component
TPS62000DGSR
Public Made by Adomby adom
Texas Instruments DC-DC Converters, VSSOP-10-0.5mm. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownTPS62000DGSR
Texas Instruments · DC-DC Converters · VSSOP-10-0.5mm
TPS62000DGSR from Texas Instruments, in a VSSOP-10-0.5mm. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Supply voltage input operating from 2 V to 5.5 V. |
| 2 | FC | passive | Supply bypass pin requiring 0.1-μF coupling capacitor placed as close as possible for high-frequency input supply filtering. |
| 3 | GND | power_in | Ground reference. |
| 4 | PG | tri_state | Open-drain power good comparator output that goes active high when output voltage exceeds 92% of nominal value. |
| 5 | FB | input | Feedback input for fixed output voltage versions or external resistive divider connection point for adjustable output versions. |
| 6 | ILIM | input | Current limit selection pin: connect to GND for 600-mA or to VIN for 1200-mA switch current limit. |
| 7 | SYNC | input | External clock synchronization input accepting CMOS-level signals; high enables low-noise PWM mode, low enables power-save PFM/PWM mode. |
| 8 | EN | input | Logic input for converter enable control; high enables operation, low forces shutdown reducing supply current to less than 1 μA. |
| 9 | L | bidirectional | Inductor connection point as the switch node connected to the drain of internal power MOSFETs. |
| 10 | PGND | power_in | Power ground return path; connect all power grounds to this pin. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VSSOP-10-0.5mm |
| Category | Power Management (PMIC) |
| Pins | 10 |
CAD (KiCad official)
- Symbol:
TPS62000DGSR - Footprint:
Package_SO:MSOP-10_3x3mm_P0.5mm - 3D model: VSSOP-10-0.5mm (KiCad packages3D, STEP)
- 3D model files:
tps62000dgsr-etched.step/tps62000dgsr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tps62000dgsr.step/tps62000dgsr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (32 pp, sha256
c0f89c845b131ca5, retrieved 2026-10-03, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).