component
TPS61194PWPRQ1
Public Made by Adomby adom
Texas Instruments LED Drivers, HTSSOP-20-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownTPS61194PWPRQ1
Texas Instruments · LED Drivers · HTSSOP-20-EP
TPS61194PWPRQ1 from Texas Instruments, in a HTSSOP-20-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Input power pin. |
| 2 | LDO | power_out | Output of internal LDO; connect a 1-μF decoupling capacitor between this pin and noise-free GND. |
| 3 | FSET | input | DC-DC (boost or SEPIC) switching frequency setting resistor; for normal operation, resistor value from 24 kΩ to 219 kΩ must be connected between this pin and ground. |
| 4 | VDDIO/EN | power_in | Enable input for the device as well as supply input (VDDIO) for digital pins. |
| 5 | FAULT | output | Fault signal output; if unused, the pin may be left floating. |
| 6 | SYNC | input | Input for synchronizing boost; if synchronization is not used, connect this pin to GND to disable spread spectrum or to VDDIO/EN to enable spread spectrum. |
| 7 | PWM | input | PWM dimming input. |
| 8 | NC | unconnected | No connect. |
| 9 | GND | power_in | Ground. |
| 10 | ISET | input | LED current setting resistor; for normal operation, resistor value from 24 kΩ to 129 kΩ must be connected between this pin and ground. |
| 11 | GND | power_in | Ground. |
| 12 | OUT4 | output | Current sink output; this pin must be connected to GND if not used. |
| 13 | OUT3 | output | Current sink output; this pin must be connected to GND if not used. |
| 14 | OUT2 | output | Current sink output; this pin must be connected to GND if not used. |
| 15 | OUT1 | output | Current sink output; this pin must be connected to GND if not used. |
| 16 | FB | input | DC-DC (boost or SEPIC) feedback input; for normal operation this pin must be connected to the middle of a resistor divider between VOUT and ground using feedback resistor values from 5 kΩ to 150 kΩ. |
| 17 | PGND | power_in | DC-DC (boost or SEPIC) power ground. |
| 18 | SW | output | DC-DC (boost or SEPIC) switch pin. |
| 19 | NC | unconnected | No connect. |
| 20 | VIN | power_in | Input power pin. |
| 21 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | HTSSOP-20-EP |
| Category | Nixie Tube Driver/LED Driver |
| Pins | 21 |
CAD (KiCad official)
- Symbol:
TPS61194PWPRQ1 - Footprint:
Package_SO:TSSOP-20-1EP_4.4x6.5mm_P0.65mm_EP2.15x3.35mm - 3D model: HTSSOP-20-EP, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.2 mm nominal TSSOP height). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions are nominal, not the manufacturer's CAD (STEP)
- 3D model files:
tps61194pwprq1-etched.step/tps61194pwprq1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tps61194pwprq1.step/tps61194pwprq1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (35 pp, sha256
c2b5f35576d14f00, retrieved 2026-10-05, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).