main
Ray Publish 0.1.0 8118a3a
{
  "slug": "tps61196pwprq1",
  "version": "0.1.0",
  "type": "component",
  "description": "Texas Instruments LED Drivers, HTSSOP-28-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "display modules - led drivers - display drivers",
    "tps61196pwprq1",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "tps61196pwprq1.kicad_sym",
    "tps61196pwprq1.kicad_mod",
    "tps61196pwprq1.glb",
    "tps61196pwprq1.step",
    "tps61196pwprq1.lbr",
    "docs/hero.png",
    "docs/tps61196pwprq1-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "tps61196pwprq1-hero.glb",
    "tps61196pwprq1-hero.overlay.json",
    "tps61196pwprq1-etched.glb"
  ],
  "component": {
    "mpn": "TPS61196PWPRQ1",
    "manufacturer": "Texas Instruments",
    "package": "HTSSOP-28-EP",
    "pin_count": 29,
    "category": "Display Modules / LED Drivers / Display Drivers",
    "subcategory": "LED Drivers",
    "datasheet": "https://www.ti.com/lit/ds/symlink/tps61196pwprq1.pdf",
    "parts": {
      "symbol": "tps61196pwprq1.kicad_sym",
      "footprint": "tps61196pwprq1.kicad_mod",
      "model_3d": "tps61196pwprq1-hero.glb",
      "model_3d_plain": "tps61196pwprq1-etched.glb",
      "model_3d_step": "tps61196pwprq1-etched.step",
      "model_3d_step_plain": "tps61196pwprq1.step",
      "lbr": "tps61196pwprq1.lbr"
    },
    "distributor_links": {
      "lcsc": "C213570",
      "digikey": "296-42053-2-ND",
      "mouser": "595-TPS61196PWPRQ1"
    },
    "distributor_check": {
      "checked_at": "2026-10-23T09:15:10Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "296-42053-2-ND",
        "status": "found",
        "lifecycle": "Active"
      },
      "mouser": {
        "pn": "595-TPS61196PWPRQ1",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "UVLO",
        "type": "input",
        "description": "Low input voltage lockout; use a resistor divider from VIN to this pin to set the UVLO threshold (1.229-V threshold, pull up to VDD if unused)."
      },
      {
        "number": "2",
        "name": "EN",
        "type": "input",
        "description": "Enable pin, high = enable and low = disable (enabled above 1.8 V, disabled below 1 V)."
      },
      {
        "number": "3",
        "name": "PWM1",
        "type": "input",
        "description": "PWM dimming signal input for string 1, with a PWM frequency range of 90 Hz to 22 kHz."
      },
      {
        "number": "4",
        "name": "PWM2",
        "type": "input",
        "description": "PWM dimming signal input for string 2, with a PWM frequency range of 90 Hz to 22 kHz."
      },
      {
        "number": "5",
        "name": "PWM3",
        "type": "input",
        "description": "PWM dimming signal input for string 3, with a PWM frequency range of 90 Hz to 22 kHz."
      },
      {
        "number": "6",
        "name": "PWM4",
        "type": "input",
        "description": "PWM dimming signal input for string 4, with a PWM frequency range of 90 Hz to 22 kHz."
      },
      {
        "number": "7",
        "name": "PWM5",
        "type": "input",
        "description": "PWM dimming signal input for string 5, with a PWM frequency range of 90 Hz to 22 kHz."
      },
      {
        "number": "8",
        "name": "PWM6",
        "type": "input",
        "description": "PWM dimming signal input for string 6, with a PWM frequency range of 90 Hz to 22 kHz."
      },
      {
        "number": "9",
        "name": "FBP",
        "type": "passive",
        "description": "LED cross-short protection threshold program pin; use a resistor to GND to set the threshold."
      },
      {
        "number": "10",
        "name": "ISET",
        "type": "passive",
        "description": "A resistor on this pin programs the IFB pin current level for full (100% dimming) brightness; sourcing more than 150 µA disables the current sinks."
      },
      {
        "number": "11",
        "name": "IFBV",
        "type": "passive",
        "description": "Minimum feedback voltage setting for the LED strings."
      },
      {
        "number": "12",
        "name": "IFB1",
        "type": "input",
        "description": "Regulated current sink input for LED string 1."
      },
      {
        "number": "13",
        "name": "IFB2",
        "type": "input",
        "description": "Regulated current sink input for LED string 2."
      },
      {
        "number": "14",
        "name": "IFB3",
        "type": "input",
        "description": "Regulated current sink input for LED string 3."
      },
      {
        "number": "15",
        "name": "IFB4",
        "type": "input",
        "description": "Regulated current sink input for LED string 4."
      },
      {
        "number": "16",
        "name": "IFB5",
        "type": "input",
        "description": "Regulated current sink input for LED string 5."
      },
      {
        "number": "17",
        "name": "IFB6",
        "type": "input",
        "description": "Regulated current sink input for LED string 6."
      },
      {
        "number": "18",
        "name": "AGND",
        "type": "power_in",
        "description": "Analog ground."
      },
      {
        "number": "19",
        "name": "OVP",
        "type": "input",
        "description": "Overvoltage protection detection input; connect a resistor divider from the output to this pin to program the OVP threshold."
      },
      {
        "number": "20",
        "name": "COMP",
        "type": "output",
        "description": "Loop compensation output for the boost converter; connect an RC network to make the loop stable."
      },
      {
        "number": "21",
        "name": "REF",
        "type": "output",
        "description": "Internal reference voltage for the boost converter; a capacitor (1 µF to 4.7 µF) sets the soft-start time, and in parallel operation the master's REF connects to the slave's COMP."
      },
      {
        "number": "22",
        "name": "PGND",
        "type": "power_in",
        "description": "External MOSFET current sense ground."
      },
      {
        "number": "23",
        "name": "ISNS",
        "type": "input",
        "description": "External MOSFET current sense positive input (connected to ground on a slave device)."
      },
      {
        "number": "24",
        "name": "GDRV",
        "type": "output",
        "description": "External switch MOSFET gate driver output."
      },
      {
        "number": "25",
        "name": "VDD",
        "type": "power_out",
        "description": "Internal regulator output for device internal supply; connect a 1-µF ceramic capacitor, with 15 mA sourcing capability."
      },
      {
        "number": "26",
        "name": "FSW",
        "type": "bidirectional",
        "description": "Switching frequency setting pin using a resistor for 100 kHz to 800 kHz; an external voltage above 3.5 V or below 0.5 V disables the internal clock and makes the device a slave."
      },
      {
        "number": "27",
        "name": "FAULT",
        "type": "output",
        "description": "Fault indicator, open-drain output that goes high impedance when a fault condition occurs."
      },
      {
        "number": "28",
        "name": "VIN",
        "type": "power_in",
        "description": "Power supply input pin (8 V to 30 V operating range)."
      },
      {
        "number": "29",
        "name": "EP",
        "type": "passive",
        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-sonnet-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The datasheet shows a thermal pad (exposed pad) in the schematic but gives no pin number or name for; The datasheet lists FBP, ISET and IFBV as 'O' (output), but they are resistor-programming pins. I se; The pin table text is garbled by extraction (the PWM1-6 and IFB1-6 rows are merged). Pin numbers wer"
        ],
        "pages_sent": 13,
        "cost_usd": 0.1541,
        "at": "2026-10-23T09:14:53"
      },
      "datasheet": {
        "url": "https://www.ti.com/lit/ds/symlink/tps61196pwprq1.pdf",
        "pages": 31,
        "sha256": "b02217759d35bad7",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 29,
        "described": 29,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "tps61196pwprq1.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          7.2,
          9.7,
          1.05
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "ff242f1d3be9d09e7f929707a2c5b1ee974a4f882053b04bcdb1cd2cb21223ef",
        "checked": "2026-10-23",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "tps61196pwprq1-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          7.2,
          9.7,
          1.05
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "dc372ddebe2d7fbd8c4637bc54d723a422d5cb83851bb76a42505b447ae698cd",
        "checked": "2026-10-23",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}