TPS61200
Public Made by Adomby adom
TI low-input-voltage synchronous boost converter, VSON-10. Starts from 0.3 V, up to 5.5 V out, down-conversion mode. Datasheet-verified.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗PCB Footprint
Open full view ↗Datasheet
Open in new tab ↗Contents
README
markdownTPS61200
Texas Instruments · Switching regulator (boost) · VSON-10
Boosts an input as low as 0.3 V once running, up to a regulated rail as high as 5.5 V, so it runs from a single cell or a nearly-flat battery. The synchronous switches reach 1.3 A peak, a resistor divider at FB sets the output, and an adjustable UVLO (via the UVLO pin) protects the source. It can also pass through or down-convert when the input exceeds the output. Power-save mode keeps light-load efficiency high. Common in single-cell and energy-harvesting supplies.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VAUX | power_in | Supply voltage for control stage. Provides bias to the internal control circuitry; typically tied to VOUT for boost operation. |
| 2 | VOUT | power_out | Boost converter output. Regulated output rail (1.8 V to 5.5 V adjustable, or fixed 3.3 V / 5 V depending on device option); connect the output filter capacitor here. |
| 3 | L | passive | Switch node / connection for the boost inductor (typ. 2.2 µH). Ties the internal high-side and low-side power MOSFETs to the external inductor. |
| 4 | PGND | power_in | Power ground. Return path for the internal power MOSFETs; must be connected to the exposed thermal pad and to the system ground plane with a low-impedance path. |
| 5 | VIN | power_in | Boost converter input voltage. Operating input range 0.3 V to 5.5 V; startup into full load at 0.5 V. |
| 6 | EN | input | Enable input (High = enabled, Low = disabled). Do not leave floating. |
| 7 | UVLO | input | Undervoltage lockout comparator input. Sets the programmable input UVLO threshold via a resistor divider; must be tied to VAUX if not used. |
| 8 | PS | input | Power Save mode select (High = Power Save disabled / forced fixed-frequency PWM, Low = Power Save enabled). Do not leave floating. |
| 9 | GND | power_in | Control / logic ground. Analog / signal ground return for the control circuitry. |
| 10 | FB | input | Voltage feedback input. For adjustable versions, connect to the resistor divider from VOUT (typ. 500 mV reference). For fixed-output versions, must be tied directly to VOUT. |
| PAD | EP | power_in | Exposed thermal pad. Must be soldered to achieve appropriate power dissipation and mechanical reliability; connect to PGND. |
Key specifications
| Parameter | Value |
|---|---|
| Type | Synchronous boost converter |
| Input | 0.3-5.5 V (start-up from 0.5 V) |
| Output | Up to 5.5 V (adjustable) |
| Switch current limit | 1.3 A |
| Features | Down-conversion mode, adjustable UVLO, power-save |
| Quiescent current | 55 uA (typ) |
| Package | VSON-10 |
Ordering variants
Same part, different packaging or reel option.
TPS61201DRCR (fixed 3.3 V)TPS61202DRCR (fixed 5.0 V)
Related parts (NOT interchangeable)
The extractor listed these alongside TPS61200, but they are different parts with different electrical characteristics. Do not order them as substitutes.
TPS61200DRCR (VSON-10, adjustable)
CAD (KiCad official)
- Symbol:
Regulator_Switching:TPS61200DRC (KiCad official) - Footprint:
Package_SON:Texas_S-PVSON-N10_ThermalVias - 3D model: VSON-10 (KiCad packages3D, STEP)
- 3D model files:
tps61200-etched.step/tps61200-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tps61200.step/tps61200.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (35 pp, sha256
92eacd5f57fe3096, retrieved 2026-08-17, tier: manufacturer) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).