component
TPS61181ARTER
Public Made by Adomby adom
Texas Instruments LED Drivers, WQFN-16-EP(3x3). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+54@@ -0,0 +1,54 @@+# TPS61181ARTER++**Texas Instruments** · LED Drivers · WQFN-16-EP(3x3)++TPS61181ARTER from Texas Instruments, in a WQFN-16-EP(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | PGND | power_in | Power ground of the IC internally connected to the PWM switch source. |+| 2 | SW | output | Switching node connected to internal PWM switch drain, external Schottky diode and inductor. |+| 3 | VBAT | power_in | Battery supply input (4.5 to 24 V) providing pull-up voltage for Fault pin and input to internal LDO. |+| 4 | VO | output | Boost regulator output voltage monitoring pin (up to 38 V) connected to anode of WLED strings. |+| 5 | ISET | input | Resistor pin programming WLED output current. |+| 6 | Cin | power_in | LDO output supply voltage (2.7 to 3.6 V) requiring 0.1 μF bypass capacitor. |+| 7 | IFB1 | input | Current sink input (max 30 mA per channel) connected to WLED cathode and regulated to 400 mV by PWM loop. |+| 8 | IFB2 | input | Current sink input (max 30 mA per channel) connected to WLED cathode and regulated to 400 mV by PWM loop. |+| 9 | IFB3 | input | Current sink input (max 30 mA per channel) connected to WLED cathode and regulated to 400 mV by PWM loop. |+| 10 | GND | power_in | Signal ground of the IC. |+| 11 | DCTRL | input | Dimming control logic input (0 to 20 V) operating at 100 Hz to 1 kHz frequency. |+| 12 | IFB4 | input | Current sink input (max 30 mA per channel) connected to WLED cathode and regulated to 400 mV by PWM loop. |+| 13 | IFB5 | input | Current sink input (max 30 mA per channel) connected to WLED cathode and regulated to 400 mV by PWM loop. |+| 14 | IFB6 | input | Current sink input (max 30 mA per channel) connected to WLED cathode and regulated to 400 mV by PWM loop. |+| 15 | EN | input | Enable input (0 to 20 V); logic high enables IC and internal LDO. |+| 16 | Fault | output | Gate driver output providing pull-down drive to external PFET and fault reporting. |+| 17 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | WQFN-16-EP(3x3) |+| Category | LED Drivers |+| Pins | 17 |++## CAD (KiCad official)++- Symbol: `TPS61181ARTER`+- Footprint: `Package_DFN_QFN:QFN-16-1EP_3x3mm_P0.5mm_EP1.7x1.7mm`+- 3D model: WQFN-16-EP(3x3) (KiCad packages3D, STEP)+- 3D model files: `tps61181arter-etched.step` / `tps61181arter-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tps61181arter.step` / `tps61181arter.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/tps61181a) (30 pp, sha256 `a22c966358df4bb3`, retrieved 2026-09-27, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/tps61181arter-datasheet.pdf)
page.jsonadded+213@@ -0,0 +1,213 @@+{+ "slug": "tps61181arter",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments LED Drivers, WQFN-16-EP(3x3). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "led drivers",+ "tps61181arter",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "tps61181arter.kicad_sym",+ "tps61181arter.kicad_mod",+ "tps61181arter.glb",+ "tps61181arter.step",+ "tps61181arter.lbr",+ "docs/hero.png",+ "docs/tps61181arter-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "component": {+ "mpn": "TPS61181ARTER",+ "manufacturer": "Texas Instruments",+ "package": "WQFN-16-EP(3x3)",+ "pin_count": 17,+ "category": "LED Drivers",+ "subcategory": "LED Drivers",+ "datasheet": "https://www.ti.com/cn/lit/gpn/tps61181a",+ "parts": {+ "symbol": "tps61181arter.kicad_sym",+ "footprint": "tps61181arter.kicad_mod",+ "model_3d": "tps61181arter-etched.glb",+ "model_3d_plain": "tps61181arter.glb",+ "model_3d_step": "tps61181arter-etched.step",+ "model_3d_step_plain": "tps61181arter.step",+ "lbr": "tps61181arter.lbr"+ },+ "distributor_links": {+ "lcsc": "C2679379",+ "digikey": "296-38818-2-ND",+ "mouser": "595-TPS61181ARTER"+ },+ "distributor_check": {+ "checked_at": "2026-09-27T07:02:08Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": "296-38818-2-ND",+ "status": "found",+ "lifecycle": "Active"+ },+ "mouser": {+ "pn": "595-TPS61181ARTER",+ "status": "found"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "PGND",+ "type": "power_in",+ "description": "Power ground of the IC internally connected to the PWM switch source."+ },+ {+ "number": "2",+ "name": "SW",+ "type": "output",+ "description": "Switching node connected to internal PWM switch drain, external Schottky diode and inductor."+ },+ {+ "number": "3",+ "name": "VBAT",+ "type": "power_in",+ "description": "Battery supply input (4.5 to 24 V) providing pull-up voltage for Fault pin and input to internal LDO."+ },+ {+ "number": "4",+ "name": "VO",+ "type": "output",+ "description": "Boost regulator output voltage monitoring pin (up to 38 V) connected to anode of WLED strings."+ },+ {+ "number": "5",+ "name": "ISET",+ "type": "input",+ "description": "Resistor pin programming WLED output current."+ },+ {+ "number": "6",+ "name": "Cin",+ "type": "power_in",+ "description": "LDO output supply voltage (2.7 to 3.6 V) requiring 0.1 μF bypass capacitor."+ },+ {+ "number": "7",+ "name": "IFB1",+ "type": "input",+ "description": "Current sink input (max 30 mA per channel) connected to WLED cathode and regulated to 400 mV by PWM loop."+ },+ {+ "number": "8",+ "name": "IFB2",+ "type": "input",+ "description": "Current sink input (max 30 mA per channel) connected to WLED cathode and regulated to 400 mV by PWM loop."+ },+ {+ "number": "9",+ "name": "IFB3",+ "type": "input",+ "description": "Current sink input (max 30 mA per channel) connected to WLED cathode and regulated to 400 mV by PWM loop."+ },+ {+ "number": "10",+ "name": "GND",+ "type": "power_in",+ "description": "Signal ground of the IC."+ },+ {+ "number": "11",+ "name": "DCTRL",+ "type": "input",+ "description": "Dimming control logic input (0 to 20 V) operating at 100 Hz to 1 kHz frequency."+ },+ {+ "number": "12",+ "name": "IFB4",+ "type": "input",+ "description": "Current sink input (max 30 mA per channel) connected to WLED cathode and regulated to 400 mV by PWM loop."+ },+ {+ "number": "13",+ "name": "IFB5",+ "type": "input",+ "description": "Current sink input (max 30 mA per channel) connected to WLED cathode and regulated to 400 mV by PWM loop."+ },+ {+ "number": "14",+ "name": "IFB6",+ "type": "input",+ "description": "Current sink input (max 30 mA per channel) connected to WLED cathode and regulated to 400 mV by PWM loop."+ },+ {+ "number": "15",+ "name": "EN",+ "type": "input",+ "description": "Enable input (0 to 20 V); logic high enables IC and internal LDO."+ },+ {+ "number": "16",+ "name": "Fault",+ "type": "output",+ "description": "Gate driver output providing pull-down drive to external PFET and fault reporting."+ },+ {+ "number": "17",+ "name": "EP",+ "type": "passive",+ "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.2",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.2",+ "primary_model": "claude-haiku-4-5-20251001",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-4-6",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "extractor flagged: Fault pin (pin 16) is marked as input 'I' in PIN ASSIGNMENTS table on page 5, but the description cl",+ "exposed pad 17 added from the footprint"+ ],+ "pages_sent": 30,+ "cost_usd": 0.3428,+ "at": "2026-09-27T07:01:52"+ },+ "datasheet": {+ "url": "https://www.ti.com/cn/lit/gpn/tps61181a",+ "pages": 30,+ "sha256": "a22c966358df4bb3",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 17,+ "described": 17,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}