 500 | 750 | 1000 | kHz | | 5 |+| Synchronization range | f(SYNC) | 500 | | 1000 | kHz | CMOS-logic clock signal on SYNC pin | 5 |+| SYNC high level input voltage | VIH | 1.3 | | | V | | 5 |+| SYNC low level input voltage | VIL | | | 0.4 | V | | 5 |+| SYNC input leakage current | Ilkg | | 0.01 | 0.1 | μA | SYNC = GND or VIN | 5 |+| Duty cycle of external clock signal | | 20 | | 60 | % | | 5 |+| Fixed output voltage tolerance (TPS62004, 1.5 V) | VOUT | -3 | | 4 | % | VIN = 2.5 V to 5.5 V; 0 mA ≤ IOUT ≤ 600 mA | 6 |+| Fixed output voltage tolerance (TPS62004, 1.5 V) | VOUT | -3 | | 3 | % | 10 mA < IOUT ≤ 600 mA | 6 |+| Start-up time | | | 0.4 | 2 | ms | IOUT = 0 mA, time from active EN to VOUT | 6 |+| Supply voltage VIN (recommended) | VIN | 2 | | 5.5 | V | | 4 |+| Output current, 3-cell operation | IOUT | | | 600 | mA | VIN ≥ 2.5 V; L = 10 μH, f = 750 kHz | 4 |+| Output current, 2-cell operation | IOUT | | | 200 | mA | VIN ≥ 2 V; L = 10 μH, f = 750 kHz | 4 |+| Operating ambient temperature | TA | -40 | | 85 | °C | | 4 |+| Operating junction temperature | TJ | -40 | | 125 | °C | | 4 |+| Supply voltages on pin VIN and FC | VIN, FC | -0.3 | | 6 | V | All voltages with respect to network ground | 4 |+| Voltages on pins EN, ILIM, SYNC, PG, FB, L | | -0.3 | | | V | Maximum is printed as VIN + 0.3 V (expression, not computed) | 4 |+| Peak switch current | | | | 1.6 | A | | 4 |+| Operating junction temperature | TJ | -40 | | 150 | °C | | 4 |+| Lead temperature (soldering) | | | | 260 | °C | Soldering, 10 sec | 4 |+| Storage temperature | Tstg | -65 | | 150 | °C | | 4 |+| Junction-to-ambient thermal resistance (DGS) | RθJA | | 160 | | °C/W | | 4 |+| Junction-to-case (top) thermal resistance (DGS) | RθJC(top) | | 51 | | °C/W | | 4 |+| Junction-to-board thermal resistance (DGS) | RθJB | | 73 | | °C/W | | 4 |+| Junction-to-top characterization parameter (DGS) | ψJT | | 5 | | °C/W | | 4 |+| Junction-to-board characterization parameter (DGS) | ψJB | | 72 | | °C/W | | 4 |+| Inductor (recommended) | L | | 10 | | μH | | 4 |+| Input capacitor (recommended) | CIN | | 10 | | μF | | 4 |+| Output capacitor (recommended, VOUT ≥ 1.8 V) | COUT | | 10 | | μF | VOUT ≥ 1.8 V | 4 |+| Output capacitor (recommended, VOUT < 1.8 V) | COUT | | 47 | | μF | VOUT < 1.8 V | 4 |+ ## CAD (KiCad official) - Symbol: `TPS62004DGSR`
page.json+560−1@@ -192,6 +192,565 @@ "Package": "VSSOP-10-0.5mm", "Category": "Power Supply Chip", "Pins": "10"+ },+ "characteristics": {+ "version": 1,+ "source": "datasheet",+ "datasheet_sha256": "c0f89c845b131ca5",+ "rows": [+ {+ "name": "VIN Input voltage range (IOUT = 0 mA to 600 mA)",+ "symbol": "VIN",+ "kind": "electrical",+ "unit": "V",+ "min": 2.5,+ "typ": null,+ "max": 5.5,+ "conditions": "IOUT = 0 mA to 600 mA",+ "source_page": 5,+ "source": "datasheet"+ },+ {+ "name": "VIN Input voltage range (IOUT = 0 mA to 200 mA)",+ "symbol": "VIN",+ "kind": "electrical",+ "unit": "V",+ "min": 2,+ "typ": null,+ "max": 5.5,+ "conditions": "IOUT = 0 mA to 200 mA",+ "source_page": 5,+ "source": "datasheet"+ },+ {+ "name": "Operating quiescent current",+ "symbol": "I(Q)",+ "kind": "electrical",+ "unit": "μA",+ "min": null,+ "typ": 50,+ "max": 75,+ "conditions": "IOUT = 0 mA, SYNC = GND (PFM-mode enabled)",+ "source_page": 5,+ "source": "datasheet"+ },+ {+ "name": "Shutdown current",+ "symbol": "I(SD)",+ "kind": "electrical",+ "unit": "μA",+ "min": null,+ "typ": 0.1,+ "max": 1,+ "conditions": "EN = GND",+ "source_page": 5,+ "source": "datasheet"+ },+ {+ "name": "EN high-level input voltage",+ "symbol": "VIH",+ "kind": "electrical",+ "unit": "V",+ "min": 1.3,+ "typ": null,+ "max": null,+ "conditions": "",+ "source_page": 5,+ "source": "datasheet"+ },+ {+ "name": "EN low-level input voltage",+ "symbol": "VIL",+ "kind": "electrical",+ "unit": "V",+ "min": null,+ "typ": null,+ "max": 0.4,+ "conditions": "",+ "source_page": 5,+ "source": "datasheet"+ },+ {+ "name": "EN input leakage current",+ "symbol": "Ilkg",+ "kind": "electrical",+ "unit": "μA",+ "min": null,+ "typ": 0.01,+ "max": 0.1,+ "conditions": "EN = GND or VIN",+ "source_page": 5,+ "source": "datasheet"+ },+ {+ "name": "Undervoltage lockout threshold",+ "symbol": "V(UVLO)",+ "kind": "electrical",+ "unit": "V",+ "min": 1.2,+ "typ": 1.6,+ "max": 1.95,+ "conditions": "",+ "source_page": 5,+ "source": "datasheet"+ },+ {+ "name": "P-channel current limit",+ "symbol": "I(LIM)",+ "kind": "electrical",+ "unit": "mA",+ "min": 800,+ "typ": 1200,+ "max": 1600,+ "conditions": "2.5 V ≤ VIN ≤ 5.5 V, ILIM = VIN",+ "source_page": 5,+ "source": "datasheet"+ },+ {+ "name": "P-channel current limit",+ "symbol": "I(LIM)",+ "kind": "electrical",+ "unit": "mA",+ "min": 390,+ "typ": 600,+ "max": 900,+ "conditions": "2 V ≤ VIN ≤ 5.5 V, ILIM = GND",+ "source_page": 5,+ "source": "datasheet"+ },+ {+ "name": "ILIM high-level input voltage",+ "symbol": "VIH",+ "kind": "electrical",+ "unit": "V",+ "min": 1.3,+ "typ": null,+ "max": null,+ "conditions": "",+ "source_page": 5,+ "source": "datasheet"+ },+ {+ "name": "ILIM low-level input voltage",+ "symbol": "VIL",+ "kind": "electrical",+ "unit": "V",+ "min": null,+ "typ": null,+ "max": 0.4,+ "conditions": "",+ "source_page": 5,+ "source": "datasheet"+ },+ {+ "name": "ILIM input leakage current",+ "symbol": "Ilkg",+ "kind": "electrical",+ "unit": "μA",+ "min": null,+ "typ": 0.01,+ "max": 0.1,+ "conditions": "ILIM = GND or VIN",+ "source_page": 5,+ "source": "datasheet"+ },+ {+ "name": "Power good threshold",+ "symbol": "V(PG)",+ "kind": "electrical",+ "unit": "%",+ "min": 88,+ "typ": 92,+ "max": 94,+ "conditions": "Feedback voltage falling",+ "source_page": 5,+ "source": "datasheet"+ },+ {+ "name": "PG output low voltage",+ "symbol": "VOL",+ "kind": "electrical",+ "unit": "V",+ "min": null,+ "typ": null,+ "max": 0.3,+ "conditions": "V(FB) = 0.8 × VOUT nominal, I(sink) = 10 μA",+ "source_page": 5,+ "source": "datasheet"+ },+ {+ "name": "PG output leakage current",+ "symbol": "Ilkg",+ "kind": "electrical",+ "unit": "μA",+ "min": null,+ "typ": 0.01,+ "max": 1,+ "conditions": "V(FB) = VOUT nominal",+ "source_page": 5,+ "source": "datasheet"+ },+ {+ "name": "Minimum supply voltage for valid power good signal",+ "symbol": "",+ "kind": "electrical",+ "unit": "V",+ "min": 1.2,+ "typ": null,+ "max": null,+ "conditions": "",+ "source_page": 5,+ "source": "datasheet"+ },+ {+ "name": "Oscillator frequency",+ "symbol": "fs",+ "kind": "electrical",+ "unit": "kHz",+ "min": 500,+ "typ": 750,+ "max": 1000,+ "conditions": "",+ "source_page": 5,+ "source": "datasheet"+ },+ {+ "name": "Synchronization range",+ "symbol": "f(SYNC)",+ "kind": "electrical",+ "unit": "kHz",+ "min": 500,+ "typ": null,+ "max": 1000,+ "conditions": "CMOS-logic clock signal on SYNC pin",+ "source_page": 5,+ "source": "datasheet"+ },+ {+ "name": "SYNC high level input voltage",+ "symbol": "VIH",+ "kind": "electrical",+ "unit": "V",+ "min": 1.3,+ "typ": null,+ "max": null,+ "conditions": "",+ "source_page": 5,+ "source": "datasheet"+ },+ {+ "name": "SYNC low level input voltage",+ "symbol": "VIL",+ "kind": "electrical",+ "unit": "V",+ "min": null,+ "typ": null,+ "max": 0.4,+ "conditions": "",+ "source_page": 5,+ "source": "datasheet"+ },+ {+ "name": "SYNC input leakage current",+ "symbol": "Ilkg",+ "kind": "electrical",+ "unit": "μA",+ "min": null,+ "typ": 0.01,+ "max": 0.1,+ "conditions": "SYNC = GND or VIN",+ "source_page": 5,+ "source": "datasheet"+ },+ {+ "name": "Duty cycle of external clock signal",+ "symbol": "",+ "kind": "electrical",+ "unit": "%",+ "min": 20,+ "typ": null,+ "max": 60,+ "conditions": "",+ "source_page": 5,+ "source": "datasheet"+ },+ {+ "name": "Fixed output voltage tolerance (TPS62004, 1.5 V)",+ "symbol": "VOUT",+ "kind": "tolerance",+ "unit": "%",+ "min": -3,+ "typ": null,+ "max": 4,+ "conditions": "VIN = 2.5 V to 5.5 V; 0 mA ≤ IOUT ≤ 600 mA",+ "source_page": 6,+ "source": "datasheet"+ },+ {+ "name": "Fixed output voltage tolerance (TPS62004, 1.5 V)",+ "symbol": "VOUT",+ "kind": "tolerance",+ "unit": "%",+ "min": -3,+ "typ": null,+ "max": 3,+ "conditions": "10 mA < IOUT ≤ 600 mA",+ "source_page": 6,+ "source": "datasheet"+ },+ {+ "name": "Start-up time",+ "symbol": "",+ "kind": "electrical",+ "unit": "ms",+ "min": null,+ "typ": 0.4,+ "max": 2,+ "conditions": "IOUT = 0 mA, time from active EN to VOUT",+ "source_page": 6,+ "source": "datasheet"+ },+ {+ "name": "Supply voltage VIN (recommended)",+ "symbol": "VIN",+ "kind": "recommended_operating",+ "unit": "V",+ "min": 2,+ "typ": null,+ "max": 5.5,+ "conditions": "",+ "source_page": 4,+ "source": "datasheet"+ },+ {+ "name": "Output current, 3-cell operation",+ "symbol": "IOUT",+ "kind": "recommended_operating",+ "unit": "mA",+ "min": null,+ "typ": null,+ "max": 600,+ "conditions": "VIN ≥ 2.5 V; L = 10 μH, f = 750 kHz",+ "source_page": 4,+ "source": "datasheet"+ },+ {+ "name": "Output current, 2-cell operation",+ "symbol": "IOUT",+ "kind": "recommended_operating",+ "unit": "mA",+ "min": null,+ "typ": null,+ "max": 200,+ "conditions": "VIN ≥ 2 V; L = 10 μH, f = 750 kHz",+ "source_page": 4,+ "source": "datasheet"+ },+ {+ "name": "Operating ambient temperature",+ "symbol": "TA",+ "kind": "recommended_operating",+ "unit": "°C",+ "min": -40,+ "typ": null,+ "max": 85,+ "conditions": "",+ "source_page": 4,+ "source": "datasheet"+ },+ {+ "name": "Operating junction temperature",+ "symbol": "TJ",+ "kind": "recommended_operating",+ "unit": "°C",+ "min": -40,+ "typ": null,+ "max": 125,+ "conditions": "",+ "source_page": 4,+ "source": "datasheet"+ },+ {+ "name": "Supply voltages on pin VIN and FC",+ "symbol": "VIN, FC",+ "kind": "absolute_maximum",+ "unit": "V",+ "min": -0.3,+ "typ": null,+ "max": 6,+ "conditions": "All voltages with respect to network ground",+ "source_page": 4,+ "source": "datasheet"+ },+ {+ "name": "Voltages on pins EN, ILIM, SYNC, PG, FB, L",+ "symbol": "",+ "kind": "absolute_maximum",+ "unit": "V",+ "min": -0.3,+ "typ": null,+ "max": null,+ "conditions": "Maximum is printed as VIN + 0.3 V (expression, not computed)",+ "source_page": 4,+ "source": "datasheet"+ },+ {+ "name": "Peak switch current",+ "symbol": "",+ "kind": "absolute_maximum",+ "unit": "A",+ "min": null,+ "typ": null,+ "max": 1.6,+ "conditions": "",+ "source_page": 4,+ "source": "datasheet"+ },+ {+ "name": "Operating junction temperature",+ "symbol": "TJ",+ "kind": "absolute_maximum",+ "unit": "°C",+ "min": -40,+ "typ": null,+ "max": 150,+ "conditions": "",+ "source_page": 4,+ "source": "datasheet"+ },+ {+ "name": "Lead temperature (soldering)",+ "symbol": "",+ "kind": "absolute_maximum",+ "unit": "°C",+ "min": null,+ "typ": null,+ "max": 260,+ "conditions": "Soldering, 10 sec",+ "source_page": 4,+ "source": "datasheet"+ },+ {+ "name": "Storage temperature",+ "symbol": "Tstg",+ "kind": "absolute_maximum",+ "unit": "°C",+ "min": -65,+ "typ": null,+ "max": 150,+ "conditions": "",+ "source_page": 4,+ "source": "datasheet"+ },+ {+ "name": "Junction-to-ambient thermal resistance (DGS)",+ "symbol": "RθJA",+ "kind": "thermal",+ "unit": "°C/W",+ "min": null,+ "typ": 160,+ "max": null,+ "conditions": "",+ "source_page": 4,+ "source": "datasheet"+ },+ {+ "name": "Junction-to-case (top) thermal resistance (DGS)",+ "symbol": "RθJC(top)",+ "kind": "thermal",+ "unit": "°C/W",+ "min": null,+ "typ": 51,+ "max": null,+ "conditions": "",+ "source_page": 4,+ "source": "datasheet"+ },+ {+ "name": "Junction-to-board thermal resistance (DGS)",+ "symbol": "RθJB",+ "kind": "thermal",+ "unit": "°C/W",+ "min": null,+ "typ": 73,+ "max": null,+ "conditions": "",+ "source_page": 4,+ "source": "datasheet"+ },+ {+ "name": "Junction-to-top characterization parameter (DGS)",+ "symbol": "ψJT",+ "kind": "thermal",+ "unit": "°C/W",+ "min": null,+ "typ": 5,+ "max": null,+ "conditions": "",+ "source_page": 4,+ "source": "datasheet"+ },+ {+ "name": "Junction-to-board characterization parameter (DGS)",+ "symbol": "ψJB",+ "kind": "thermal",+ "unit": "°C/W",+ "min": null,+ "typ": 72,+ "max": null,+ "conditions": "",+ "source_page": 4,+ "source": "datasheet"+ },+ {+ "name": "Inductor (recommended)",+ "symbol": "L",+ "kind": "recommended_operating",+ "unit": "μH",+ "min": null,+ "typ": 10,+ "max": null,+ "conditions": "",+ "source_page": 4,+ "source": "datasheet"+ },+ {+ "name": "Input capacitor (recommended)",+ "symbol": "CIN",+ "kind": "recommended_operating",+ "unit": "μF",+ "min": null,+ "typ": 10,+ "max": null,+ "conditions": "",+ "source_page": 4,+ "source": "datasheet"+ },+ {+ "name": "Output capacitor (recommended, VOUT ≥ 1.8 V)",+ "symbol": "COUT",+ "kind": "recommended_operating",+ "unit": "μF",+ "min": null,+ "typ": 10,+ "max": null,+ "conditions": "VOUT ≥ 1.8 V",+ "source_page": 4,+ "source": "datasheet"+ },+ {+ "name": "Output capacitor (recommended, VOUT < 1.8 V)",+ "symbol": "COUT",+ "kind": "recommended_operating",+ "unit": "μF",+ "min": null,+ "typ": 47,+ "max": null,+ "conditions": "VOUT < 1.8 V",+ "source_page": 4,+ "source": "datasheet"+ }+ ] } }, "variants": [],@@ -233,4 +792,4 @@ "visibility": { "public": true }-}+}